469406
210
Zoom out
Zoom in
Previous page
1/304
Next page
210
Het USB stuurprogramma
installeren
Maak de volgende instellingen vóórdat u
de USB kabel aansluit op uw computer.
Sluit daarna de USB kabel aan volgens de
beschrijving onder Zorgen dat uw
computer de camcorder herkent.
Bij gebruik van Windows 2000 Professional of
Windows XP Home Edition/Professional dient u
zich aan te melden met de privileges van
beheerder.
(1)Schakel uw computer in zodat Windows
gestart wordt.
(2)Plaats de bijgeleverde CD-ROM in het CD-
ROM station van uw personal computer.
Het openingsscherm van het
toepassingsprogramma verschijnt.
(3)Plaats de cursor op de regel USB Driver en
klik daarop. Dan start de installatie van het
USB stuurprogramma.
(4)Volg de aanwijzingen die op uw scherm
verschijnen om het USB stuurprogramma te
installeren.
(5)Verwijder de CD-ROM en start de computer
opnieuw, volgens de aanwijzingen op het
scherm.
Opmerking
Als u de USB kabel aansluit voordat de installatie
van het USB stuurprogramma voltooid is, zal het
USB stuurprogramma niet juist geregistreerd
worden. Dan zult u het USB stuurprogramma
opnieuw moeten installeren volgens de
aanwijzingen op blz. 214.
Gebruikers van Windows XP Home Edition/
Professional
Als u het menu-onderdeel USBCONNECT
kiest en dan instelt op PTP, kunt u de beelden
van een Memory Stick via de camcorder
overbrengen naar uw computer zonder dat u het
USB stuurprogramma hoeft te installeren. Dit is
ideaal voor het simpelweg overnemen van
beelden van uw camcorder op uw computer. Zie
voor nadere bijzonderheden blz. 250.
De camcorder op uw computer
aansluiten met de USB kabel
voor Windows gebruikers
Installing the USB driver
Start the following operation without
connecting the USB cable to your
computer.
Connect the USB cable according to
Making the computer recognise the
camcorder.
If you are using Windows 2000 Professional or
Windows XP Home Edition/Professional, log in
with permission of Administrators.
(1)Turn on your computer and allow Windows
to load.
(2)Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software starts up and the title screen appears.
(3)Move the cursor to USB Driver and click.
This starts USB driver installation.
(4)Follow the on-screen messages to install the
USB driver.
(5)Remove the CD-ROM and then restart the
computer, in accordance with the instructions
on the screen.
Note
If you connect the USB cable before USB driver
installation is complete, the USB driver will not
be properly registered. Carry out installation
again in accordance with the steps on page 214.
Windows XP Home Edition/Professional users
If you go to USBCONNECT in the menu settings
and select PTP, you can copy Memory Stick
images from the camcorder onto your computer
without installing the USB driver. This is ideal
for simply copying images from a camcorder
onto a computer. Refer to page 241 for details.
Connecting your camcorder to
your computer using the USB
cable For Windows users
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV25E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV25E in the language / languages: English, Dutch as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info