511461
59
Zoom out
Zoom in
Previous page
1/288
Next page
59
Advanced Recording Operations Uitgebreide opnamefuncties
(1)Voor in-faden [a]
Zet de camcorder in de opnamepauzestand en
druk op de FADER toets tot de aanduiding
voor de gewenste fader-functie gaat
knipperen.
Voor uit-faden [b]
Druk tijdens opnemen op de FADER toets tot
de gewenste fader-indicator gaat knipperen.
Bij indrukken verspringt de fader-indicator
als volgt:
FADER t M.FADER (mozaïek) t
BOUNCE (stuiteren) t MONOTONE
(zwart/wit) t OVERLAP (overvloeien) t
WIPE (gordijn-open) t DOT (stippen) t
geen aanduiding
De laatst gekozen fader-functie wordt altijd
als eerste weer aangegeven.
(2)Druk op de START/STOP toets. De fader-
indicator stopt met knipperen.
Na afloop van het in/uit-faden keert uw
camcorder automatisch terug naar de normale
werking.
Uitschakelen van de in/uit-fader
functie
Voor het indrukken van de START/STOP toets
drukt u eerst enkele malen op de FADER toets
totdat de fader-indicator dooft.
Opmerkingen
De OVERLAP, WIPE en DOT in-fade functies
werken alleen voor videocassettes die zijn
opgenomen met het Digital8 systeem.
Tijdens het in- en uit-faden kunt u de volgende
functies niet gebruiken. Andersom kunt u
tijdens gebruik van de onderstaande functies
ook niet het beeld in of uit laten faden:
Digitale opname-effecten
Colour Slow Shutter kleurverbetering
De Super NightShot nachtopnamefunctie
De foto-opnamefuncties
Interval-opname
Beeld-voor-beeld opname
(1)When fading in [a]
In the standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
FADER t M.FADER t BOUNCE t
MONOTONE t OVERLAP t WIPE
DOT t no indicator
The last selected fader mode is indicated first
of all.
(2)Press START/STOP. The fader indicator stops
flashing.
After fade in/out ends, your camcorder
automatically returns to the normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER
repeatedly until the indicator disappears.
Notes
The overlap, wipe and dot functions work only
for tapes recorded in the Digital8 system.
You cannot use the following functions while
using the fader function. Also, you cannot use
the fader function while using the following
functions:
Digital effects
Colour Slow Shutter
Super NightShot
Photo recording
Interval recording
Frame recording
Using the fader function
1
FADER
FADER
Beelden in- en uit-faden
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV241 in the language / languages: English, Dutch as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info