469405
100
Zoom out
Zoom in
Previous page
1/304
Next page
100
Videomontage
Video-opnamen
overkopiëren
Using the A/V connecting cable
You can dub or edit on the VCR connected to
your camcorder using your camcorder as a
player. Connect your camcorder to the VCR
using the A/V connecting cable supplied with
your camcorder.
Before operation
Set DISPLAY in to LCD in the menu
settings. (The defalt setting is LCD.)
Press the following buttons to make the
indicator disappear so that they will not be
superimposed on the edited tape:
DISPLAY
DATA CODE on the Remote Commander
SEARCH MODE on the Remote Commander
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Prepare the VCR for recording, then set the
input selector to LINE.
Connect the A/V connecting cable to the
AUDIO/VIDEO OUT or AUDIO/VIDEO
jack.
Refer to the operating instructions of the VCR.
(3)Set the POWER switch to PLAYER*
1)
/VCR*
2)
on your camcorder.
(4)Play back the recorded tape on your
camcorder.
(5)Start recording on the VCR. Refer to the
operating instructions of your VCR.
*
1)
DCR-TRV16E/TRV18E/TRV24E only
*
2)
DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
Editing
Dubbing a tape
VIDEO
AUDIO
IN
AUDIO/VIDEO
S VIDEO
S VIDEO
: Signal flow/Signaalstroom
VCR/
Videorecorder
Yellow/
Geel
White/
Wit
Red/
Rood
A/V connecting cable (supplied)/
Audio/video-aansluitsnoer (bijgeleverd)
Met het audio/video-
aansluitsnoer
Met een andere videorecorder, die u aansluit op uw
camcorder, kunt u video-opnamen vanaf de
camcorder overkopiëren en desgewenst monteren
op de andere videorecorder.
De videorecorder kunt u voor het opnemen
aansluiten op uw camcorder met het bij de
camcorder geleverde audio/video-aansluitsnoer.
Alvorens te gaan kopiëren
Zet het menu-onderdeel DISPLAY onder in
het instelmenu op LCD. (De oorspronkelijke
instelling is LCD.)
Druk op de volgende toetsen om de opname-
aanduidingen van het scherm te verwijderen en te
voorkomen dat de aanduidingen zichtbaar blijven
in de beelden op de gekopieerde videoband:
DISPLAY toets
DATA CODE toets van de afstandsbediening
SEARCH MODE toets van de afstandsbediening
(1) Plaats een nieuwe (of een voor opnemen
geschikte) videocassette in de videorecorder die
u voor opnemen gebruikt en plaats uw
opgenomen cassette in de camcorder.
(2) Breng uw videorecorder in gereedheid voor
opnemen en zet de ingangskeuzeschakelaar
ervan in de LINE stand. Zie voor nadere
bijzonderheden de gebruiksaanwijzing van uw
videorecorder.
Sluit het audio/video-aansluitsnoer aan op de
AUDIO/VIDEO OUT uitgang of de AUDIO/
VIDEO aansluiting.
Zie voor nadere bijzonderheden de
gebruiksaanwijzing van uw videorecorder.
(3) Zet de POWER schakelaar van de camcorder in
de PLAYER*
1)
/VCR*
2)
stand.
(4) Start het afspelen van de cassette met opnamen
op uw camcorder.
(5) Start de opname op de aangesloten video-
recorder. Zie voor nadere bijzonderheden de
gebruiksaanwijzing van uw videorecorder.
*
1)
alleen voor de DCR-TRV16E/TRV18E/TRV24E
*
2)
alleen voor de DCR-TRV25E/TRV27E/TRV116E/
TRV118E
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV24E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV24E in the language / languages: English, Dutch as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info