107448
98
Zoom out
Zoom in
Previous page
1/131
Next page
98
The recording stops.
The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off the camcorder and
take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
There is a time difference between
the point where you press START/
STOP and the point that the
recorded movie starts/stops.
On your camcorder, there may be a slight
time difference between the point where
you press START/STOP and the actual
point that recording movie starts/stops.
This is not a malfunction.
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 67).
The recording conditions are not suitable
for auto focus. Adjust the focus manually
(p. 67).
[STEADYSHOT] does not function.
Set [STEADYSHOT] to [ON] (p. 55).
[STEADYSHOT] may not be able to
compensate for excessive vibrations.
The BACK LIGHT function does not
function.
The BACK LIGHT function cannot be
used during Easy Handycam operation.
The subjects passing by the frame
very fast appear crooked (DCR-
SR190E/SR200E/SR290E/SR300E).
This is called the focal plane phenomenon.
This is not a malfunction. Because of the
way the image device (CMOS sensor)
reads out image signals, the subjects
passing by the frame rapidly might appear
crooked depending on the recording
conditions.
Tiny spots in white, red, blue, or
green appear on the screen.
The spots appear when you are recording
with [S. NIGHTSHOT PLS] (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E), [SUPER NIGHTSHOT]
(DCR-SR190E/SR200E/SR290E/
SR300E) or [COLOR SLOW SHTR]. This
is not a malfunction.
The color of the image is not
correctly displayed.
Set the NIGHTSHOT PLUS switch (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E) or NIGHTSHOT switch
(DCR-SR190E/SR200E/SR290E/
SR300E) to OFF (p. 27).
The screen image is bright, and the
subject does not appear on the
screen.
Set the NIGHTSHOT PLUS switch (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E) or NIGHTSHOT switch
(DCR-SR190E/SR200E/SR290E/
SR300E) to OFF (p. 27).
The screen image is dark, and the
subject does not appear on the
screen.
Press and hold DISP/BATT INFO for a
few seconds to turn on the backlight
(p. 19).
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-SR32E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-SR32E in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-SR32E

Sony DCR-SR32E User Manual - Dutch, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info