107454
102
Zoom out
Zoom in
Previous page
1/131
Next page
3-093-316-13(1)
Digital Video Camera Recorder
Handycam Handbook
DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/
SR82E/SR190E/SR200E/
SR290E/SR300E
© 2007 Sony Corporation
Enjoying your
camcorder
8
Getting Started
12
Recording/
Playback
20
Editing
38
Customizing your
camcorder
52
Performing with
a computer
73
Troubleshooting
94
Additional Information
108
Utilizing recording
media
49
Quick Reference
118
2
Read this before operating your camcorder
Before operating the unit, please read this
Handbook thoroughly, and retain it for
future reference.
Your camcorder is supplied with two
kinds of operations guides.
For operating and handling the camcorder,
refer to “Operating Guide” and “Handycam
Handbook” (PDF/this Handbook).
Types of “Memory Stick” you can use
in your camcorder
You can use “Memory Stick Duo” marked
with or
(p. 111).
“Memory Stick Duo”
(This size can be used with your
camcorder.)
“Memory Stick
(You cannot use it in your camcorder.)
• You cannot use any type of memory card
except “Memory Stick Duo.”
“Memory Stick PRO” and “Memory Stick
PRO Duo” can be used only with
“Memory Stick PRO” compatible
equipment.
• Do not attach a label or the like on a
“Memory Stick Duo” or a Memory Stick
Duo Adaptor.
When using a “Memory Stick Duo”
with “Memory Stick” compatible
equipment
Be sure to insert the “Memory Stick Duo”
into the Memory Stick Duo Adaptor.
Memory Stick Duo Adaptor
On using the camcorder
Do not hold the camcorder by the
following parts.
The camcorder is not dustproofed,
dripproofed or waterproofed. See “About
handling of your camcorder” (p. 114).
To prevent the hard disk from being
broken or recorded images from being
lost, do not do the following when either
of the respective lamps of the POWER
switch (p. 17) or the access lamp (p. 23,
27) is on:
to remove the battery pack or AC
Adaptor from the camcorder.
– to apply mechanical shock or vibration to
the camcorder.
Before connecting your camcorder to
another device with a USB cable etc., be
sure to insert the connector plug in the
proper direction. If you insert the
connector plug forcibly in the wrong
direction, the terminal may be damaged,
or this may cause a malfunction of your
camcorder.
Disconnect the AC Adaptor from the
Handycam Station holding both the
camcorder and the DC plug.
Be sure to turn the POWER switch to
OFF (CHG), when you set the camcorder
onto the Handycam Station or remove the
camcorder from it.
Notes on use
LCD screen Battery
3
About menu items, LCD panel and lens
A menu item that is grayed out is not
available under the current recording or
playback conditions.
The LCD screen is manufactured using
extremely high-precision technology, so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright
points (white, red, blue, or green in color)
that appear constantly on the LCD screen.
These points are normal results of the
manufacturing process and do not affect
the recording in any way.
Exposing the LCD screen or the lens to
direct sunlight for long periods of time
may cause malfunctions.
Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
On recording
Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder,
recording media, etc.
TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
You cannot play back both movies and
still images other than the images
recorded with your camcorder. You also
cannot play back images recorded with
other DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E.
About language setting
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 18).
About this Handbook
The LCD screens and indicators shown in
this Handbook were taken with a digital
still camera, and may look different from
what you actually see.
Design and specifications of recording
media and other accessories are subject to
change without notice.
Unless otherwise specially indicated,
illustrations in this Handbook are based
on DCR-SR300E.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
Also, the lens for DCR-SR190E/SR200E/
SR290E/SR300E is T -coated to suppress
unwanted reflections, then faithfully
reproduce colors.
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Black point
White, red, blue or
green point
4
Notes on using the Hard Disk Drive Handycam
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external
media. It is recommended that you save the
image data on a disc such as DVD-R using your
computer (p. 77). Also, you can save your
image data using a VCR, or a DVD/HDD
recorder (p. 45).
It is recommended that you save your image
data periodically, after recording.
Do not apply shock or vibration to your
camcorder
The hard disk of the camcorder may not be
recognized, or recording or playback may not be
possible.
Especially, during recording/playback, do not
apply shock. After recording, do not apply
vibration or shock to the camcorder, while the
ACCESS lamp is lit.
When using the shoulder belt (not supplied), do
not crash the camera against an object.
On the drop sensor
To protect the internal hard disk from the shock
by dropping, the camcorder has the drop sensor
function (p. 64). When a drop occurs, or under a
non-gravity condition, the block noise to protect
the camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Notes on battery pack/AC Adaptor
While the ACCESS lamp is lit, be sure to avoid
the following. They may cause malfunctions.
Removing the battery pack
Removing the AC Adaptor (while charging
the battery pack using the AC Adaptor)
Be sure to remove the battery pack or the AC
Adaptor after turning off the POWER switch.
Note on operating temperatures
When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
(p. 104).
When the camcorder is connected to a
computer
Do not try to format the hard disk of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
Note on using the camcorder at high
altitudes
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 3,000
meters (9,800 feet). Doing so may damage the
hard disk drive of your camcorder.
Note on disposal/transfer
If you perform [ FORMAT] (p.49) or
formatting the hard disk of the camcorder, you
may not delete data from the hard disk
completely. When you transfer the camcorder, it
is recommended that you perform
[ EMPTY] (p.51) to prevent the recovery of
your data.
In addition to the above, when you dispose of
the camcorder, it is recommended that you
destroy the actual body of the camcorder.
If you cannot record/play back
images, perform [ FORMAT]
If you repeat recording/deleting images for a
long time, fragmentation of data occurs on the
hard disk. Images cannot be saved or recorded.
In such a case, save your images on some type
of external media first (p. 37), and then perform
[ FORMAT] (p. 49).
Fragmentation 1 Glossary (p. 127)
5
Table of Contents
Read this before operating your
camcorder .......................................2
Notes on using the Hard Disk Drive
Handycam ......................................4
Subject examples and solutions .....7
Operation flow ................................8
HOME” and OPTION”
- Taking advantage of two types of
menus .............................................9
Step 1: Checking supplied
items ...................................12
Step 2: Charging the battery
pack ....................................13
Step 3: Turning the power on, and
setting the date and time ....17
Changing the language
setting ....................................... 18
Step 4: Preparing for recording ....19
Recording and playback with ease
(Easy Handycam operation) .........20
Recording .....................................23
Zooming .................................... 25
Recording sound with more
presence (5.1ch surround
recording) (DCR-SR190E/SR200E/
SR290E/SR300E) ...................... 25
Using the flash (DCR-SR190E/
SR200E/SR290E/SR300E) ........ 26
Capturing high quality still images
during movie recording (Dual Rec)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 26
Recording still images on a
“Memory Stick Duo” .................. 27
Recording in dark places
(NightShot plus/NightShot) ....... 27
Adjusting the exposure for backlit
subjects ..................................... 28
Recording in mirror mode ......... 28
Selecting the aspect ratio (16:9 or
4:3) of the recording image ...... 28
Recording the fast action in
slow-motion (SMTH SLW REC)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 29
Playback .......................................31
Using PB zoom ......................... 33
Searching for desired images by
date (Date Index) ...................... 33
Playing back a series of still images
(Slide show) .............................. 34
Playing the image on a TV ............35
Saving images ..............................37
(OTHERS) category .................38
Deleting images ............................38
Dividing a movie ...........................40
Copying still images ......................41
Creating the Playlist ......................42
Dubbing to VCR or DVD/HDD
recorders .......................................45
Printing recorded images (PictBridge
compliant printer) ..........................46
(MANAGE HDD/MEMORY)
category ........................................49
Formatting the hard disk or the
“Memory Stick Duo” ......................49
Checking the hard disk
information ....................................50
Preventing data on the hard disk of
the camcorder from being
recovered ......................................51
Enjoying your camcorder
Getting Started
Recording/Playback
Editing
Utilizing recording media
6
What you can do with the
(SETTINGS) category of the
HOME MENU ............................... 52
Using the HOME MENU ............ 52
List of the (SETTINGS) category
items .......................................... 53
MOVIE SETTINGS ....................... 54
(Items for recording movies)
PHOTO SETTINGS ..................... 57
(Items for recording still images)
VIEW IMAGES SET ..................... 60
(Items to customize the display)
SOUND/DISP SET ....................... 61
(Items to adjust beep and the
screen)
OUTPUT SETTINGS ................... 62
(Items for when connecting other
devices)
CLOCK/ LANG .......................... 63
(Items to set clock and language)
GENERAL SET ............................ 64
(Other setup items)
Activating functions using the
OPTION MENU ....................... 65
Using the OPTION MENU ......... 65
Recording items on the OPTION
MENU ........................................ 66
Viewing items on the OPTION
MENU ........................................ 66
Functions set in
the OPTION MENU ...................... 67
What you can do with Windows
computer ...................................... 73
System requirements ................... 74
Installing the software .................. 75
Creating a DVD with One Touch
...................................................... 77
Importing images to a computer ... 81
Deleting images recorded on the
camcorder through the computer
(DCR-SR42E/SR62E/SR82E/
SR200E/SR300E) ........................ 85
Viewing images imported to a
computer ...................................... 86
Editing the imported images ......... 88
Creating and copying a DVD ........ 90
Manipulating still images .............. 93
Troubleshooting ............................ 94
Warning indicators and
messages ................................... 104
Using your camcorder abroad .... 108
Files on the camcorder hard disk/
folder structure ........................... 110
Maintenance and precautions .... 111
Identifying parts and controls ..... 118
Indicators displayed during
recording/playback ..................... 123
Glossary ..................................... 127
Index ...........................................128
Customizing your camcorder
Performing with a computer
Troubleshooting
Additional Information
Quick Reference
7
Subject examples and solutions
* DCR-SR190E/SR200E/SR290E/SR300E
** DCR-SR32E/SR33E/SR42E/SR52E/SR62E/SR72E/SR82E
Checking your golf
swing
Getting a good
shot of a ski slope
or beach
B SMTH SLW REC* ......................29
B SPORTS** ............................... 69
B Backlight ...................................28
B BEACH.......................................69
B SNOW .......................................69
Capturing still
images during
movie recording
A child on the
stage under a spot
light
B Dual Rec*..................................26 B SPOTLIGHT...............................69
Flowers in close-
up
Fireworks with all
its splendor
B PORTRAIT .................................69
B FOCUS.......................................67
B TELE MACRO.............................67
B FIREWORKS..............................69
B FOCUS.......................................67
Focusing on the
dog on the left
side of the screen
A sleeping child
under dim light
B FOCUS.......................................67
B SPOT FOCUS.............................67
B NightShot plus** ......................27
B NightShot*................................27
B COLOR SLOW SHTR .................70
8
Enjoying your camcorder
Operation flow
B Get ready (p. 12).
B Shoot using your camcorder (p. 23).
Movies are recorded on the hard disk, and still images are
recorded on either the hard disk or a “Memory Stick Duo.”
B Play back the images.
x Viewing on the LCD screen of your camcorder (p. 31)
x Viewing on the TV connected to your camcorder
(p. 35)
B Save recorded images.
x Saving images on a DVD using a computer (p. 77)
x Importing images to a computer (p. 81)
x Dubbing images on VCR or DVD/HDD recorders (p. 45)
B Delete images.
If the hard disk of your camcorder is full, you cannot
record new images. Delete the image data that has been
saved on your camcorder. If you delete the images, you can
record new images on the free hard disk space again.
x Deleting the selected images (p. 38)
x Deleting all the images ([ FORMAT], p. 49)
9
Enjoying your camcorder
Enjoying your camcorder
HOME” and “ OPTION
- Taking advantage of two types of menus
B Categories and items of the HOME MENU
(CAMERA) category
(VIEW IMAGES) category
(OTHERS) category
(MANAGE HDD/MEMORY) category
(SETTINGS) category
To customize your camcorder (p. 52)*.
* You can also set these items during Easy
Handycam operation (p. 20). For the items
available in the (SETTINGS) category, see
page 53.
**DCR-SR190E/SR200E/SR290E/SR300E
HOME MENU” - the starting point for operations with your
camcorder
(HELP)
Displays a description of the item (p. 10)
Category
Item Page
MOVIE* 24
PHOTO* 24
SMTH SLW REC** 29
Item Page
VISUAL INDEX* 31
PLAYLIST 42
Item Page
DELETE* 38
EDIT 40, 41
PLAYLIST EDIT 42
PRINT 46
COMPUTER 73
Item Page
FORMAT* 49
FORMAT* 50
INFO 50
10
1 While pressing the green button
in the center, turn the POWER
switch in the direction of the
arrow to turn on the power.
2 Press (HOME) A (or B).
3 Touch the desired category.
Example: (OTHERS) category
4 Touch the desired item.
Example: [EDIT]
5 Follow the guide on the screen for
further operation.
To hide the HOME MENU screen
Touch .
B When you want to know something
about the function of each item on
the HOME MENU - HELP
1 Press (HOME).
The HOME MENU appears.
2 Touch (HELP).
The bottom of the (HELP) button
turns orange.
Using the HOME MENU
(HOME) A
(HOME) B
11
Enjoying your camcorder
3 Touch the item you want to know
the content.
When you touch an item, its explanation
appears on the screen.
To apply the option, touch [YES],
otherwise, touch [NO].
To deactivate the HELP
Touch (HELP) again in step 2.
Just a touch on the screen during shooting
or playback displays the functions available
at that moment. You will find it easy to
make various settings. See page 65 for
further details.
Using the OPTION MENU
(OPTION)
12
Getting Started
Step 1: Checking supplied items
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p. 13)
Mains lead (1) (p. 13)
Handycam Station (1) (p. 13)
A/V connecting cable (1) (p. 35, 45)
USB cable (1) (p. 46, 78, 81)
Wireless Remote Commander (1) (p. 122)
(except for DCR-SR32E/SR33E/SR42E)
A button-type lithium battery is already installed.
Rechargeable battery pack
NP-FH40 (1) (p. 13, 112) (DCR-SR32E/
SR33E/SR42E/SR52E/SR62E/SR72E/
SR82E)
NP-FH60 (1) (p. 13, 112) (DCR-SR190E/
SR200E/SR290E/SR300E)
21-pin adaptor (p. 36)
For the model with the mark printed on their
bottom surfaces only.
CD-ROM “Handycam Application
Software” (1) (p. 73)
Picture Motion Browser (Software)
Handycam Handbook (This Handbook)
Operating Guide (1)
13
Getting Started
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 112) after
attaching it to your camcorder.
b Notes
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (The default setting).
3 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
4 Connect the mains lead to the AC
Adaptor and the wall socket.
5 Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off when
the battery pack is fully charged.
When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
1
2
3
4
5
5
POWER
switch
DC IN jack
DC plug
AC Adaptor
Mains lead
To the wall socket
CHG
(charge)
lamp
Battery
14
To charge the battery pack using only
the AC Adaptor
Turn the POWER switch to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
b Notes
Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
b Notes
When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/
(Still) lamp (p. 23) is turned off.
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (see page 113 for the
details of storage).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
POWER switch
DC IN jack
CHG (charge)
lamp
DC plug
Battery pack
AC Adaptor
To the wall socket
Open the
jack cover
Mains lead
BATT (battery)
release lever
15
Getting Started
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
* DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
** DCR-SR190E/SR200E/SR290E/SR300E
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
Battery pack Charging time
NP-FH40
(supplied*)
125
NP-FH50 135
NP-FH60
(supplied**)
135
NP-FH70 170
NP-FH100 390
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
105 50
NP-FH50 125 60
NP-FH70 270 135
NP-FH100 615 305
Remaining battery (approx.)
Recording capacity (approx.)
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
90 45
100 50
NP-FH50 105 50
115 55
NP-FH70 230 115
245 120
NP-FH100 525 260
565 280
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 85 40
90 45
NP-FH60
(supplied)
115 55
125 60
NP-FH70 190 95
200 100
NP-FH100 440 220
465 230
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 75 35
80 40
NP-FH60
(supplied)
100 50
105 50
NP-FH70 160 80
170 85
NP-FH100 375 185
395 195
16
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When the LCD backlight turns off
(except for DCR-SR32E/SR33E/SR42E).
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
* When the LCD backlight is on.
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/ (Still) lamp (p. 23).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 14) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (For Battery
Info only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station, even when the mains lead is
disconnected from the wall socket.
When attaching an optional video light, it is
recommended that you use an NP-FH70/FH100
battery pack (except for DCR-SR32E/SR33E/
SR42E).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Battery pack Playback time
NP-FH40
(supplied)
120
NP-FH50 140
NP-FH70 300
NP-FH100 695
Battery pack Playback time*
NP-FH40
(supplied)
110
NP-FH50 130
NP-FH70 280
NP-FH100 635
Battery pack Playback time*
NP-FH50 125
NP-FH60
(supplied)
165
NP-FH70 270
NP-FH100 615
Battery pack Playback time*
NP-FH50 120
NP-FH60
(supplied)
160
NP-FH70 255
NP-FH100 590
17
Getting Started
On the AC Adaptor
Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Step 3: Turning the
power on, and setting
the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
The [CLOCK SET] screen appears.
2 Select the desired geographical
area with v/V, then touch [NEXT].
POWER switch
Lens cover
Touch the button on
the LCD screen.
18
3 Set [SUMMERTIME], then touch
[NEXT].
4 Set [Y] (year) with v/V.
5 Select [M] with b/B, then set the
month with v/V.
6 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
7 Make sure that the clock is
correctly set, then touch .
The clock starts.
You can set any year up to the year
2037.
To turn off the power
Turn the POWER switch to OFF (CHG).
To reset the date and time
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t [CLOCK
SET], and set the date and time.
b Notes
If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 116).
It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
The lens cover opens automatically when the
power is turned on (DCR-SR190E/SR200E/
SR290E/SR300E). It closes when the playback
screen is selected, or the power is turned off.
In the setting at the time of purchase, the power
turns off automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p. 64).
z Tips
The date and time does not appear during
recording, but they are automatically recorded
on the hard disk, and can be displayed during
playback ([DATA CODE], p. 60).
Refer to page 109 for information concerning
“World time difference.”
If the buttons on the touch panel do not work
correctly, adjust the touch panel
(CALIBRATION) (p. 115).
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t
[ LANGUAGE SET], then select the
desired language.
Changing the language setting
19
Getting Started
Step 4: Preparing for recording
Slide the lens cover switch to open.
z Tips
When you finish recording or when you
playback images, close the lens cover.
For DCR-SR190E/SR200E/SR290E/SR300E,
the lens cover opens and closes automatically.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
To turn off the LCD backlight to make
the battery last longer (except for
DCR-SR32E/SR33E/SR42E)
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
image will not be affected by the setting. To
turn on the LCD backlight, press and hold
DISP/BATT INFO for a few seconds until
disappears.
b Notes
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
z Tips
If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
Touch (HOME) t (SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 61), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display
y no display) each time you press DISP/
BATT INFO.
Fasten the grip belt and hold your
camcorder correctly.
Opening the lens cover
manually (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/
SR82E)
Adjusting the LCD panel
Lens cover switch
190 degrees to the
camcorder
2180 degrees
(max.)
290 degrees
(max.)
DISP/BATT INFO
Fastening the grip belt
20
Recording/Playback
Recording and playback with ease
(Easy Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform
recording or playback operation without detailed settings. It also makes screen font size larger
for easy viewing.
1 Turn the POWER
switch G until the
(Movie) lamp lights up.
2 Press EASY A.
3 Press START/STOP H (or E) to
start recording.*
To stop recording, press START/STOP
again.
Still images are recorded on the hard disk in
the default setting. You can change the
recording media of still images to a
“Memory Stick Duo” (p. 27).
1 Turn the POWER
switch G until the
(Still) lamp lights up.
2 Press EASY A .
3
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).**
* The setting of [REC MODE] is fixed to [SP] (p. 54).
** The setting of [ QUALITY] is fixed to [FINE] (p. 58).
Open the lens cover (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/SR82E) (p. 19)
If the POWER switch is set to OFF (CHG),
turn it while pressing the green button.
Recording movies
appears on
the LCD screen.
[STBY] b [REC]
Recording still images
appears on
the LCD screen.
Flashing b Lights up
21
Recording/Playback
1 Turn the POWER switch G to turn on your camcorder.
2 Press (VIEW IMAGES) I (or D) button
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to
display the thumbnails.)
1 :Displays movies.
2 :Displays still images on the hard disk.
3 :Displays still images on a “Memory Stick Duo.”
3 Start playback.
Movies:
Touch the tab and the movie to be played back.
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 60).
Playing back recorded movies/still images
Returns to the
recording screen
Previous 6 images
Next 6 images
Returns to the
recording screen
Appears with the image on each of the tab that was lastly played back/
recorded (B for the still image).
Searches for images
by date (p. 33)
Stop (go to the
VISUAL INDEX
screen)
Beginning of the
movie/previous
movie
Return (to the
VISUAL INDEX
screen)
Toggles Play or Pause as you touch
Next movie
Reverse/ Forward
The recording
date/time*
22
z Tips
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
You can slow down the playback speed by touching / during pause.
You can adjust volume by selecting (HOME) t (SETTINGS) t [SOUND SETTINGS] t
[VOLUME], then with / .
Still images:
Touch the , or tab and the still image to be played back.
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 60).
To cancel Easy Handycam operation
Press EASY A again. disappears
from the LCD screen.
Menu settings during Easy Handycam
operation
Press (HOME) C (or B) to display
the menu items available for setup changes
(p. 9, 53).
b Notes
Most of the menu items automatically return to
the default settings. The settings of some menu
items are fixed. For details, see page 95.
You cannot use (OPTION) menu.
Cancel Easy Handycam operation if you want to
add effects to images or change settings.
Invalid buttons during Easy Handycam
operation
You cannot use some buttons/functions
during Easy Handycam operation since
they are automatically set (p. 95). If you set
an invalid operation, [Invalid during Easy
Handycam operation] may appears.
Go to the VISUAL
INDEX screen
Return (to the
VISUAL INDEX
screen)
Slideshow (p. 34)
The recording
date/time*
Previous/Next
23
Recording/Playback
Recording/Playback
Recording
b Notes
If the ACCESS lamp is lit or flashing after
recording is finished, it means data is still being
written onto the hard disk or “Memory Stick
Duo.” Do not apply shock or vibration to your
camcorder, and do not remove the battery or AC
Adaptor.
The maximum continuous recordable time is
approximately 13 hours.
When a movie file exceeds 2 GB, the next
movie file is created automatically.
z Tips
You can check the free hard disk space by
touching (HOME) t (MANAGE
HDD/MEMORY) t [ INFO] (p. 50).
POWER switch A
PHOTO F
(HOME) D
START/STOP C
START/STOP B
Lens cover
Open the lens cover before
recording (DCR-SR32E/
SR33E/SR42E/SR52E/
SR62E/SR72E/SR82E) (p. 19)
(HOME) E
ACCESS lamp
(Hard disk)
(Movie) lamp /
(Still) lamp
24
You can record movies on the hard disk of
your camcorder. For the recordable time,
see page 54.
1 Turn the POWER switch A until
the (Movie) lamp lights up.
2 Press START/STOP B (or C).
To stop recording, press START/STOP
again.
You can record still images on the hard disk
of your camcorder in the default setting. To
record still images on a “Memory Stick
Duo,” change the recording media. For the
number of recordable still images, see
page 57.
1 Turn the POWER switch A until
the (Still) lamp lights up.
2 Press PHOTO F lightly to adjust
the focus A (a beep sounds),
then press it fully B (a shutter
click sounds).
When disappears, the image has
been recorded.
To switch the shooting mode using the
(HOME) D (or E) button
On the HOME MENU, touch
(CAMERA) t [MOVIE] or [PHOTO].
To capture high resolution still images
during recording a movie (Dual Rec)
(DCR-SR190E/SR200E/SR290E/SR300E)
t For details, see page 26.
To change the recording media of still
images
t For details, see page 27.
Recording movies
[STBY] b [REC]
Recording still images
Flashing b Lights up
25
Recording/Playback
You can zoom in up to the magnifications
shown in the following table.
(optical zoom)
You can adjust the magnifications with the
power zoom lever or the zoom buttons on
the LCD frame.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
b Notes
[STEADYSHOT] may not reduce image
blurring as desired when the power zoom lever
is set to the T (Telephoto) side (except for DCR-
SR290E/SR300E).
Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the lever
may also be recorded.
You cannot change the zoom speed with the
zoom buttons on the LCD frame.
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
Using [DIGITAL ZOOM] (p. 55) let you zoom
in further than the magnification shown in the
table.
Sound picked up by the built-in microphone
is converted to 5.1ch surround sound and
recorded.
Your camcorder has Dolby Digital 5.1
Creator installed for recording 5.1ch
surround sound. Enjoy realistic sound when
playing the movie on devices that support
5.1ch surround sound.
Dolby Digital 5.1 Creator, 5.1ch surround sound
1 Glossary (p. 127)
b Notes
5.1ch sound is converted to 2ch when played back
on your camcorder.
is displayed on the screen during 5.1ch
recording/playback.
Zooming
DCR-SR32E/SR33E/SR42E 40 ×
DCR-SR52E/SR62E/SR72E/SR82E 25 ×
DCR-SR190E/SR200E/SR290E/SR300E 10 ×
Close view: (Telephoto)
Wider range of view:
(Wide angle)
Recording sound with more
presence (5.1ch surround
recording) (DCR-SR190E/
SR200E/SR290E/SR300E)
Built-in
microphone
Recording/Playback
26
Press (flash) repeatedly to select an
appropriate setting.
No indication (Auto flash): Automatically
flashes when there is insufficient ambient
light.
r
(Forced flash): Always uses the flash
regardless of the surrounding brightness.
r
(No flash): Records without flash.
b Notes
The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
The flash charge lamp flickers while charging
the flash, and remains lit when the battery
charge is complete.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
When attaching a conversion lens (optional) or a
filter (optional) to your camcorder, the flash
light does not emit light.
z Tips
You can change the brightness of the flash by
setting [FLASH LEVEL] (p. 59), or you can
prevent the redeye by setting [REDEYE
REDUC] (p. 59).
You can capture high quality still images
while recording a movie on the hard disk.
1 Turn the POWER switch until the
(Movie) lamp lights up, then press START/
STOP to start movie recording.
2 Press PHOTO fully.
After you start recording, and before you
finish, you can capture up to 3 frames of
still images from your movie.
3 Press START/STOP to stop movie
recording.
Captured still images appear one by one,
and the images are recorded. When
disappears, the image has been recorded.
b Notes
When you record still images on a “Memory
Stick Duo,” do not eject the “Memory Stick
Duo” before recording a movie is finished and
the still images are recorded on it.
You cannot use the flash during Dual Rec.
Using the flash (DCR-SR190E/
SR200E/SR290E/SR300E)
Flash
Flash charge
lamp
Capturing high quality still
images during movie recording
(Dual Rec) (DCR-SR190E/
SR200E/SR290E/SR300E)
Orange color
boxes indicate the
number of
captured images.
When capturing is
finished, the color
changes to orange.
27
Recording/Playback
z Tips
Still images are recorded in the following sizes
with Dual Rec.
DCR-SR190E/SR200E:
2.3M (16:9 (wide))
–1.7M (4:3)
DCR-SR290E/SR300E:
4.6M (16:9 (wide))
–3.4M (4:3)
You can record still images during recording
standby in the same way as when the POWER
switch is set to (Still). You can also record
with the flash.
You can change the recording media of still
images to a “Memory Stick Duo.” In the
default setting, still images are recorded on
the hard disk of the camcorder.
You can use only a “Memory Stick Duo
marked with or
(p. 111).
Open the LCD panel, then insert the
“Memory Stick Duo” into the Memory
Stick Duo slot in the right direction until it
clicks.
To change the recording media of still
images
1 Touch (OPTION) t tab t
[STILL MEDIA].
2 Select the media in which you want to
save still images, then touch .
Your camcorder returns to recording
standby mode. If you select [MEMORY
STICK], appears on the screen.
To eject a “Memory Stick Duo”
Open the LCD panel, lightly push the
“Memory Stick Duo” in once.
b Notes
Do not try to force the “Memory Stick Duo” out.
Doing so may result in damage.
When the ACCESS lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
If you insert the “Memory Stick Duo” into the
slot in the wrong direction, the “Memory Stick
Duo,” the “Memory Stick Duo” slot, or image
data may be damaged.
z Tips
The number of recordable images varies
depending on the image quality or the image
size. For details, see page 57.
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E:
Set the NIGHTSHOT PLUS switch to ON.
( appears.)
Recording still images on a
“Memory Stick Duo”
ACCESS lamp
(“Memory Stick Duo”)
Recording in dark places
(NightShot plus/NightShot)
Infrared port
28
b Notes
The NightShot plus and Super NightShot plus
functions use infrared light. Therefore, do not
cover the infrared port with your fingers or other
objects, and remove the conversion lens
(optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
Do not use the NightShot plus and Super
NightShot plus functions in bright places. This
may cause a malfunction.
z Tips
To record an image brighter, use Super
NightShot plus function (p. 70). To record an
image more faithfully to the original colors, use
Color Slow Shutter function (p. 70).
DCR-SR190E/SR200E/SR290E/SR300E:
Set the NIGHTSHOT switch to ON. (
appears.)
b Notes
The NightShot and Super NightShot functions
use infrared light. Therefore, do not cover the
infrared port with your fingers or other objects,
and remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
Do not use the NightShot and Super NightShot
functions in bright places. This may cause a
malfunction.
z Tips
To record an image brighter, use Super
NightShot function (p. 70). To record an image
more faithfully to the original colors, use Color
Slow Shutter function (p. 70).
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To
cancel the back light function, press BACK
LIGHT again.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
z Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
To select the aspect ratio of the
movies
DCR-SR32E/SR33E/SR42E:
1 Turn the POWER switch until the
(Movie) lamp lights up.
NIGHT SHOT
OFF
ON
Infrared port
Adjusting the exposure for
backlit subjects
Recording in mirror mode
Selecting the aspect ratio (16:9
or 4:3) of the recording image
29
Recording/Playback
2 On the HOME MENU, touch
(SETTINGS) t [MOVIE
SETTINGS] t [WIDE SELECT] t
[4:3] or [16:9 WIDE] (p. 54).
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E:
1 Turn the POWER switch until the
(Movie) lamp lights up.
2 Press WIDE SELECT repeatedly to
select the desired screen aspect ratio.
b Notes
Differences in the angle of view between 16:9
(wide) and 4:3 vary depending on the zoom
position.
When you view the movie on a TV, set [TV
TYPE] to [16:9] or [4:3] according to your TV
(16:9/4:3) (p. 62).
When you view 16:9 (wide) images with [TV
TYPE] set to [4:3], they may appear rough
depending on subjects.
To select the aspect ratio of the still
images (except for DCR-SR32E/
SR33E/SR42E)
1 Turn the POWER switch until the
(Still) lamp lights up.
The aspect ratio changes to 4:3
automatically.
2 Press WIDE SELECT repeatedly to
select the desired screen aspect ratio.
b Notes
For DCR-SR52E/SR62E/SR72E/SR82E, the
size of still images is [ 0.7M] (16:9 (wide))
or [1.0M] (4:3) at maximum.
For DCR-SR190E/SR200E, the size of still
images is [ 3.0M] (16:9 (wide)) or [4.0M]
(4:3) at maximum.
For DCR-SR290E/SR300E, the size of still
images is [ 4.6M] (16:9 (wide)) or [6.1M]
(4:3) at maximum.
z Tips
For the number of recordable still images, see
page 57.
Fast moving subjects and actions, which
cannot be captured under the ordinary
shooting conditions, can be shot in smooth
moving slow-motion for about 3 seconds.
This is useful to shoot fast actions such as a
golf or tennis swing.
1 Turn the POWER switch to turn on the
camcorder.
2 Press (HOME) A (or B) to display
the HOME MENU.
3 Touch (CAMERA).
4 Touch [SMTH SLW REC].
Recording the fast action in
slow-motion (SMTH SLW REC)
(DCR-SR190E/SR200E/SR290E/
SR300E)
(HOME) B
(HOME) A
30
5 Press START/STOP.
An about 3 second-movie is recorded as a
12 second-slow-motion-movie.
When [Recording···] disappears, recording
is finished.
Touch to cancel the smooth slow
recording.
To change the setting
Touch (OPTION) t tab, then
select the setting you want to change.
• [TIMING]
Select the recording start point after
START/STOP is pressed. The default
setting is [3sec AFTER].
• [RECORD SOUND]
Select [ON] ( ) to superimpose sounds
such as conversation on the slow motion
pictures (The default setting is [OFF]).
Your camcorder records sounds for about
12 seconds while [Recording···] is
displayed in step 5.
b Notes
Sounds are not recorded during the about 3
second-movie shooting.
Image quality of [SMTH SLW REC] is not as
good as that of normal recording.
[3sec AFTER]
[3sec BEFORE]
31
Recording/Playback
Recording/Playback
Playback
1 Turn the POWER switch A to turn on your camcorder.
2 Press (VIEW IMAGES) B (or C) button.
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to
display the thumbnails.)
1 : Displays movies.
2 : Displays still images on the hard disk.
3 : Displays still images on a “Memory Stick Duo.”
z Tips
Moving the power zoom lever F let you select whether to display 6 or 12 images on the
VISUAL INDEX screen. To fix this number, touch (SETTINGS) on the HOME MENU
t [VIEW IMAGES SET] t [ DISPLAY] (p. 61).
POWER
switch A
Power zoom lever F
(HOME) E
(VIEW IMAGES) B button
(HOME) D
(VIEW
IMAGES) C
button
Previous
6 images
Next
6 images
Searches for images
by date (p. 33)
Appears with the image on each of the tab that was lastly played back/
recorded (B for the still image).
Returns to the
recording screen
(OPTION)
Returns to the
recording screen
32
3 Start playback.
Touch the tab, and the movie to be played back.
Touch the , or tab, and the still image to be played back.
To switch to the playback mode using
the (HOME) D (or E) button
On the HOME MENU, touch (VIEW
IMAGES) t [VISUAL INDEX].
To adjust the sound volume of movies
Touch (OPTION) t tab t
[VOLUME], then adjust the volume with
/.
z Tips
When playback from the selected movie reaches
the last movie, the screen returns to the
VISUAL INDEX screen.
Touch / during pause to play back
movie slowly.
One touch of
/ makes the reverse/
fast forward approximately 5 times faster, 2
touches makes it approximately 10 times faster,
3 touches makes it approximately 30 times
faster, and 4 touches makes it approximately 60
times faster.
Movies
Beginning of the
movie/previous
movie
Toggles Play or Pause as you touch
Next movie
Stop (go to the VISUAL
INDEX screen)
Reverse/ Forward
(OPTION)
Return (to the VISUAL
INDEX screen)
Still images
Previous/Next
Go to the VISUAL
INDEX screen
(OPTION)
Return (to the VISUAL
INDEX screen)
Slide show button (p. 34)
33
Recording/Playback
You can magnify still images from about
1.1 to 5 times the original size.
Magnification can be adjusted with the
power zoom lever or the zoom buttons on
the LCD frame.
1 Play back the still images you want to
magnify.
2 Magnify the still image with T
(Telephoto).
The screen is framed.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch .
You can search for desired images by date
efficiently.
1 Turn the POWER switch to turn on the
camcorder, and press (VIEW
IMAGES) button.
The VISUAL INDEX screen appears on
the LCD screen.
2 To search for movies, touch tab. To
search for still images, touch tab.
You cannot search for images recorded on
“Memory Stick Duo” by date.
3 Touch [DATE].
The recording dates of images are
displayed on the screen.
4 Touch Previous/Next Date button to
select the date of the desired image.
5 Touch while the selected date of
the desired image is highlighted.
The images for selected date are
displayed on the VISUAL INDEX
screen.
Using PB zoom Searching for desired images by
date (Date Index)
Return to the VISUAL INDEX screen
Previous/Next Date button
Recording/Playback
34
Touch on the still image playback
screen.
The slide show begins from the selected
image.
Touch to stop the slide show. To
restart, touch again.
b Notes
You cannot operate playback zoom during slide
show.
z Tips
You can set continuous slide show playback by
selecting (OPTION) t tab t
[SLIDE SHOW SET]. The default setting is
[ON] (continuous playback).
Playing back a series of still
images (Slide show)
35
Recording/Playback
Playing the image on a TV
Connect your camcorder to the input jack of TV or VCR using A/V connecting cable 1 or
A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall socket using the
supplied AC Adaptor for this operation (p. 13). Refer also to the instruction manuals supplied
with the devices to be connected.
To view the recorded images on a computer, see page 73.
1 A/V connecting cable (supplied)
The Handycam Station and your camcorder are
both equipped with A/V OUT jacks (p. 120,
121). Connect the A/V connecting cable either
to the Handycam Station or to your camcorder,
according to your setup.
2 A/V connecting cable with S VIDEO
(optional)
When connecting to another device via the S
VIDEO jack, by using an A/V connecting cable
with an S VIDEO cable (optional), higher
quality images can be produced than with an
A/V connecting cable. Connect the white and
red plug (left/right audio) and the S VIDEO
plug (S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable (optional). The
yellow plug connection is not necessary. S
VIDEO connection only will not output audio.
b Notes
Do not connect A/V connecting cables to both
your camcorder and the Handycam Station at the
same time. The image might get disturbed.
z Tips
You can display the counter on the TV screen by
setting [DISP OUTPUT] to [V-OUT/PANEL]
(p. 63).
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
A/V OUT
IN IN
S VIDEO
VIDEO
AUDIOAUDIO
VIDEO
: Signal flow
A/V OUT jack
Device without
an S VIDEO jack
Device with an
S VIDEO jack
(Yellow)
(White)
(Red)
VCRs or TVs
(Yellow)
(White)
(Red)
36
To set the aspect ratio according to the
connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn the POWER switch to turn on the
camcorder.
2 Touch (HOME) t
(SETTINGS) t [OUTPUT
SETTINGS] t [TV TYPE] t [16:9]
or [4:3] t .
b Notes
When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the
recorded image’s aspect ratio switches between
16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the still images recorded in
4:3 aspect ratio may not be displayed full
screen. This is not a malfunction.
When you play back an image recorded in 16:9
(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or red
(right channel) plug to the audio input jack
of your TV or VCR. When you want to play
the sound in monaural mode, use a
connecting cable for that purpose.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder (For models with the mark
printed on their bottom surfaces only). This
adaptor is designed for output use only.
TV/VCR
37
Recording/Playback
Saving images
Recorded images are stored on the internal hard disk of your camcorder. Due to the limited
capacity of the internal hard disk, make sure that you save the image data to some type of external
media such as a DVD-R or a computer.
You can save the images recorded on the camcorder as described below.
By using the software on the supplied CD-ROM, you can save images on a DVD or the hard
disk of a computer.
Saving images using a computer
Creating a DVD with One
Touch
(One Touch Disc Burn)
You can save images recorded on
the camcorder directly to a DVD
with ease.
See “Creating a DVD with
One Touch” on page 77.
Saving images on a computer
You can save images recorded on
the camcorder on the hard disk of a
computer.
See “Importing images to
a computer” on page 81.
Creating a DVD with selected
images
You can save images imported to
your computer on a DVD. You can
also edit those images.
See “Creating and
copying a DVD” on page
90.
Saving images by connecting your camcorder to other devices
Dubbing to VCR or DVD/HDD
devices
See “Dubbing to VCR or
DVD/HDD recorders” on
page 45.
38
Editing
(OTHERS) category
This category enables you to edit the
images, to print still images and to connect
your camcorder to a computer.
DELETE
You can delete images on the hard disk or a
“Memory Stick Duo” (p. 38).
EDIT
You can edit the images on the hard disk or
a “Memory Stick Duo” (p. 40, 41).
PLAYLIST EDIT
You can create and edit a Playlist (p. 42).
PRINT
You can print still images on a connected
PictBridge printer (p. 46).
COMPUTER
You can connect your camcorder to a
computer (p. 73).
Deleting images
You can delete images recorded on the hard
disk or a “Memory Stick Duo” using your
camcorder.
b Notes
You cannot restore images once they are
deleted.
z Tips
You can select up to 100 images at one time.
You can delete a image when viewing it by
selecting (OPTION) t tab t
[DELETE].
You can free hard disk space by deleting
image data from the camcorder.
You can check the free hard disk space of
the camcorder using [ INFO] (p. 50).
b Notes
Important data should be saved on external media
(p. 37).
Do not try to delete the files on the hard disk of
the camcorder using a computer.
1 On the (HOME MENU), touch
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE] (movies) or
[ DELETE] (still images),
according to the type of image
you want to delete.
Item list
(OTHERS) category
Deleting the images on the hard
disk
39
Editing
4 Touch the image to be deleted.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
5 Touch t [YES] t .
To delete all movies or still images at
one time
In step 3, touch [ DELETE ALL] or
[ DELETE ALL] t [YES] t [YES]
t .
To delete all the movies or the still
images recorded on the same day at
one time
1 On the (HOME MENU), touch
(OTHERS) t [DELETE] t [
DELETE].
2 Touch [ DELETE by date] or [
DELETE by date] according to the type
of image you want to delete.
The recording dates of images are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
image.
4 Touch while the selected recording
date is highlighted.
The images recorded on the selected
date are displayed on the screen.
Touch the image on the LCD screen to
confirm the image. Touch to return
to the previous screen.
5 Touch t [YES] t .
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting the
images. It may damage the hard disk.
If the deleted movie is included in the Playlist
(p. 42), the movie is deleted also from the
Playlist.
z Tips
To delete all images recorded on the hard disk,
and recover all the recordable space of hard
disk, format the hard disk (p. 49).
The images recorded by this camcorder and
stored onto the hard disk are called “original.”
To delete images on a “Memory Stick
Duo,” insert it in your camcorder before the
operation.
1 On the (HOME MENU), touch
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE].
Previous/Next button
Deleting the still images in the
“Memory Stick Duo”
40
4 Touch the still image to be
deleted.
The selected still image is marked with
.
Press and hold the still image on the LCD
screen to confirm the still image.
Touch to return to the previous
screen.
5 Touch t [YES] t .
To delete all still images on the
“Memory Stick Duo”
In step 3, touch [ DELETE ALL] t
[YES] t [YES] t .
b Notes
You cannot delete still images in the following
cases:
“Memory Stick Duo” is write-protected
(p. 111).
write-protection is set to the still images by
the other device.
z Tips
To delete all images recorded on the “Memory
Stick Duo,” format the “Memory Stick Duo”
(p. 50).
Dividing a movie
You can divide movies on the hard disk of
your camcorder.
b Notes
During Easy Handycam operation, you cannot
divide movies. Cancel Easy Handycam
operation.
1 On the (HOME MENU), touch
(OTHERS) t [EDIT].
2 Touch [DIVIDE].
3 Touch the movie to be divided.
The selected movie starts playback.
4 Touch at the point where
you want to divide the movie into
scenes.
The movie pauses.
Play and pause toggles as you press
.
5 Touch t [YES] t .
Adjusts the dividing point with more
precision after the dividing point has
been selected with .
Returns to the beginning of the
selected movie.
41
Editing
b Notes
You cannot restore movies once they are
divided.
Do not remove the battery pack or the AC
Adaptor from your camcorder while dividing
the movie. It may damage the hard disk.
If the divided original movie is included in the
Playlist, the movie in the Playlist will also be
divided.
A slight difference may occur from the point
where you touch and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
Copying still images
You can copy still images from the hard
disk to a “Memory Stick Duo.”
Insert a “Memory Stick Duo” in your
camcorder before the operation.
z Tips
You can select up to 100 still images at one
time.
You can copy a still image when viewing it by
selecting (OPTION) t tab t
[COPYt ].
1 On the (HOME MENU), touch
(OTHERS) t [EDIT] t
[COPY].
2 Touch [ t COPY].
3 Touch the still image to be
copied.
The selected still image is marked with
.
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch t [YES].
Copying starts.
5 When [Completed.] appears,
touch .
42
To copy all the still images recorded
on the same day at one time
1 On the (HOME MENU), touch
(OTHERS) t [EDIT] t [COPY].
2 Touch [ t COPY by date].
The recording dates of still images are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
still image.
4 Touch while the selected recording
date is highlighted.
The still images recorded on the
selected date are displayed on the
screen.
Touch the image on the LCD screen to
confirm the still image. Touch to
return to the previous screen.
5 Touch t [YES] t .
b Notes
Use the AC Adaptor as the power source to
prevent your camcorder from running out of
power during copying.
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during copying.
It may take long when there are many still
images to be copied.
You cannot copy still images on a “Memory
Stick Duo” to the hard disk.
Previous/Next button
Creating the Playlist
A Playlist is a list showing thumbnails of
the movies that you have selected. The
original movies are not modified even
though you edit or delete the movies in the
Playlist.
b Notes
During Easy Handycam operation, you cannot
add movies to the Playlist or edit the Playlist.
Cancel Easy Handycam operation.
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST
EDIT].
2 Touch [ ADD].
3 Touch the movie to be added to
the Playlist.
.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch t [YES] t .
43
Editing
To add all the movies recorded on the
same day at one time
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ ADD by date].
The recording dates of movies are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
movie.
4 Touch while the selected recording
date is highlighted.
The movies recorded on the selected
date are displayed on the screen.
Touch the image on the LCD screen to
confirm the movie. Touch to return
to the previous screen.
5 Touch t [YES] t .
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while editing the
Playlist. It may damage the hard disk.
You cannot add still images to a Playlist.
z Tips
You can add a maximum of 99 movies to the
Playlist.
You can add a movie when viewing it by
selecting (OPTION) t tab t
[ ADD].
You can copy the Playlist to a DVD as it is, by
using the supplied software (p. 91).
1 On the (HOME MENU), touch
(VIEW IMAGES) t
[PLAYLIST]
The Playlist screen appears.
2 Touch the image from which you
want to playback.
The Playlist is played back from the
selected image to the end, then the
screen returns to the Playlist screen.
To erase unnecessary images from
the Playlist
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ ERASE].
To erase all the images from the
Playlist, touch [ ERASE ALL] t
[YES] t [YES] t .
3 Select the image to be deleted from the
list.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
Previous/Next button
Playing the Playlist
44
4 Touch t [YES] t .
z Tips
The original images are not changed even if you
erase the images from the Playlist.
To change the order within the Playlist
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ MOVE].
3 Select the image to be moved.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch .
5 Select the destination with [T]/[t].
6 Touch t [YES] t .
z Tips
When you select multiple images, the images
are moved following the order appeared in the
Playlist.
Destination bar
45
Editing
Dubbing to VCR or DVD/HDD recorders
You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation
(p. 13). Refer also to the instruction manuals supplied with the devices to be connected.
b Notes
Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
The Handycam Station and your camcorder
are both equipped with A/V OUT jacks
(p. 120, 121). Connect the A/V connecting
cable either to the Handycam Station or to
your camcorder, according to your setup.
B A/V connecting cable with S VIDEO
(optional)
When connecting to another device via the S
VIDEO jack, by using an A/V connecting
cable with an S VIDEO cable (optional),
higher quality images can be produced than
with an A/V connecting cable. Connect the
white and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the A/V
connecting cable with an S VIDEO cable
(optional). The yellow plug connection is not
necessary. S VIDEO connection only will not
output audio.
b Notes
To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, set (SETTINGS) t [OUTPUT
SETTINGS] t [DISP OUTPUT] t [LCD
PANEL] (the default setting) on the HOME
MENU (p. 63).
To record the date/time and camera settings
data, display them on the screen (p. 60).
When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
A/V OUT
IN IN
S VIDEO
VIDEO
AUDIOAUDIO
VIDEO
VCRs or DVD/
HDD recorders
: Video/Signal flow
A/V OUT jack
Device without an
S VIDEO jack
Device with an
S VIDEO jack
(Yellow)
(White)
(Red)
(Yellow)
(White)
(Red)
46
1 Turn on your camcorder, and
press (VIEW IMAGES) button.
Set [TV TYPE] according to the display
device (p. 62).
2 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
3 Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) 1 or
an A/V connecting cable with S
VIDEO (optional) 2.
Connect your camcorder to the input
jacks of the recording device.
4 Start the playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals
supplied with your recording device for
details.
5 When dubbing is finished, stop
the recording device, and then
your camcorder.
Printing recorded
images
(PictBridge
compliant printer)
You can print out still images using a
PictBridge compliant printer, without
connecting the camcorder to a computer.
Connect your camcorder to the AC Adaptor
to obtain power from the wall socket
(p. 13). Turn on the printer.
To print still images on a “Memory Stick
Duo,” insert the “Memory Stick Duo”
containing them into your camcorder.
1 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
2 Set the camcorder onto the
Handycam Station securely, then
turn the POWER switch to turn
on.
3 Connect the (USB) jack of the
Handycam Station to the printer
using the supplied USB cable.
Connecting your camcorder to
the printer
47
Editing
[USB SELECT] appears on the screen
automatically.
4 Touch [ PRINT] (hard disk) or
[ PRINT] (“Memory Stick Duo”)
depending on the media of the
image to be printed.
You can select a still image on the
screen.
b Notes
We can guarantee the operation of only models
that are PictBridge compatible.
1 Touch the still image to be
printed.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
2 Touch (OPTION), set the
following options, then touch
.
[COPIES]: Set number of copies of a
still image to be printed. You can set up
to 20 copies.
[DATE/TIME]: Select [DATE],
[DAY&TIME], or [OFF] (no date/time
printed).
[SIZE]: Select the paper size.
If you do not change the setting, go to
step 3.
3 Touch [EXEC] t [YES] t .
The image selection screen appears
again.
To finish printing
Touch on the image selection screen.
b Notes
Refer also to the instruction manual of the
printer to be used.
Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
To operate the POWER switch
To press (VIEW IMAGES) button
To remove your camcorder from the
Handycam Station
To disconnect the USB cable (supplied) from
the Handycam Station or the printer
To remove the “Memory Stick Duo” from
your camcorder, in the case of [ PRINT]
If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
You can select only the paper sizes that the
printer can print.
Printing
When connection is complete,
(PictBridge connecting) appears on
the screen.
48
On some printer models, the top, bottom, right,
and left edges of images may be trimmed. If you
print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
Some printer models may not support the date
printing function. Refer to your printer’s
instruction manual for details.
The images described below may not be printed
out:
The image edited by a computer
The image recorded by other devices
The image file exceeding 3 MB
The image file larger than 2848 × 2136 pixels
z Tips
PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
You can print a still image when viewing it by
selecting (OPTION) t tab t
[PRINT].
49
Utilizing recording media
Utilizing recording media
(MANAGE HDD/
MEMORY) category
This category enables you to use the hard
disk or a “Memory Stick Duo” for various
purposes.
FORMAT
You can format the hard disk and recover
recordable free space (p. 49).
FORMAT
You can format the “Memory Stick Duo”
and recover the recordable free space
(p. 50).
INFO
You can display the hard disk capacity
(p. 50).
Formatting the hard
disk or the “Memory
Stick Duo”
You can delete all the images on the hard disk
of the camcorder to recover recordable free
space to allow you to write in.
Connect your camcorder to the wall socket
using the supplied AC adaptor for this
operation (p. 13).
b Notes
To avoid the loss of important images, you should
save them (p. 37) before performing
[FORMAT].
1 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[FORMAT].
2 Touch [YES] t [YES].
3 When [Completed.] appears,
touch .
b Notes
While [ FORMAT] is activated, do not
remove the AC Adaptor or the battery pack.
Item list
(MANAGE HDD/MEMORY)
category
Formatting the hard disk
50
Formatting deletes all images on a
“Memory Stick Duo.”
1 Turn on your camcorder.
2 Insert the “Memory Stick Duo” to
be formatted into your
camcorder.
3 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[FORMAT].
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch .
b Notes
Even the still images protected with another
device against accidental deletion are also
deleted.
Do not attempt the following operations when
[Executing...] is on the screen:
To operate the POWER switch or buttons
To remove the “Memory Stick Duo”
Formatting the “Memory Stick
Duo”
Checking the hard
disk information
You can display the hard disk information,
and check the approximate amount of free
hard disk space.
On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[INFO].
To turn off the display
Touch .
b Notes
The calculation for hard disk space is 1MB =
1 048 576 bytes. The fractions less than MB are
discarded when the hard disk space is displayed.
The displayed size of the whole hard disk space
will be slightly smaller than the size shown
below despite of displaying both free and used
hard disk space.
DCR-SR32E/SR42E/SR52E/SR62E:
30 000 MB
DCR-SR72E/SR82E:
60 000MB
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
40 000MB
Since there is the management file area, the used
space is not displayed as 0MB even if you
perform [ FORMAT] (p. 49).
51
Utilizing recording media
Preventing data on the hard disk of the
camcorder from being recovered
[ EMPTY] allows you to write non
important data onto the hard disk of the
camcorder. In this way, it may become
more difficult to recover any original data.
When you dispose or transfer the
camcorder to others, it is recommended that
you perform [ EMPTY].
Connect your camcorder to the wall socket
using the supplied AC Adaptor for this
operation (p. 13)
b Notes
If you perform [ EMPTY], all the images
are deleted. To avoid the loss of important
images, they should be saved (p. 37) before
performing [ EMPTY].
You cannot perform [ EMPTY] unless you
connect the AC adaptor to the wall socket.
Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
While performing [ EMPTY], do not apply
any vibrations or shocks.
1 Make sure the AC Adaptor is
connected, then turn the POWER
switch to turn on.
z Tips
You can perform this operation, whichever
position of the (Movie) lamp/ (Still)
lamp is lit.
2 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[ FORMAT].
The [ FORMAT] screen appears.
3 Press and hold BACK LIGHT
button for a few seconds.
The [ EMPTY] screen appears.
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch .
b Notes
The actual performing time for [ EMPTY]
is as follows;
DCR-SR32E/SR42E/SR52E/SR62E:
approx. 30 minutes
DCR-SR72E/SR82E:
approx. 60 minutes
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
approx. 40 minutes
If you stop performing [ EMPTY] between
step 4 and 5, be sure to complete the operation
by performing [ FORMAT] or [
EMPTY] when you use the camcorder next
time.
52
Customizing your camcorder
What you can do with the (SETTINGS)
category of the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
1 Turn on your camcorder, then
press (HOME).
2 Touch (SETTINGS).
3 Touch the desired setup item.
If the item is not on the screen, touch v/
V to change the page.
4 Touch the desired item.
If the item is not on the screen, touch v/
V to change the page.
5 Change the setting, then touch
.
Using the HOME MENU
(SETTINGS) category
(HOME)
(HOME)
53
Customizing your camcorder
MOVIE SETTINGS (p. 54)
PHOTO SETTINGS (p. 57)
VIEW IMAGES SET (p. 60)
SOUND/DISP SET*
6
(p. 61)
OUTPUT SETTINGS (p. 62)
CLOCK/ LANG (p. 63)
GENERAL SET (p. 64)
*
1
DCR-SR32E/SR33E/SR42E
*
2
DCR-SR190E/SR200E/SR290E/SR300E
*
3
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E
*
4
You can set these items also during Easy
Handycam operation (p. 20).
*
5
DCR-SR290E/SR300E
*
6
[SOUND SETTINGS] (during Easy
Handycam operation)
List of the (SETTINGS)
category items
Items Page
REC MODE
54
NIGHTSHOT LIGHT
54
WIDE SELECT*
1
54
DIGITAL ZOOM
55
STEADYSHOT
55
AUTO SLW SHUTTR
55
GUIDEFRAME*
2
56
ZEBRA*
2
56
REMAINING
56
FLASH LEVEL*
2
59
REDEYE REDUC*
2
59
Items Page
IMAGE SIZE*
3
*
4
57
QUALITY
58
FILE NO.
58
NIGHTSHOT LIGHT
54
STEADYSHOT*
5
55
GUIDEFRAME*
2
56
ZEBRA*
2
56
FLASH LEVEL*
3
59
REDEYE REDUC*
3
59
STILL MEDIA*
4
27
Items Page
DATA CODE
60
DISPLAY
61
Items Page
VOLUME*
4
61
BEEP*
4
61
LCD BRIGHT
61
LCD BL LEVEL
62
LCD COLOR
62
Items Page
TV TYPE
62
DISP OUTPUT
63
Items Page
CLOCK SET*
4
17
AREA SET
63
SUMMERTIME
63
LANGUAGE SET*
4
63
Items Page
DEMO MODE
64
CALIBRATION
115
A.SHUT OFF
64
REMOTE CTRL*
3
64
DROP SENSOR
64
54
MOVIE SETTINGS
(Items for recording movies)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
You can select a recording mode to record a
movie with the image quality from 3 levels.
HQ
Records in high quality mode.
(9M (HQ))
B SP
Records in standard quality mode.
(6M (SP))
LP
Increases the recording time (Long Play).
(3M (LP))
Recordable time (approx.)
DCR-SR32E/SR42E/SR52E/SR62E:
REC MODE
Recording mode Recordable time
HQ
7 hours 20 min.
SP
10 hours 50 min.
LP
20 hours 50 min.
DCR-SR72E/SR82E:
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
b Notes
If you record in the LP mode, the quality of
scenes may be degraded, or scenes with quick
movements may appear with a block noise when
you play back the movie.
When using either the NightShot plus/
NightShot (p. 27) or [S. NIGHTSHOT
PLS] (p. 70)/[SUPER NIGHTSHOT]
(p. 70) function to record, you can record
clearer images by setting [NIGHTSHOT
LIGHT], which emits infrared light
(invisible), to [ON] (the default setting).
b Notes
Do not cover the infrared port with your fingers
or other objects.
Remove the conversion lens (optional).
The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
When recording images, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
Recording mode Recordable time
HQ
14 hours 40 min.
SP
21 hours 40 min.
LP
41 hours 50 min.
Recording mode Recordable time
HQ
9 hours 30 min.
SP
14 hours 30 min.
LP
28 hours
NIGHTSHOT LIGHT
WIDE SELECT
(DCR-SR32E/SR33E/
SR42E)
56
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
B OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
IRE represents the screen brightness level.
B AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
When your camcorder recognizes the
remaining hard disk capacity with the
POWER switch is set to (Movie).
When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch is set to (Movie).
When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining hard disk
indicator.
b Notes
When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
S
See page 59.
S
See page 59.
GUIDEFRAME
(DCR-SR190E/SR200E/
SR290E/SR300E)
ZEBRA (DCR-SR190E/
SR200E/SR290E/
SR300E)
REMAINING
FLASH LEVEL
(DCR-SR190E/SR200E/
SR290E/SR300E)
REDEYE REDUC
(DCR-SR190E/SR200E/
SR290E/SR300E)
57
Customizing your camcorder
PHOTO SETTINGS
(Items for recording still images)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
DCR-SR52E/SR62E/SR72E/SR82E:
B 1.0M ( )
Records still images clearly.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 0.7M]
automatically in the aspect ratio 16:9 (wide).
DCR-SR190E/SR200E:
B 4.0M ( )
Records still images clearly.
1.9M ( )
Allows you to record more still images in
relatively clear quality.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 3.0M]
automatically in the aspect ratio 16:9 (wide).
IMAGE SIZE (except
for DCR-SR32E/SR33E/
SR42E)
4.0M
DCR-SR290E/SR300E:
B 6.1M ( )
Records still images clearly.
3.1M ( )
Allows you to record more still images in
relatively clear quality.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 4.6M]
automatically in the aspect ratio 16:9 (wide).
b Notes
You can set [ IMAGE SIZE] only while the
(Still) lamp is lit.
For DCR-SR32E/SR33E/SR42E, the image size
is fixed to [VGA (0.3M)].
z Tips
Still images are recorded in the following sizes
with Dual Rec.
DCR-SR190E/SR200E:
[ 2.3M] (16:9 (wide))
[1.7M] (4:3)
DCR-SR290E/SR300E:
[ 4.6M] (16:9 (wide))
[3.4M] (4:3)
Capacity of the “Memory Stick Duo”
(MB) and the number of recordable
images (approx.)
6.1M
2848 ×
2136
4.6M
2848 ×
1602
4.0M
2304 ×
1728
3.4M
2136 ×
1602
64MB 21
53
28
70
32
81
37
93
128MB 42
105
56
135
64
160
74
185
256MB 76
190
100
250
115
295
130
335
4.0M
60
VIEW IMAGES SET
(Items to customize the display)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
During playback, displays the information
(data code) recorded automatically at the
time of recording.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
DATE/TIME
ADate
BTime
DATA CODE
CAMERA DATA
CSteadyShot off
DBrightness
EWhite balance
FGain
GShutter speed
HAperture value
IExposure
z Tips
appears for an image recorded using a flash
(except for DCR-SR32E/SR33E/SR42E).
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: [DATE/TIME] t
[CAMERA DATA] t [OFF] (no indication)
(except for DCR-SR32E/SR33E/SR42E).
Depending on the hard disk condition, bars [--:--
:--] appear.
Movie
Still image
61
Customizing your camcorder
You can select the number of thumbnails
that appear on the VISUAL INDEX screen.
B ZOOM LINK
Change the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(except for DCR-SR32E/SR33E/SR42E).
DISPLAY
SOUND/DISP SET
(Items to adjust beep and the screen)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
Touch / to adjust the volume
(p. 32).
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody and shutter sound.
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with / .
2 Touch .
z Tips
This adjustment does not affect the recorded
images in any way.
VOLUME
BEEP
LCD BRIGHT
62
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel to
the camcorder body, the setting becomes
[NORMAL] automatically.
z Tips
This adjustment does not affect the recorded
images in any way.
You can adjust the color of the LCD screen
with / .
z Tips
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL
(LCD backlight level)
LCD COLOR
Low intensity High intensity
OUTPUT SETTINGS
(Items for when connecting other devices)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
You need to convert the signal depending
on the TV connected when playing back the
image. The recorded images are played
back as following illustrations.
16:9
(Default setting for DCR-SR52E/SR62E/
SR72E/SR82E/SR190E/SR200E/
SR290E/SR300E)
Select this to view your images on a 16:9
(wide) TV.
4:3
(Default setting for DCR-SR32E/SR33E/
SR42E)
Select this to view your images on a 4:3
standard TV.
TV TYPE
Wide (16:9)
images
4:3 images
Wide (16:9)
images
4:3 images
64
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn the POWER switch
to (Movie).
z Tips
The demonstration will be suspended in
situations such as those described below.
When you press START/STOP or PHOTO.
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
When you remove or insert a “Memory Stick
Duo.”
When you turn the POWER switch to
(Still).
When you press (HOME)/ (VIEW
IMAGES) button.
See page 115.
DEMO MODE
CALIBRATION
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
When you connect your camcorder to a wall
socket, [A.SHUT OFF] is automatically set to
[NEVER].
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 122).
z Tips
Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
[DROP SENSOR] is set to [ON] as the
default setting. When the drop sensor has
detected that the camcorder has been
dropped ( appears), recording or playing
back recorded images may be disabled to
protect the internal hard disk.
b Notes
Set the drop sensor to [ON] (default setting)
when you use the camcorder. Otherwise when
you drop the camcorder, you may damage the
internal hard disk.
In a non-gravity situation, the drop sensor
activates. When you record images during
activity such as roller-coasting or skydiving,
you can set [DROP SENSOR] to [OFF] ( )
so as not to activate the drop sensor.
A.SHUT OFF (Auto shut
off)
REMOTE CTRL (Remote
control) (except for
DCR-SR32E/SR33E/
SR42E)
DROP SENSOR
65
Customizing your camcorder
Activating functions using the OPTION MENU
The OPTION MENU appears just like the
pop-up window that appears when you
right-click the mouse on a computer.
Various functions are displayed in the
context of the operation.
1 While using your camcorder,
touch (OPTION) on the screen.
2 Touch the desired item.
If you cannot find the desired item,
touch another tab to change the page.
3 Change the setting, then touch
.
When the item you want is not on the
screen
Touch another tab. If you cannot find the
item anywhere, the function does not work
under the situation.
b Notes
The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
Some items appear without a tab.
The OPTION MENU cannot be used during
Easy Handycam operation.
Using the OPTION MENU
(OPTION)
Tab
66
See page 65 for setting operation.
*
1
Items that are included also in the HOME
MENU.
*
2
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
*
3
DCR-SR190E/SR200E/SR290E/SR300E
*
4
Except for DCR-SR32E/SR33E/SR42E
*
5
DCR-SR52E/SR62E/SR72E/SR82E
See page 65 for setting operation.
* Items that are included also in the HOME
MENU.
Recording items on the OPTION
MENU
Items *
1
Page
tab
FOCUS
-67
SPOT FOCUS
-67
TELE MACRO
-67
EXPOSURE
-68
SPOT METER
-68
SCENE SELECTION
-68
WHITE BAL.
-69
COLOR SLOW SHTR
-70
S. NIGHTSHOT PLS*
2
-70
SUPER NIGHTSHOT*
3
-70
tab
FADER
-71
D.EFFECT
-71
PICT.EFFECT
-71
tab
REC MODE
a 54
MICREF LEVEL
-71
IMAGE SIZE*
4
a 57
QUALITY
a 58
SELF-TIMER
-71
STILL MEDIA
a 27
FLASH MODE*
5
-72
TIMING*
3
-30
RECORD SOUND*
3
-30
Viewing items on the OPTION
MENU
Items * Page
tab
DELETE
a 38
DELETE by date
a 39
DELETE ALL
a 39
tab
DIVIDE
a 40
ERASE
a 43
ERASE ALL
a 43
MOVE
a 44
-- (A tab depends on the situation)
ADD
a 43
ADD by date
a 43
PRINT
a 46
SLIDE SHOW
-34
VOLUME
a 32
DATA CODE
a 60
SLIDE SHOW SET
-34
ADD
a 42
ADD by date
a 43
COPYt
a 41
COPY by date
a 42
-- (No tab)
COPIES
-47
DATE/TIME
-47
SIZE
-47
67
Customizing your camcorder
Functions set in the OPTION MENU
Items you can set only on the OPTION
MENU will be described below.
The default settings are marked with B.
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1 Touch [MANUAL].
9 appears.
2 Touch (focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus. appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
3 Touch .
To adjust the focus automatically, touch
[AUTO] t in step 1.
b Notes
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
It is easier to focus on the subject by moving the
power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle) to
adjust the zoom for recording. When you want
to record a subject at close range, move the
power zoom lever to W (wide angle), then
adjust the focus.
The focal distance information (the distance at
which the subject is focused on, for when it is
dark and hard to adjust focus) appears for a few
seconds in the following cases; (It will not be
displayed correctly if you are using a conversion
lens (optional).)
When the focus mode is switched from
automatic to manual.
When you set focus manually.
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
1 Touch the subject on the screen.
9 appears.
2 Touch [END].
To adjust the focus automatically, touch
[AUTO] t [
END] in step 1.
b Notes
If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELE MACRO] to [ON]
( ), the zoom (p. 25) moves to the top of
the T (telephoto) side automatically and
allows recording subjects at a close distance
as follows;
DCR-SR32E/SR33E/SR42E:
down to about 43 cm (17 in.)
DCR-SR52E/SR62E/SR72E/SR82E:
down to about 38 cm (15 in.)
DCR-SR190E/SR200E:
down to about 37 cm (14 5/8 in.)
DCR-SR290E/SR300E:
down to about 45 cm (17 3/4 in.)
FOCUS
SPOT FOCUS
TELE MACRO
68
To cancel, touch [OFF], or zoom to wide-
angle (W side).
b Notes
When recording a distant subject, focusing may
be difficult and can take some time.
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
You can fix the brightness of an image
manually. When the subject is too much
brighter or gloomier than the background,
adjust [EXPOSURE].
1 Touch [MANUAL].
appears.
2 Adjust the exposure by touching /
.
3 Touch .
To return the setting to automatic exposure,
touch [AUTO] t in step 1.
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong
contrast between the subject and the
background, such as subjects in the
spotlight on stage.
1 Touch the point where you want to fix and
adjust the exposure on the screen.
appears.
2 Touch [END].
To return the setting to automatic exposure,
touch [AUTO] t [
END] in step 1.
b Notes
If you set [SPOT METER], [EXPOSURE] is
automatically set to [MANUAL].
You can record images effectively in
various situations with the [SCENE
SELECTION] function.
B AUTO
Select this to automatically record images
effectively without the [SCENE
SELECTION] function.
TWILIGHT* ( )
Select this to take night view without
losing the mood.
TWILIGHT PORT. ( )
Select this to take subject in foreground
against night view (DCR-SR190E/
SR200E/SR290E/SR300E).
CANDLE ( )
Select this to take scene without losing
candle mood.
SUNRISE&SUNSET* ( )
Select this to reproduce the atmosphere of
scenes such as sunsets or sunrises.
EXPOSURE
SPOT METER (Flexible
spot meter)
SCENE SELECTION
69
Customizing your camcorder
FIREWORKS* ( )
Select this to take spectacular shots of
fireworks.
LANDSCAPE* ( )
Select to shoot distant subjects clearly.
This setting also prevents your camcorder
from focusing on glass or metal mesh in
windows that comes in between the
camcorder and the subject.
PORTRAIT ( )
Select to bring out the subject such as
people or flowers while creating a soft
background.
SPOTLIGHT** ( )
Select to prevent people’s faces from
appearing excessively white when subjects
are lit by strong light.
SPORTS** ( )
Select to minimize shake when shooting
fast moving subjects (DCR-SR32E/
SR33E/SR42E/SR52E/SR62E/SR72E/
SR82E).
BEACH** ( )
Select to take the vivid blue of the ocean or
a lake.
SNOW** ( )
Select to take bright pictures of a white
landscape.
* Your camcorder is set to focus only on distant
subjects.
** Your camcorder is set not to focus on nearby
subjects.
b Notes
The [WHITE BAL.] setting is cleared when you
set [SCENE SELECTION].
You can adjust the color balance to the
brightness of the recording environment.
B AUTO
The white balance is adjusted
automatically.
OUTDOOR ( )
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Outdoors
– Night views, neon signs and fireworks
– Sunrise or sunset
– Under daylight fluorescent lamps
INDOOR (n)
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Indoors
– At party scenes or studios where the lighting
conditions change quickly
– Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH ( )
The white balance will be adjusted
according to the ambient light.
1 Touch [ONE PUSH].
WHITE BAL. (White
balance)
71
Customizing your camcorder
b Notes
Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
Do not cover the infrared port with your fingers
or other objects.
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode, then touch .
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
WHITE FADER
BLACK FADER
When you select [OLD MOVIE],
appears and you can add an old movie
effect to images.
To cancel [D.EFFECT], touch [OFF].
You can add special effects to an image
during recording or playback. appears.
B OFF
Does not use [PICT.EFFECT] setting.
SEPIA
Images appear in sepia.
B&W
Images appear in black and white.
PASTEL
Images appear as a pale pastel drawing.
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
B NORMAL
Records various surround sounds,
converting them into the certain level.
LOW ( )
Records surround sound faithfully. This
setting is not suitable for recording
conversations.
You can record a still image after about 10
seconds.
Press PHOTO when [SELF-TIMER] is set
to [ON], and appears.
To cancel the count down, touch [RESET].
To cancel the self-timer, select [OFF].
z Tips
You can also operate by pressing PHOTO on
the Remote Commander (p. 122) (except for
DCR-SR32E/SR33E/SR42E).
FADER
D.EFFECT (Digital effect)
Fading out Fading in
PICT.EFFECT (Picture
effect)
MICREF LEVEL
SELF-TIMER
72
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder. Attach the external
flash to the Active Interface Shoe (p. 120).
B ON ( )
Flashes every time.
AUTO
Flashes automatically.
FLASH MODE
(DCR-SR52E/SR62E/
SR72E/SR82E)
73
Performing with a computer
Performing with a computer
What you can do with Windows computer
When you install the “Picture Motion
Browser” on a Windows computer from the
supplied CD-ROM, you can enjoy the
following operations.
b Notes
The supplied software is not compatible with a
Macintosh.
x Creating a DVD using the One
Touch Disc Burn function (p. 77)
You can save images recorded on the hard
disk of your camcorder on a DVD by
pressing DISC BURN button on your
Handycam Station (One Touch Disc Burn
function).
It is an simple operation to save images to
a DVD.
x Importing images recorded on the
hard disk of your camcorder to a
computer (p. 81)
You can import images recorded on the
hard disk of your camcorder to a computer
with a simple operation.
x Deleting images recorded on the
hard disk of your camcorder by a
computer (DCR-SR42E/SR62E/
SR82E/SR200E/SR300E) (p. 85)
You can delete images recorded on the
hard disk of your camcorder by using a
computer.
x Viewing images imported to a
computer (p. 86)
You can manage images recorded on the
hard disk of your camcorder by date, and
select images you want to view as
thumbnails.
These thumbnails can be enlarged and
played in a slide show.
x Creating a DVD with edited images
You can edit images imported to a
computer (p. 88).
You can create a DVD with selected
images (p. 90).
x Creating a DVD with movies
included in a Playlist on your
camcorder (p. 91)
You can save movies included in a Playlist
on your camcorder on a DVD with a
simple operation.
x Copying a DVD
t Video Disc Copier (p. 92)
You can copy a DVD you created as it is.
The Help guide explains all the functions of
all the software applications. Refer to the
Help guide for further detailed operations
after reading this Handbook thoroughly.
To display the Help guide, click the
mark on the screen.
Main functions
About the help function of the
software
74
System requirements
OS: Microsoft Windows 2000 Professional,
Windows XP Home Edition, Windows XP
Professional, or Windows XP Media
Center Edition
Standard installation is required.
Operation is not assured if the above OS
has been upgraded or in a multi-boot
environment.
CPU: Intel Pentium III 1 GHz or faster
Application: DirectX 9.0c or later (This
product is based on DirectX technology. It
is necessary to have DirectX installed.)
Sound system: Direct Sound compatible
sound card
Memory: 256 MB or more
Hard disk: Available free hard disk space for
installation required: Approximately
600 MB (for creating a DVD, 5 GB or
more may be required)
Display: DirectX 7 or later-compatible video
card, Minimum 1024 × 768 dots, High
Color (16 bit color)
Others: USB port (this must be provided
as standard), DVD burner (CD-ROM drive
is necessary for installation)
OS: Microsoft Windows 2000 Professional,
Windows XP Home Edition, Windows XP
Professional or Windows XP Media Center
Edition
Standard installation is required.
Operation is not assured if the above OS
has been upgraded.
CPU: MMX Pentium 200 MHz or faster
Others: USB port (this must be provided
as standard)
b Notes
Even in a computer environment where the
operations are guaranteed, frames may be
dropped from movies, resulting in uneven
playback. However, imported images and
images on a DVD created subsequently will not
be affected.
Operations are not guaranteed, even on
computers fulfilling the above system
requirements.
Picture Motion Browser does not support 5.1ch
surround sound reproduction. The sound is
reproduced in 2ch sound.
If you use a Notebook computer, connect it to
the AC Adaptor as the power source. Otherwise,
the software will not work properly due to the
power saving function of the computer.
z Tips
If your computer has a Memory Stick slot, insert
the “Memory Stick Duo” on which still images
are recorded into the Memory Stick Duo
Adaptor (optional), then insert it into the
Memory Stick slot on your computer to import
still images to the computer.
When using a “Memory Stick PRO Duo” and
your computer is not compatible with it, connect
your camcorder with the USB cable instead of
using the Memory Stick slot on the computer.
Use a special caution for preventing
damages and malfunctions of the
camcorder
When connecting your camcorder with the USB
cable or other cable, make sure you insert the
connector in the correct direction. Do not insert
the connector forcibly as it may damage the
cable or your camcorder.
Be sure to use the supplied software when
operating images recorded on the camcorder
through a computer.
On screenshots
The screenshots are from Windows XP. The
scenes may vary depending on the operating
system of the computer.
On screenshots in this Handbook, the
application for English version is used. When
you install the application, you can select other
language (p. 75).
When using Picture Motion Browser
When playing still images recorded
on a “Memory Stick Duo” with a
computer
75
Performing with a computer
Installing the software
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first
time.
Provide the camcorder and the Handycam
Station, and a USB cable beforehand.
Contents to be installed and procedures
may differ depending on your OS.
1 Confirm that your camcorder is
not connected to the computer.
2 Turn on the computer.
b Notes
Log on as Administrators for installation.
Close all applications running on the computer
before installing the software.
3 Place the supplied CD-ROM in the
disc drive of your computer.
The installation screen appears.
If the screen does not appear
1 Click [Start], then click [My
Computer]. (For Windows 2000,
double-click [My Computer].)
2 Double-click [SONYPICTUTIL (E:)]
(CD-ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
4 Click [Install].
5 Select the language for the
application to be installed, then
click [Next].
6 Check your area and country/
region, then click [Next].
b Notes
The software is set up for your selected country/
region.
7 Read [License Agreement], select
[I accept the terms of the license
agreement] when you agree, then
click [Next].
8 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
9 Connect the Handycam Station to
your computer using the supplied
USB cable, then click [Next] on
the connection confirmation
screen.
Even if a screen prompting you to
restart your computer appears, you do
not need to restart it at this time. Restart
your computer after completing the
installation.
76
10
Follow the on-screen instructions
to install the software.
Depending on the computer, you may
need to install third party software
(shown below). If the installation screen
appears, follow the instructions to
install the required software.
x Windows Media Format 9 Series
Runtime (Windows 2000 only)
Software required to create a DVD
x Microsoft DirectX 9.0c
Software required to handle movies
Restart the computer if required to
complete the installation.
The short-cut icons, such as [ ] (Picture
Motion Browser), appear on the desktop.
11
Remove the CD-ROM from the
disc drive of your computer.
z Tips
For disconnecting the USB cable, see page 79.
After you install the software,
a shortcut icon for the
customers registration website
is created on the desktop.
Once you register on the website, you
can get secure and useful customer
support.
http://www.sony.net/registration/di/
For the information about Picture
Motion Browser, visit the following
URL:
http://www.sony.net/support-disoft/
78
2 Turn on the computer.
3 Place the recordable DVD to be
saved in the DVD drive of your
computer.
z Tips
It is recommended that you use a new
recordable DVD.
If any software starts on the computer
automatically, close it.
4 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
5 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
z Tips
You can perform this operation, whichever
position of the (Movie)/ (Still) lamp is
lit.
6 Press DISC BURN button on the
Handycam Station.
7 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
b Notes
When connecting your camcorder to a
computer, make sure you insert the connector in
the correct direction. Do not insert the connector
forcibly as it may damage the cable, the
Handycam Station or your computer.
z Tips
Your camcorder is compatible with Hi-Speed
USB (USB 2.0). You can transfer data at a faster
rate using a computer compatible with Hi-Speed
USB (USB 2.0). When you connect a USB
interface not compatible with Hi-Speed USB
(USB 2.0), the data transfer ratio will be that of
USB 1.1 (USB Full-Speed).
80
After creating a DVD
After creating a DVD, check that the DVD can
be played back properly on a DVD player or
other devices.
When you cannot play back the DVD properly,
import the images to the computer by following
the steps on page 81.
Then save the data on a DVD, following the
instructions in “Creating and copying a DVD”
(p. 90).
If you check that the DVD can be played back
properly, it is recommended that you delete the
images from the camcorder using the functions
on the camcorder by following the steps on page
38. In this way, you can increase the free hard
disk space of your camcorder.
To copy a created DVD, use the supplied DVD
copy software (p. 92).
You cannot save the images on the hard disk of
your computer in this operation.
You cannot delete the images on the hard disk
of the camcorder in this operation.
You cannot edit the images on the created DVD
with a computer. When you want to edit the
images with the computer, import the images
onto the computer first (p. 81).
If DVD creation ends unexpectedly, the last
correctly saved file is completed. When you
create a DVD with the One Touch Disc Burn
function next time, the image data file that has
not yet been saved on the DVD will be the first
one to be saved.
The images that have been imported to a
computer using Easy PC Back-up, can be saved
on a DVD with the One Touch Disc Burn
function.
To perform [DISC BURN] on the [USB
SELECT] screen of your camcorder
1 Turn on the computer.
2 Place the recordable DVD to be saved in
the DVD drive of your computer.
3 Connect the Handycam Station to the
wall socket using the supplied AC
Adaptor.
4 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
5 Connect the (USB) jack of the
Handycam Station to a computer using
the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
6 Touch [DISC BURN] on the LCD
screen of your camcorder.
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
To perform [One Touch Disc Burn] on
the HDD Handycam Utility of a
computer
1 Turn on the computer.
2 Place the recordable DVD to be saved in
the DVD drive of your computer.
3 Connect the Handycam Station to the
wall socket using the supplied AC
Adaptor.
4 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
5 Connect the (USB) jack of the
Handycam Station to a computer using
the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
6 Touch [ COMPUTER] on the LCD
screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
81
Performing with a computer
7 Click [One Touch Disc Burn] in the
[HDD Handycam Utility] window on
the computer screen.
8 Click [Start].
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
To customize the settings of the DVD
drive used for creating a DVD
1 Click [Settings...] in step 7 in “To
perform [One Touch Disc Burn] on the
HDD Handycam Utility of a computer”.
ADrive settings
Select the drive you want to use to
create a DVD.
BLocation for temporary files
Specify a folder to be used to save
temporary files in the window
displayed when [Browse] is clicked.
CWriting speed
Select [Optimum Speed] for normal
usage. If DVD creation failure persists,
select lower speed.
2 Click [OK] when the setting is
completed.
Importing images to a
computer
You can view and edit images imported
from the camcorder to the computer. Also,
you can create a DVD with the imported
materials. To import images from the
camcorder, use [Easy PC Back-up], [Media
File Import], etc.
You can import images recorded on the
hard disk of your camcorder to a computer
with a simple operation using the Easy PC
Back-up function of the HDD Handycam
Utility. The images recorded on the hard
disk of your camcorder that have not yet
been imported to a computer can
automatically be imported to your
computer.
1 Turn on the computer.
2 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
3 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
4 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
Importing entire images to a
computer (Easy PC Back-up)
85
Performing with a computer
Deleting images recorded on the camcorder
through the computer (DCR-SR42E/SR62E/
SR82E/SR200E/SR300E)
You can delete images recorded on the
camcorder using Picture Motion Browser.
b Notes
This function is not available for DCR-SR32E/
SR33E/SR52E/SR72E/SR190E/SR290E.
You cannot restore images once they are
deleted.
You cannot delete images recorded on the
“Memory Stick Duo” using this function.
1 Turn on the computer.
2 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
3 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
4 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
5 Touch [ COMPUTER] on the
LCD screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
6 Click [Delete Media Files from
Handycam] in the [HDD
Handycam Utility] window on the
computer screen.
The image select window is displayed.
Movies and still images recorded on the
camcorder are displayed as thumbnails
on each tab.
AMovies
BStill images
7 To delete movies, click [Movies]
tab, or to delete still images, click
[Still images] tab.
8 Select the images you want to
delete.
Click the check box at the top left on the
thumbnails of movies and still images
you want to delete.
9 Click [Delete].
The deleting confirmation screen
appears.
10
Click [Yes].
z Tips
For disconnecting the USB cable, see page 79.
86
Viewing images imported to a computer
You can browse images imported to a
computer, sorted by registered folder
(Folder view), or sorted by the date and
time they were recorded (Calendar view).
1 Turn on the computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Click [Folders] or [Calendar] on
the Folder/Calendar switching
tab.
When you click [Folders], a list of
registered folders is displayed.
When you click [Calendar], the years
and months that have images are
displayed in a list on a calendar tree.
4 Click the folder, or click the year
and month of recording images
you want to view.
When you click the folder, thumbnails
of images stored in the selected folder
are listed.
When you click the year and month, a
calendar is displayed. In the date box of
the calendar, thumbnails of images
recorded on that date are displayed.
When you click the folder
When you click the month icon
z Tips
When you click the month on the yearly
calendar, the calendar switches to the selected
month.
When you click the date on a monthly calendar,
the calendar switches to a time calendar for the
selected date. Thumbnails of the images
recorded on that day are displayed, arranged
according to the hour they were recorded.
87
Performing with a computer
To enlarge an image
Double-click the thumbnail.
The view image window starts up and the
selected image is enlarged.
When you select a movie, the slider and the
playback control buttons appear and
playback starts.
When you select a still image
When you select a movie
To playback images continuously
You can playback images continuously as a
slide show. Here we explain the procedure
for starting a slide show by selecting
images in the Calendar view.
1 Turn on the computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Click [Calendar] on the Folder/Calendar
switching tab.
4 Click the date when the image you want
to view in the slide show is recorded.
A list of images recorded on the selected
date is displayed.
5 Select the images.
The selected images are marked with a
blue frame.
To select listed images in the image display
area on the main window, click the first
thumbnail, then press and hold down [Shift]
key and click the last thumbnail.
To select two or more random images, press
and hold down [Ctrl] key while clicking
thumbnails.
6 Click [ ].
The selected image is displayed full
screen, and a slide show starts.
If you move the mouse while the slide
show is playing, a setting bar for
controlling the playback is displayed
and you can control playback and adjust
the volume.
To delete unnecessary image from the
computer
1 Right-click the thumbnail of the image
you want to delete.
2 Click [Delete] t [Yes].
89
Performing with a computer
8 Click [Save] to save the edited
movie.
Saving takes some time. When the
saving is completed, a message is
displayed. Click [OK].
To capture still images from a movie
Click [Save Frame] in the Video Trimming
window to save the current frame as a still
image. The file of the still image is saved in
the same folder as the original movie.
z Tips
Still images are saved in high resolution. By
clicking [Settings] on the window displayed
after you click [Save Frame], you can adjust the
settings for noise reduction and color correction.
You can edit imported still images as
follows. For details about the operation,
refer to the Picture Motion Browser Help.
Automatic Correction
Automatically corrects the brightness
and contrast to the most suitable levels
for that image.
Correcting brightness and contrast
The brightness and contrast of still
images can be corrected. You can also
correct only dark or light areas.
Correcting saturation
Adjusts the saturation of images.
Adjusting sharpness
Emphasizes the outline of images.
Adjusting with the tone curve
The histogram and tone curve for the
channel being displayed in the drop-
down list are shown. You can adjust the
tone curve for each channel.
Red-eye Reduction
If the red-eye is caused by shooting a
person with flash, you can correct the
red-eye portion of the still image. You
can correct and remove the red-eye
portion of still images.
Trimming
You can edit still images and use only
the parts of the image you want.
Resizing
You can resize still images and save
them to the desired folder.
Changing the date and time stamp
You can change the date and time stamp
of still images in a batch.
Inserting date
You can insert a date stamp into still
images.
Editing still images
90
Creating and copying a DVD
You can create a DVD Video with a DVD
menu by putting images on your computer
as materials.
z Tips
The selected movies are written to the DVD as
they are. If there are unnecessary scenes in the
movie, edit it beforehand (p. 88).
1 Turn on the computer, and place
the recordable DVD to be saved in
the DVD drive of your computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Select the images you want to
write to the DVD in the Folder
view or Calendar view (p. 86).
You can select two or more images, or
select images by folder or date.
z Tips
To select listed images in the image display area
on the main window, click the first thumbnail,
then press and hold down [Shift] key and click
the last thumbnail.
To select two or more random images, press and
hold down [Ctrl] key while clicking thumbnails.
4 Select [DVD-Video Creation] in
the [Manipulate] menu.
The window used to select images is
displayed.
5 Confirm the images to write to the
DVD.
z Tips
Double-click a thumbnail to playback the
image.
To add images to the previously selected ones,
select the images you want to add in the image
display area on the main window and drag and
drop onto this window.
6 Click [Next].
Menu selection window of the DVD is
displayed.
7 Select menu design and a title
creation method, and enter the
DVD name.
Image of DVD video menu to create is
displayed.
Creating a DVD with selected
images
92
9 Confirm the movies to write to a
DVD.
The movies with checkmarks at the top
right are written on the DVD in the
Playlist order.
10
Click [Next].
The menu selection window of the DVD
is displayed.
11
Select a menu design and a title
creation method, and enter the
DVD name.
Image of DVD video menu to create is
displayed.
z Tips
Selecting [Menu Sorted by Date Taken] in the
Menu structure drop-down list automatically
changes the order of movies and still images
into the order of date on which they were
recorded.
Clicking [Font] lets you select the text color of
the DVD name and title, etc.
Clicking [Preview] lets you check the
completion image of the DVD video to create.
Clicking [Settings] lets you set the various
operations that take place upon the first play of a
DVD, movie quality, and display time for each
still image in slide show.
12
Click [Start].
DVD creation starts.
z Tips
You can choose to create more copies of the
same DVD after writing to the DVD is
completed.
You can copy the images recorded on a
DVD to another DVD.
You can also back up a DVD.
This procedure describes how to copy the
images recorded on a DVD-RW (12 cm) to
a DVD-R (12 cm) in the DVD drive of your
computer.
1 Turn on the computer.
2 Insert a recorded DVD into the
DVD drive of your computer.
3 Click [Start] t [All Programs] (for
Windows 2000, click [Programs])
t [Sony Picture Utility] t [Video
Disc Copier] on your computer.
Disc copy window is displayed.
4 Select a DVD drive for [Source:]
and [Copy to:].
The status of the drive and DVD is
displayed. Depending on the status,
copying cannot start. Follow the
instruction to change the DVD.
Obtaining information from a DVD of
your computer takes time. Wait until the
DVD information is displayed in the
window.
Copying a DVD
102
The playback screen is paused or
distorted.
Check the recommended computer
environment required to play movies.
The actual displayed screen or
message is different from that
shown in this Handbook.
The screen or message may be different.
The extension of a file is not
displayed on your computer.
To display the extension, follow the steps
below:
1 Click [Tool] in the window folder t
[Folder option...] t [View] tab.
2 Remove the check mark from the [Hide
file extensions for known file types]
under Advanced Settings.
3 Click [OK].
While performing Easy PC Back-up,
[Not enough space on destination
hard disk.] is displayed on the
computer screen.
Delete unnecessary files from your
computer to free hard disk space.
The following list shows examples of
unworkable combinations of functions and
menu items.
Functions that cannot be used
simultaneously
Cannot use
Because of following
settings
BACK LIGHT [FIREWORKS] in
[SCENE SELECTION],
[MANUAL] in
[EXPOSURE], [SPOT
METER]
WIDE
SELECT*
1
[OLD MOVIE]
[WIDE
SELECT]*
2
[OLD MOVIE]
[STEADY
SHOT]*
3
[SMTH SLW REC]
[AUTO SLW
SHUTTR]
[S. NIGHTSHOT
PLS]*
4
, [SUPER
NIGHTSHOT]*
5
,
[COLOR SLOW SHTR],
[D.EFFECT], [SCENE
SELECTION], [SMTH
SLW REC]*
5
[SPOT FOCUS] [SCENE SELECTION]
[TELE
MACRO]
[SCENE SELECTION]
[EXPOSURE] NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
[SPOT METER] NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-SR52E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-SR52E in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-SR52E

Sony DCR-SR52E User Manual - Dutch, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info