291200
136
Zoom out
Zoom in
Previous page
1/192
Next page
136
Changing the menu settings
Notes on the LP mode
When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your
camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.
When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV cassette
so that you can get the most out of your camcorder.
You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode for the tape to
be audio dubbed.
When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the
playback picture may be distorted or the time code may not be written properly between scenes.
Notes on AUDIO MODE
You cannot dub audio sound on a tape recorded in the 16-bit mode.
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.
Notes on DEMO MODE
You cannot select DEMO MODE when a cassette is inserted in your camcorder.
DEMO MODE is set to STBY (Standby) at the default setting and the demonstration starts about 10
minutes after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than CAMERA, or set
DEMO MODE to OFF. To set to STBY (Standby) again, leave the DEMO MODE at ON in the menu
settings, turn the POWER switch OFF (CHARGE), and return the POWER switch to CAMERA.
If you press the touch panel during the demonstration, the demonstration stops for a while, then it
starts again after about 10 minutes.
When NIGHTSHOT is set to ON, the NIGHTSHOT indicator appears on the screen and you cannot
select DEMO MODE in the menu settings.
Icon/item
TAPE SET
REC MODE
AUDIO MODE
qREMAIN
SETUP MENU
CLOCK SET
DEMO MODE
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
——
z ON
OFF
Meaning
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record in the 12-bit mode (two stereo sounds)
To record in the 16-bit mode (the one stereo sound
with high quality)
To display the remaining tape bar:
for about 8 seconds after your camcorder is turned
on and calculates the remaining amount of tape
for about 8 seconds after a cassette is inserted and
your camcorder calculates the remaining amount
of tape
for about 8 seconds after the playback button
is pressed in VCR mode
for about 8 seconds after DISPLAY/TOUCH
PANEL is pressed to display the screen indicators
To always display the remaining tape indicator
To reset the date or time (p. 24)
To make the demonstration appear
To cancel the demonstration mode
POWER
switch
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
CAMERA
CAMERA
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony dcr-pc 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony dcr-pc 8 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info