35544
120
Zoom out
Zoom in
Previous page
1/132
Next page
120
Precautions
Camcorder operation
Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).
For DC or AC operation, use the accessories recommended in this operating
instructions.
If any solid object or liquid get inside the casing, unplug your camcorder and have it
checked by a Sony dealer before operating it any further.
Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Keep the POWER switch set to OFF (CHARGE) when you are not using your
camcorder.
Do not wrap your camcorder with a towel, for example, and operate it. Doing so
might cause heat to build up inside.
Keep your camcorder away from strong magnetic fields or mechanical vibration.
Noise may appear on the image.
Do not touch the LCD screen with your fingers or a sharp-pointed object.
If your camcorder is used in a cold place, a residual image may appear on the LCD
screen or in the viewfinder. This is not a malfunction.
While using your camcorder, the back of the LCD screen may heat up. This is not a
malfunction.
On handling tapes
Do not insert anything into the small holes on the rear of the cassette. These holes are
used to sense the type and thickness of the tape and if the recording tab is in or out.
Camcorder care
Remove the tape, and periodically turn on the power, operate the CAMERA and VTR
sections and play back a tape for about 3 minutes when your camcorder is not to be
used for a long time.
Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,
remove them with a soft cloth.
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of solvent which may damage the
finish.
Do not let sand get into your camcorder. When you use your camcorder on a sandy
beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause
your camcorder to malfunction, and sometimes this malfunction cannot be repaired.
Connection to your PC
When recording with i.LINK cable the image processed or edited by your PC, use a
new Hi8 /Digital8 tape.
When inputting the image recorded by Hi8/standard8 (analog) system into your PC,
dub the image into a Digital8 or DV tape first, and then input it into your PC.
When inputting the image recorded by Hi8/standard 8 system into Sony VAIO
The Program Capture function of DVgate motion doesn’t work. To use this function,
dub the image into a Digital8 or DV tape first, and then input it into your Sony VAIO.
Maintenance information and precautions
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV320 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-TRV320

Sony DCR-TRV320 User Manual - Dutch, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info