291949
135
Zoom out
Zoom in
Previous page
1/148
Next page
135
Additional Information
x How to prevent moisture condensation
When you bring your camcorder from a cold
place into a warm place, put your camcorder
in a plastic bag and seal it tightly. Remove
the bag when the air temperature inside the
plastic bag has reached the surrounding
temperature (after about one hour).
On the LCD screen
Do not exert excessive pressure on the LCD
screen. Blurs appear and it may cause a
malfunction of your camcorder.
If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
While you are using your camcorder, the back of
the LCD screen may heat up. This is not a
malfunction.
x To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, use the cleaning cloth (supplied) to
clean the LCD screen.
When you use the LCD Cleaning Kit
(optional), do not apply the cleaning liquid
directly to the LCD screen. Use cleaning
paper moistened with the liquid.
x On adjustment of the LCD screen
(CALIBRATION)
The buttons on the touch panel may not work
correctly. If this happens, follow the
procedure below. It is recommended you
connect your camcorder to the wall socket
using the supplied AC Adaptor during the
operation.
1 Slide the POWER switch to turn on your
camcorder and press PLAY/EDIT.
2 Disconnect cables other than that of the AC
Adaptor from your camcorder, then remove
the disc and “Memory Stick Duo” from your
camcorder.
3 Touch t [SETUP] t
STANDARD SET t [CALIBRATION].
4 Touch the “× displayed on the screen with
a thin object such as a corner of “Memory
Stick Duo
”.
The position of the “×” changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the
calibration again.
Do not use a sharp-pointed tool to calibrate the
LCD screen. Doing so may damage the surface
of the screen.
You cannot calibrate the LCD screen if you have
rotated it, or if you have set it with the LCD screen
side facing out.
On handling the casing
If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water, and
then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the finish.
Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
Handling with above substances on your hands.
Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
CALIBRATION
Touch the "x"
1/3
CANCEL
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony dcr dvd 505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony dcr dvd 505 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony dcr dvd 505

Sony dcr dvd 505 User Manual - German, Dutch - 292 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info