469405
117
Zoom out
Zoom in
Previous page
1/304
Next page
117
Editing Videomontage
Erasing all programmes
(1)Select VIDEO EDIT in the menu settings.
(2)Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial (except DCR-
TRV16E/TRV116E).
(3)Select ERASE ALL in the menu settings. Turn
the SEL/PUSH EXEC dial to select EXECUTE,
then press the dial.
All the programme marks flash, then the
settings are cancelled.
To cancel erasing all programmes
Select RETURN in step 3.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the
tape is ejected.
Note
You cannot operate recording during Digital
program editing.
On a blank portion of the tape
You cannot set IN or OUT on blank portions of
the tape.
If there is a blank portion between IN and
OUT on the tape
The total time code may not be displayed
correctly.
Operation 2: Performing the
programme
(Dubbing a tape)
Make sure your camcorder and VCR are
connected, and that the VCR is set to recording
pause. (When you use the i.LINK cable (DV
connecting cable) this procedure is not
necessary.)
When you use a digital video camera recorder,
set its power switch to VCR/VTR.
(1)Select VIDEO EDIT in the menu settings. Turn
the SEL/PUSH EXEC dial to select TAPE,
then press the dial (except DCR-TRV16E/
TRV116E).
Dubbing only desired scenes
Digital program editing (on
tapes)
Annuleren van alle gemarkeerde
scènes
(1)Kies het onderdeel VIDEO EDIT in het
instelmenu.
(2)Draai dan aan de SEL/PUSH EXEC regelknop
om in te stellen op TAPE en druk de
regelknop in (niet voor de DCR-TRV16E/
TRV116E).
(3)Kies het onderdeel ERASE ALL in het
instelmenu. Draai aan de SEL/PUSH EXEC
regelknop, stel in op EXECUTE en druk de
regelknop in.
Alle scènemarkeringen gaan eerst knipperen
op het scherm en daarna worden alle
markeringen gewist.
Bij nader inzien niet alle markeringen
annuleren
Kies in stap 3 geen EXECUTE, maar RETURN.
Afsluiten van het markeren van scènes
Druk op de MENU toets.
Het samengestelde programma van de over te
nemen scènes blijft in het geheugen bewaard
totdat u de cassette verwijdert.
Opmerking
U kunt tijdens de digitale programmamontage
niet ondertussen met de camcorder gaan
opnemen.
Bij een blanco gedeelte van de band
U kunt geen CUT-IN startpunt of CUT-OUT
eindpunt afbakenen bij een onbespeeld gedeelte
van de band.
Als er een blanco passage is tussen het CUT-IN
startpunt en het CUT-OUT eindpunt
Dan kan de totale tijdcode niet juist worden
aangegeven.
Procedure 2: Een programma op
digitale wijze
overnemen
(digitaal kopiëren)
Zorg dat uw camcorder en de videorecorder
goed zijn aangeslotzen en dat de videorecorder
in de opnamepauzestand staat. (Bij aansluiting
met een i.LINK kabel (DV-aansluitsnoer) is deze
procedure niet nodig.)
Als u kopieert naar een andere digitale
videocamera/recorder, zet dan de functiekeuze-
schakelaar daarvan in de VCR/VTR stand.
(1)Kies het onderdeel VIDEO EDIT in het
instelmenu. Draai dan aan de SEL/PUSH
EXEC regelknop om in te stellen op TAPE
en druk de regelknop in (niet voor de DCR-
TRV16E/TRV116E).
Geselecteerde bandopnamen
kopiëren Digitale
programmamontage (op videoband)
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV24E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV24E in the language / languages: English, Dutch as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info