6508
16
Zoom out
Zoom in
Previous page
1/536
Next page
16
– Very humid.
– Subject to vibration.
– Subject to direct sunlight.
Do not connect any speakers other than those supplied
with this system.
Use caution when placing the speakers and/or speaker
stands (not supplied) attached to the speakers on a
specially treated floor (waxed, oiled, polished, etc.), as
staining or discoloration may result.
Cover the floor with a cloth when connecting.
Be sure to match the speaker cord polarity with the
component terminals: 3 to 3 (grey), # to # (black).
If reversed, the sound will lack bass and may be
distorted.
Notes on speaker cord treatment
Do not insert the speaker cord insulation in the
speaker terminals. Bend the stripped cord at the
insulation before connecting.
To avoid short-circuiting the speakers, make
sure speaker cord conductors do not touch the
neighbouring conductors or terminal.
Example:
After connecting the system components and the
mains leads, you can check for a speaker short-
circuit using the test tone (page 102). If the test
tone is not output, or is output from a speaker other
than indicated in the front panel display, check the
speaker connection.
Note
If you connect the speakers incorrectly, or turn up the
volume while the speakers are short-circuited, the
POWER indicator on the subwoofer flashes and the
system enters standby mode. If this happens, disconnect
the mains lead, wait about two minutes, and then
reconnect to turn on the system.
Positioning the speakers
For the best possible surround sound, all speakers
other than the subwoofer should be the same
distance from the listening position (A).
However, this system allows you to place the
centre speaker up to 1.6 m closer (B) and the
surround speakers up to 4.6 m closer (C) to the
listening position.
The front speakers can be placed from 1.0 to 7.0 m
(A) from the listening position.
Notes
Do not place the centre speaker and surround speakers
farther away from the listening position than the front
speakers.
If you change the speaker positions after Easy Setup
(page 34), change the “Distance” and “Size” settings in
“Speaker” setup accordingly (page 100).
Note on subwoofer placement
If the subwoofer is placed too close to a CRT TV
or projector, magnetic leakage may interfere with
the video signals and cause colour irregularity.
Should this happen, turn off the TV or the
projector, wait for 15 to 30 minutes, and then turn
it on again. If the problem persists, try the
following:
Position the subwoofer at least 0.3 m away from
the TV or the projector.
– Move any nearby magnetic object away from the
subwoofer (healthcare devices, toys, etc.).
Magnetic latches on TV stands may also cause a
problem.
Too much insulation is
removed. Conductors are
touching each other.
Conductors are splayed, and
touching neighbouring
terminal.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DAR-RH1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DAR-RH1000 in the language / languages: Polish, Spanish as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DAR-RH1000

Sony DAR-RH1000 User Manual - English - 128 pages

Sony DAR-RH1000 User Manual - German, Dutch, French - 552 pages

Sony DAR-RH1000 User Manual - Portuguese - 388 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info