511450
19
Zoom out
Zoom in
Previous page
1/272
Next page
19
Getting Started Voorbereidingen
Na het opladen van het batterijpak
Maak de netspanningsadapter los van de DC IN
aansluiting van uw camcorder.
Opmerking
Zorg dat er geen metalen voorwerpen tegen de
metalen contactvlakken van de
gelijkstroomstekker van de netspanningsadapter
komen. Dit kan kortsluiting veroorzaken en de
netspanningsadapter beschadigen.
Wanneer het batterijpak volledig is opgeladen
Dan dooft de achtergrondverlichting van het
LCD uitleesvenster.
Resterende batterij-gebruiksduur aanduiding
De resterende batterijtijd-aanduiding in het
uitleesvenster toont de nog resterende
gebruiksduur bij benadering voor het opnemen
met de beeldzoeker.
Totdat uw camcorder de resterende batterij-
gebruiksduur heeft berekend
Voorlopig verschijnt er eerst “– min in het
uitleesvenster.
Tijdens het opladen van het batterijpak
Soms kan er geen aanduiding verschijnen of kan
de spanningsindicator in het uitleesvenster gaan
knipperen, in de volgende gevallen:
als het batterijpak niet goed vast zit.
als er iets mis is met het batterijpak.
Als de camcorder wordt uitgeschakeld, terwijl
de batterijspanningsindicator aangaf dat het
batterijpak nog voldoende stroom kon
leveren
Laad het batterijpak opnieuw volledig op, dan
zal de batterijspanningsindicator weer de juiste
gebruiksduur tonen.
Bij gebruik van de netspanningsadapter
Plaats de netspanningsadapter in de buurt van
een goed bereikbaar stopcontact. Mocht er tijdens
gebruik van de netspanningsadapter iets mis
gaan, trekt u dan zo spoedig mogelijk de stekker
uit het stopcontact.
Stap 1: Voorbereiden van de
stroomvoorziening
After charging the battery pack
Disconnect the AC power adaptor from the DC
IN jack on your camcorder.
Note
Prevent metallic objects from coming into contact
with the metal parts on the DC plug of the AC
power adaptor. This may cause a short-circuit,
damaging the AC power adaptor.
When the battery pack is charged fully
The LCD backlight of the display window is
turned off.
Remaining battery time indicator
The remaining battery time indicator in the
display window roughly indicates the recording
time when recording using the viewfinder.
Until your camcorder calculates the actual
remaining battery time
“– min appears in the display window.
While charging the battery pack
No indicator appears or the indicator flashes in
the display window in the following cases:
The battery pack is not installed correctly.
Something is wrong with the battery pack.
If the power may go off although the
remaining battery time indicator indicates
that the battery pack has enough power to
operate
Charge the battery pack fully again so that the
indication on the remaining battery time
indicator is correct.
When you use the AC power adaptor
Place the AC power adaptor near a wall socket. If
any trouble occurs with this unit, disconnect the
plug from the wall socket as soon as possible to
cut off the power.
Step 1 Preparing the power
supply
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-TRV239E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-TRV239E in the language / languages: English, Dutch as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info