107421
35
Zoom out
Zoom in
Previous page
1/124
Next page
35
Recording/Playback
Press (flash) repeatedly to select an
appropriate setting.
No indication (Auto flash): Automatically
flashes when there is insufficient ambient
light.
r
(Forced flash): Always uses the flash
regardless of the surrounding brightness.
r
(No flash): Records without flash.
b Notes
The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
The flash charge lamp flickers while charging
the flash, and remains lit when the battery
charge is complete.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
When attaching a conversion lens (optional) or a
filter (optional) to your camcorder, the flash
light does not emit light.
z Tips
You can change the brightness of the flash by
setting [FLASH LEVEL] (p. 65), or you can
prevent the redeye by setting [REDEYE
REDUC] (p. 66).
You can record high quality still images on
the “Memory Stick Duo” while recording a
movie on the disc.
1 Set the POWER switch to (Movie),
and press START/STOP to start movie
recording.
2 Press PHOTO fully.
After you start recording, and before you
finish, you can capture up to 3 frames of
still images from your movie.
3 Press START/STOP to stop movie
recording.
Stored still images appear one by one, and
the images are stored onto the “Memory
Stick Duo.” When disappears, the
image has been recorded.
b Notes
Do not eject the “Memory Stick Duo” before
recording is finished and the still images are
stored on the “Memory Stick Duo.”
You cannot use the flash during Dual Rec.
z Tips
When the POWER switch is set to
(Movie), the size of still images becomes
4.6M (16:9 wide) or 3.4M (4:3) (DCR-
DVD506E/DVD508E/DVD908E).
When the POWER switch is set to
(Movie), the size of still images becomes
2.3M (16:9 wide) or 1.7M (4:3) (DCR-
DVD406E/DVD408E/DVD808E).
You can record still images during recording
standby in the same way as when the POWER
switch is set to (Still). You can also record
with the flash.
Recording high quality still
images during movie recording
(Dual Rec)
Orange color
boxes indicate the
number of
recorded images.
When recording is
finished, the color
changes to orange.
Continued ,
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-DVD406E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-DVD406E in the language / languages: English as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-DVD406E

Sony DCR-DVD406E User Manual - German - 128 pages

Sony DCR-DVD406E User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info