490838
113
Zoom out
Zoom in
Previous page
1/304
Next page
113
Editing Videomontage
Dubbing only desired scenes
Digital program editing (on
tapes)
Step 3: Adjusting the
synchronization of the
VCR
You can adjust the synchronization of your
camcorder and the VCR. Have a pen and paper
ready for notes. Before operation, eject a cassette
from your camcorder.
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, then set to
recording pause.
When you select i.LINK in CONTROL, you
do not need to set to recording pause.
(2)Turn the SEL/PUSH EXEC dial to select ADJ
TEST, then press the dial.
(3)Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
IN and OUT are recorded on an image for five
times each to calculate the number values for
adjusting the synchronization.
The EXECUTING indicator flashes on the
screen.
When finished, the indicator changes to
COMPLETE.
(4)Rewind the tape in the VCR, then start slow
playback.
Take a note of the first number value of each
IN and the closing number value of each
OUT.
(5)Calculate the average of all the first number
values of each IN, and the average of all the
last number values of each OUT.
(6)Turn the SEL/PUSH EXEC dial to select
CUT-IN, then press the dial.
(7)Turn the SEL/PUSH EXEC dial to select the
average number value of IN, then press the
dial.
The calculated start position for recording is
set.
(8)Turn the SEL/PUSH EXEC dial to select
CUT-OUT, then press the dial.
Geselecteerde bandopnamen
kopiëren Digitale
programmamontage (op videoband)
Stap 3: Zorgen dat uw
camcorder en de
videorecorder
synchroon lopen
Volgens de onderstaande aanwijzingen kunt u
zorgen dat uw camcorder en de videorecorder
synchroon lopen. Houd een pen en papier bij de
hand voor notities. Alvorens deze instelling te
maken, verwijdert u de cassette uit uw
camcorder.
(1)Plaats een voor opnemen geschikte cassette in
de videorecorder en zet de videorecorder in
de opnamepauzestand.
Als u bij CONTROL hebt ingesteld op i.LINK,
is het instellen van de opnamepauzestand niet
nodig.
(2)Stel met een draai aan de SEL/PUSH EXEC
regelknop in op ADJ TEST en druk de
regelknop in.
(3)Stel met een draai aan de SEL/PUSH EXEC
regelknop in op EXECUTE en druk de
regelknop in.
Er wordt nu vijfmaal een opname gestart (IN)
en gestopt (OUT), om precies de numerieke
waarde te berekenen voor het synchroniseren
van de camcorder en de videorecorder.
De aanduiding EXECUTING knippert op
het scherm.
Na afloop van de proefopnamen verandert de
aanduiding in COMPLETE.
(4)Spoel de band in de videorecorder terug naar
het beginpunt en start van daar af de
vertraagde weergave.
Noteer telkens de beginwaarde bij elk IN
startpunt en de laatste waarde bij elk OUT
eindpunt.
(5)Bereken het gemiddelde van alle IN
beginwaarden en het gemiddelde van alle
OUT eindwaarden.
(6)Stel met een draai aan de SEL/PUSH EXEC
regelknop in op CUT-IN en druk de
regelknop in.
(7)Kies met een draai aan de SEL/PUSH EXEC
regelknop de berekende gemiddelde waarde
voor IN en druk de regelknop in.
Hiermee is het beginpunt voor de opname
vastgesteld.
(8)Stel met een draai aan de SEL/PUSH EXEC
regelknop in op CUT-OUT en druk de
regelknop in.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV24 in the language / languages: English, Dutch as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info