Hilfe
Digitale Fotokamera
DSC-RX10M4
Fotoprofil
Ermöglicht eine Änderung der Einstellungen für Farbe, Abstufung usw.
Anpassen des Bildprofils
Sie können die Bildqualität anpassen, indem Sie solche Bildprofilposten wie [Gamma] und [Details] einstellen. Schließen
Sie die Kamera zur Einstellung dieser Parameter an ein Fernsehgerät oder einen Monitor an, und nehmen Sie die
Einstellungen vor, während Sie das Bild auf dem Bildschirm beobachten.
Verwendung der Voreinstellung des Bildprofils
Die Standardeinstellungen [PP1] bis [PP9] für Filme sind auf der Basis verschiedener Aufnahmebedingungen in der
Kamera vorprogrammiert worden.
MENU →
(Kamera- einstlg.1) → [Fotoprofil] → gewünschte Einstellung.
PP1:
Beispiel-Einstellung unter Verwendung von [Movie] Gamma
PP2:
Beispiel-Einstellung unter Verwendung von [Still] Gamma
PP3:
Beispiel-Einstellung eines natürlichen Farbtons unter Verwendung von [ITU709] Gamma
PP4:
Beispiel-Einstellung eines Farbtons, der dem Standard ITU709 getreu ist
PP5:
Beispiel-Einstellung unter Verwendung von [Cine1] Gamma
PP6:
Beispiel-Einstellung unter Verwendung von [Cine2] Gamma
PP7:
Beispiel-Einstellung unter Verwendung von [S-Log2] Gamma
PP8:
Beispieleinstellung mit [S-Log3] Gamma und [S-Gamut3.Cine] unter [Farbmodus].
PP9:
Beispieleinstellung mit [S-Log3] Gamma und [S-Gamut3] unter [Farbmodus].
Posten des Bildprofils
Schwarzpegel
Damit wird der Schwarzwert eingestellt. (–15 bis +15)
MENU →
(Kamera- einstlg.1) → [Fotoprofil] → zu änderndes Profil.
1
Rufen Sie die Index-Ansicht des jeweiligen Postens auf, indem Sie die rechte Seite des Einstellrads
drücken.
2
Wählen Sie den zu ändern Posten durch Drücken der oberen/unteren Seite des Einstellrads aus.
3
Wählen Sie den gewünschten Wert aus, indem Sie die obere/untere Seite des Einstellrads und dann die
Mitte drücken.
4