54350
71
Zoom out
Zoom in
Previous page
1/232
Next page
71
Advanced Recording Operations Uitgebreide opnamefuncties
You can insert a scene in the middle of a
recorded tape by setting the start and end points.
The previously recorded frames between these
start and end points will be erased. Use the
Remote Commander for this operation.
(1)While your camcorder is in the standby mode,
keep pressing EDITSEARCH, and release the
button at the insert end point [b].
(2)Press ZERO SET MEMORY. The ZERO SET
MEMORY indicator flashes and the counter
resets to zero.
(3)Keep pressing the 7 side of EDITSEARCH
and release the button at the insert start point
[a].
(4)Press START/STOP to start recording. The
scene is inserted. Recording stops
automatically near the counter zero point.
Your camcorder returns to the standby mode.
Notes
The zero set memory function works only for
tapes recorded in the Digital8 system.
The picture and the sound may be distorted at
the end of the inserted section when it is played
back.
If a tape has a blank portion in the recorded
portions
The zero set memory function may not work
correctly.
In een videocassette die reeds opnamen bevat
kunt u een nieuwe opname inlassen door het
inlas-beginpunt en inlas-eindpunt te bepalen.
De bestaande opnamen ertussen zullen bij het
inlassen worden gewist. Gebruik voor deze
functie de afstandsbediening.
(1)Zet de camcorder in de opnamepauzestand en
houd dan de EDITSEARCH toets ingedrukt
tot u het punt bereikt waar de ingelaste
opname moet eindigen, en laat de toets los bij
dat inlas-eindpunt [b].
(2)Druk op de ZERO SET MEMORY toets. De
ZERO SET MEMORY aanduiding gaat
knipperen en de bandteller wordt op nul
teruggezet.
(3)Blijf nu de 7 min-kant van de
EDITSEARCH toets ingedrukt houden tot u in
de terugwaarts weergegeven beelden het punt
bereikt waar de ingelaste opname moet
beginnen, en laat de toets los bij dat inlas-
beginpunt [a].
(4)Druk op de START/STOP toets wanneer u
wilt beginnen met opnemen. Het inlassen van
de nieuwe opname begint, om automatisch te
stoppen wanneer de bandteller het nulpunt
bereikt. De camcorder komt dan weer in de
opnamepauzestand.
Opmerkingen
De nulpuntgeheugen-terugkeerfunctie werkt
alleen voor videocassettes die zijn opgenomen
met het Digital8 systeem.
De kans bestaat dat er in de laatste beelden van
het ingevoegde gedeelte bij weergave wat
vervorming in beeld en geluid is.
Als er tussen de opnamen op de band een
blanco gedeelte is
Dan kan de nulpuntgeheugen-terugkeerfunctie
niet altijd goed werken.
Inserting a scene
[a]
[b]
EDITSEARCH
ZERO SET
MEMORY
Inlassen van nieuwe
beelden
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV725E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV725E in the language / languages: English, Dutch as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info