490838
129
Zoom out
Zoom in
Previous page
1/304
Next page
129
Editing Videomontage
Geluidsopnamen inlassen
Monitoring the new recorded
sound
(1)Play back the tape on which you added audio.
(2)Press MENU, then select AUDIO MIX in
*
1)
/ *
2)
with the SEL/PUSH EXEC dial
(p. 236).
(3)Turn the SEL/PUSH EXEC dial to adjust the
balance between the original sound (ST1) and
the new sound (ST2), then press the dial.
Five minutes after you disconnect the power
supply or remove the battery pack, the
AUDIO MIX setting returns to original sound
(ST1) only. The default setting is original
sound only.
Notes
New audio cannot be recorded on a tape
already recorded in the 16-bit mode (32 kHz,
44.1 kHz or 48 kHz).
New audio cannot be recorded on a tape
already recorded in the LP mode.
You cannot add audio with the AUDIO/
VIDEO OUT jack.*
1)
You cannot add audio with the DV OUT*
1)
or
DV IN/OUT*
2)
jack.
You cannot add audio on the blank portion of
the tape.
If an i.LINK cable (DV connecting cable)
(optional) is connected to your camcorder
You cannot add audio to a recorded tape.
We recommend that you add audio on a tape
recorded with your camcorder
If you add audio on a tape recorded with another
camcorder, the sound quality may become
worse.
If you set the write-protect tab of the cassette
to lock
You cannot record on a tape. Slide the write-
protect tab to release the write protection.
*
1)
DCR-TRV16E/TRV18E/TRV24E only
*
2)
DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
Audio dubbing
VCR SET
HiFi SOUND
AUDIO MIX
A / V DV OUT
NTSC PB
RETURN
[
MENU
] :
END
ST1 ST2
Controleren van het nieuw
opgenomen geluid
(1) Start de weergave van de cassette waarop het
nieuwe geluidsspoor hebt ingelast.
(2) Druk op de MENU toets en kies dan het menu-
onderdeel AUDIO MIX onder
*
1)
/ *
2)
met
de SEL/PUSH EXEC regelknop. (zie blz. 245).
(3) Draai aan de SEL/PUSH EXEC regelknop om
de geluidsbalans van de oorspronkelijke
geluidsopnamen (spoor ST1) en het nieuw
ingelaste geluid (spoor ST2) naar wens in te
stellen en druk dan de regelknop in.
Vijf minuten nadat u het batterijpak verwijdert
of de stroomvoorziening onderbreekt, keert de
AUDIO MIX instelling terug naar weergave
van het oorspronkelijke geluidsspoor (ST1). De
fabrieksinstelling is voor weergave van alleen
het oorspronkelijk opgenomen geluid.
Opmerkingen
U kunt geen nieuw geluidsspoor inlassen op een
videocassette waarop het geluid is opge-nomen
in de 16BIT stand (met 32 kHz, 44,1 kHz of 48
kHz bemonstering).
U kunt geen nieuw geluidsspoor inlassen op een
videoband die is opgenomen met de LP
langspeelsnelheid.
Het is niet mogelijk geluid in te lassen via de
AUDIO/VIDEO OUT aansluiting.
*1)
U kunt geen geluid inlassen via de DV OUT
*1)
of IN/OUT
*2)
aansluiting.
U kunt geen geluid inlassen bij een onbespeeld
gedeelte van de videoband.
Als er een i.LINK kabel (DV-aansluitsnoer) (los
verkrijgbaar) is aangesloten op uw camcorder
Dan kunt u geen nieuw geluid toevoegen aan een
eerder opgenomen videoband.
Het inlassen van nieuw geluid werkt het beste
voor video-opnamen die met deze camcorder
zijn gemaakt
Inlassen van nieuwe geluidsopnamen op een
videocassette die is opgenomen op een andere
camcorder kan resulteren in een minder goede
geluidskwaliteit.
Als het wispreventienokje van de video-
cassette in de beveiligde stand is gezet
Dan kunt u op deze cassette niet opnemen. Schuif
voor het opnemen eerst het wispreventienokje
terug in de vrije stand.
*
1)
alleen voor de DCR-TRV16E/TRV18E/TRV24E
*
2)
alleen voor de DCR-TRV25E/TRV27E/
TRV116E/TRV118E
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV24 in the language / languages: English, Dutch as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info