59523
86
Zoom out
Zoom in
Previous page
1/159
Next page
86
For details on the operation
1
page 80
Recording menu 2
The default settings are marked with .
Reduces the red-eye phenomenon by providing low-flash light a few times before shooting
when using the flash.
Red-Eye reduction is available only with the built-in flash. (When using an external flash (not supplied),
the red-eye phenomenon rarely occurs.)
You can select the flash control mode to set the amount of flash light.
ADI: stands for “Advanced Distance Integration”
P-TTL: stands for “Pre-flash, Through the lens”
When the distance between the subject and the external flash (not supplied) cannot be determined,
(wireless flash shooting using an external flash (not supplied), shooting with an off-camera flash using a
cable, shooting with a macro twin flash or ring light, etc.) the camera automatically selects Pre-flash TTL
mode.
Select [Pre-flash TTL] in the following cases, as the camera cannot obtain accurate distance information
with ADI flash.
A wide panel is attached to the HVL-F36AM flash.
A diffuser is attached to the surface of the flash.
A filter with an exposure factor, such as an ND filter, is used.
A close-up lens is used.
ADI flash is only available in combination with the lens that is provided with a distance encoder. To
determine the lens is equipped with a distance encoder, refer to the operating instructions supplied with
the lens.
When the mode dial is set to AUTO, P, or Scene Selection, the flash mode is set to autoflash
(default setting) automatically. When the flash is pulled up, if you want to make sure the flash
fires without fail, you can set it to Fill-flash. In either case, you can change the flash mode
with the function dial and the Fn button.
Red eye
On Reduces the red-eye phenomenon.
Off Does not use Red-Eye Reduction.
Flash control
ADI flash A pre-flash is fired right before shooting, and the camera sets
the amount of flash light by measuring the amount of
reflected light from the pre-flash and the associated distance
information.
Pre-flash TTL A pre-flash is fired right before shooting, and the camera sets
the amount of flash light by measuring only the amount of
reflected light from the pre-flash. The distance information is
not used in the calculation.
Flash default
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSLR-A100W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSLR-A100W in the language / languages: English as an attachment in your email.

The manual is 13.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DSLR-A100W

Sony DSLR-A100W User Manual - English - 19 pages

Sony DSLR-A100W User Manual - German - 319 pages

Sony DSLR-A100W User Manual - German - 39 pages

Sony DSLR-A100W User Manual - Dutch - 319 pages

Sony DSLR-A100W User Manual - Dutch - 39 pages

Sony DSLR-A100W User Manual - French, Italian - 319 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info