59863
74
Zoom out
Zoom in
Previous page
1/179
Next page
74
To perform wireless flash shooting
1Attach the external flash to the camera (page 166) and turn on the camera and the external flash.
2Select (Wireless).
3Remove the external flash from the camera and pull up the built-in flash on the camera.
“WL” appears in the viewfinder and on the LCD monitor.
4Determine the position of the camera and the external flash.
5Make sure the built-in flash and the external flash are fully charged.
The built-in flash is fully charged when appears in the viewfinder.
The external flash is fully charged when appears on the back of the external flash and the red lamp
flashes on the front of the flash.
6Press the AEL (AE Lock) button on the camera to test fire the flash.
If the flash does not fire, change the camera, external flash, or subject position.
7Check both flashes again to make sure they are fully charged. Press the shutter button to take a
picture.
Turn off the wireless flash mode after wireless flash shooting. (You can either deactivate the camera and
the external flash separately, or you can attach the external flash to the camera and select a different flash
mode, as shown on page 73). If the built-in flash is used while the wireless flash mode is still active,
inaccurate flash exposures will result.
You can select the wireless setting on the camera and the external flash separately. See page 73 to set the
camera. To set the external flash, refer to the operating instructions supplied with it.
(Rear sync.) Ordinarily, the flash is fired right after the shutter has been
released, then objects illuminated by other light sources are
captured. This causes certain subjects, such as trailing light,
to appear unnatural when the slower shutter speed is used.
In rear sync mode, the objects illuminated by other light
sources are captured first, then the flash is fired. You can
capture a flowing light or the trail of a moving subject in a
more realistic way when shooting a moving subject using a
slower shutter speed with the flash.
(Wireless) Using an external flash (not supplied) mounted on the camera
may make certain pictures appear too flat. In such a case, an
off-camera flash in a proper position can create more contrast,
resulting in a more three-dimensional picture.
This camera can do this shooting without a cable using the
flash light to transmit the signal between the camera and the
flash (Wireless flash shooting).
Wireless flash shooting requires the flash HVL-F56AM or
HVL-F36AM (not supplied).
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSLR-A700M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSLR-A700M in the language / languages: English as an attachment in your email.

The manual is 6.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DSLR-A700M

Sony DSLR-A700M User Manual - German, Dutch - 362 pages

Sony DSLR-A700M User Manual - French, Italian - 355 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info