610365
8
Zoom out
Zoom in
Previous page
1/192
Next page
8
Step 2 Preparing the power supply
The following power supplies can be used with the camcorder.
BP-L40 (A)/L60A/L90A lithium-ion battery pack
NP-1B Ni-Cd Battery Pack (The DC-L1Battery Adaptor is required.)
BP-90A Ni-Cd Battery Pack (The DC-L90 Battery Adaptor is required.)
AC power (The AC-550, AC-DN1/DN2A, or CMA-8A AC Adaptor is required.)
Alternatively, you can make combined use of internal and external batteries, by
mounting one of the above batteries as an internal battery and connecting, such as a BP-
90A contained in a DC-210 Battery Adaptor to the DC IN 12V connector of the
camcorder as an external source.
Using a BP-L40 (A)/L60A/L90A battery pack
With a battery pack, the camcorder will operate continuously for the time shown below.
BP-L40 (A): Approx. 190 minutes
BP-L60A: Approx. 420 minutes
BP-L90A: Approx. 700 minutes
The numbers above indicate the time using only the viewfinder.
Before use, charge the battery pack with the BC-L50/L100 Battery Charger.
Notes on using the battery pack
A warm battery pack may not be fully recharged.
Even when fully charged, battery packs gradually lose their charge naturally. Use the
battery packs as soon as possible after recharging.
To prolong the life of battery packs, store them in a cool place (about 20 °C (68 °F)),
and charge in a place with an ambient temperature between 10 °C and 30 °C (50 °F to
86 °F).
Before long-term storage, discharge the battery fully. This extends the battery life.
It is recommended that the BP-L40 (A) be used at 30 W or less.
When using the BP-L40 (A), the specified capacity may not be obtained if it is
connected to the camcorder with accessories which is operated at 30 W or higher,
especially when the ambient temperature is low.
At low temperatures, the usable time of battery packs decreases. When the ambient
temperature is 0 °C (32 °F), usable time decreases by about 10%. (However, the usable
time is affected by the power consumption of the camcorder in addition to the usage
status of the battery packs.) The usable time of battery packs increases if they are
warmed to the room temperature (about 20 °C (68 °F)) before use at low temperatures.
If you use the BP-L40 (A) at temperatures of 0 °C (32 °F) or below, when power
consumption of the camcorder and accessories is 40 W or higher (due to using a video
light, for example), power may break after a short time (a few minutes). To increase
the usable time, store the BP-L40 (A) in a warm place, and power on the camcorder
before the BP-L40 (A) cools down.
Compared to the BP-L40 (A), the BP-L60A/L90A offer better performance at low
temperatures. The BP-L60A/L90A are recommended for use at low temperatures.
Carrying a spare battery pack is recommended.
The BP-L40 (A)/L60A/L90A is free from memory effect. There is no need to
discharge it fully before recharging.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSR-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSR-250 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info