107421
90
Zoom out
Zoom in
Previous page
1/124
Next page
90
Troubleshooting (Continued)
The ACCESS lamp lights up even
when you stop recording.
Your camcorder is recording the scene you
have just shot on the disc.
The recording angle looks different.
The recording angle may look different
depending on the mode of your camcorder.
This is not a malfunction.
The flash does not work.
You cannot record with the flash with:
– Capturing still images while shooting a
movie
– The conversion lens (optional) attached
Even if auto flash or (Auto redeye
reduction) is selected, you cannot use the
flash with:
– NightShot
– [SUPER NIGHTSHOT]
– [TWILIGHT], [CANDLE],
[SUNRISE&SUNSET], [FIREWORKS],
[LANDSCAPE], [SPOTLIGHT],
[BEACH] or [SNOW] in [SCENE
SELECTION]
– [MANUAL] in [EXPOSURE]
–[SPOT METER]
The actual recording time for movie
is less than the expected
approximate recording time of a
disc.
Depending on an object, such as a fast
moving object, the time available for
recording may shorten (p. 12).
The recording stops.
The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
Moisture condensation has occurred with the
disc. Turn off your camcorder and leave it
about 1 hour in a cool place (p. 106).
There is a time difference between
the point where you press START/
STOP and the point that the
recorded movie starts/stops.
On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
The movie aspect ratio (16:9/4:3)
cannot be changed.
You cannot change the movie aspect ratio if
your disc is DVD+RW.
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 76).
The recording conditions are not suitable for
auto focus. Adjust the focus manually
(p. 76).
[STEADYSHOT] does not function.
Set [STEADYSHOT] to [ON] (p. 65).
[STEADYSHOT] may not be able to
compensate for excessive vibrations.
The BACK LIGHT function does not
function.
The BACK LIGHT function cannot be used
during Easy Handycam operation.
The subjects passing by the frame
very fast appear crooked.
This is called the focal plane phenomenon.
This is not a malfunction. Because of the
way the image device (CMOS sensor) reads
out image signals, the subjects passing by
the frame rapidly might appear crooked
depending on the recording conditions.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-DVD406E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-DVD406E in the language / languages: English as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-DVD406E

Sony DCR-DVD406E User Manual - German - 128 pages

Sony DCR-DVD406E User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info