19086

Sony DAVD150G Manual

26
Zoom out
Zoom in
Previous page
1/48
Next page
26
GB
VIDEO Operation (Continued)
VIDEO Plus+
®
System recording
VIDEO Plus+ System greatly simplifies entering the
date, channel, start and end times of a Timer recording
by simply entering a PlusCode programming number.
The PlusCode programming numbers are published in
most TV guide magazines; they can vary from one to
nine numbers in length.
11
Make sure that TV channels have been tuned
and stored.
Insert a video cassette with protection tab into
your DVD/VIDEO receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
22
Press VIDEO PLUS.
33
Press
DD
or
EE
to select the recording type.
ONCE: To record once.
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
44
Press the numerical buttons to enter the
PlusCode programming number of the TV
programme that you wish to record.
If you make a mistake press F then enter the revised
number.
55
Press ENTER (OK).
The recording details of your programme will be
displayed.
If PLEASE CHECK is displayed it means that you have
entered the wrong PlusCode programming number,
entered the PlusCode programming number incorrectly or
the PlusCode programming number has been printed
incorrectly in the TV guide. If “- -” is displayed in “PR”, you
have to enter the programme number of the station you
want to record from.
If you want to record from either of the SCART
sockets or AV3 on the front, repeatedly press
INPUT SELECT for the correct display (AV1, AV2
or AV3).
66
Press
GG
and press
DD
or
EE
to switch PDC on or
off.
If you are recording from stations that do not broadcast PDC
switch PDC off! ( * symbol will disappear on the TV screen).
Remember only certain stations transmit PDC.
77
Press
GG
to select the recording speed and press
DD
or
EE
if you wish to record in SP, IP or LP.
SP will produce improved picture and sound quality, how-
ever LP will provide twice as much recording time as SP.
88
Check that the timer event details are correct.
Press MENU (i) to save your settings.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
9
Press MENU (i) to remove the menus.
If you want to make other VIDEO Plus+ system
recordings repeat stages 2 - 8.
1100
Press @ / 1 to switch your unit to Standby.
TIMER will appear in the DVD/VIDEO receiver’s
display while your DVD/VIDEO receiver waits to
make the recording.
If the DVD/VIDEO receiver is DVD mode, even with
the DVD/VIDEO receiver is power on, it will record
any timer programme. You can clear the recording
by pressing STOP during programmed recording.
Intelligent LP Recording
When you set the tape speed to “IP”, the DVD/VIDEO
receiver automatically switches to LP mode to allow
complete recording if there is not enough tape to record
the entire programme while timer- recording in SP
mode.
It is not possible to set the tape speed to “IP” with
“PDC” set to “ON”.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DAVD150G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DAVD150G in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info