104849
49
Zoom out
Zoom in
Previous page
1/108
Next page
filename[C:\Documents and Settings\Manual\My Documents\_upload job\307435115DSC71PUC\01COV-
DSCP31UC\010COV01.FM] masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-15(1)]
3-074-351-15(1)
Digital Still Camera
Operating Instructions
Before operating the unit, please read this manual thoroughly, and
retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DSC-P71/P51/P31
Serial No.
DSC-P71/P51/P31
© 2002 Sony Corporation
Getting started _________________________
Shooting still images ___________________
Viewing still images ____________________
Deleting still images____________________
Copying still images to your computer
__________
Before advanced operations ______________
Advanced still image shooting_____________
Advanced still image viewing______________
Still image editting ____________________
Enjoying movies_________________________
Troubleshooting_________________________
Additional information ____________________
Index
2
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\02WAR.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
If you have any questions about this product,
you may call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related
matters only.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
WARNING
For the Customers in the U.S.A.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-P71
Responsible Party:Sony Electronics Inc.
Address: 680 Kinderkamack
Road, Oradell, NJ
07649 USA
Telephone No.: 201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-P51, DSC-P31
Responsible Party:Sony Electronics Inc.
Address: 680 Kinderkamack
Road, Oradell, NJ
07649 USA
Telephone No.: 201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
01cov.book Page 2 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\02WAR.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
3
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
RECYCLING NICKEL METAL
HYDRIDE BATTERIES
Nickel Metal Hydride batteries
are recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to the
collection and recycling location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or
visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Nickel Metal Hydride batteries.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or
BSI to BS 1362, (i.e. marked with or
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact your
nearest Sony service station.
Directive:EMC Directive 89/336/EEC,
92/31/EEC
This equipment complies with the EMC
regulations when used under the following
circumstances:
Residential area
Business district
Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
For the Customers in the U.S.A.
and Canada NOTICE FOR THE
CUSTOMERS IN THE UNITED
KINGDOM
For the Customers in Germany
01cov.book Page 3 Wednesday, May 22, 2002 3:40 PM
4
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\02WAR.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
This product has been tested and found
compliant with the limits sets out on the EMC
Directive for using connection cables shorter
than 3 meters.
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this camera.
For the Customers in the U.S.A.
and Canada
THIS CLASS B DIGITAL DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES AND THE CANADIAN ICES-003
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail),
restart the application or disconnect and
connect the USB cable again.
Trademarks
“Memory Stick, , “MagicGate Memory
Stick,” and , are trademarks of Sony
Corporation.
“MagicGate” and are
trademarks of Sony Corporation.
Microsoft and Windows are registered
trademarks of the U.S. Microsoft Corporation
in the United States and other countries.
Macintosh, Mac OS, and QuickTime, are
trademarks or registered trademarks of Apple
Computer, Inc.
In addition, system and product names used in
this manual are, in general, trademarks or
registered trademarks of their respective
developers or manufacturers. However, the ™
or ® marks are not used in all cases in this
manual.
Attention for the Customers in
Europe
Attention
“Memory Stick
N50
Notice
01cov.book Page 4 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\02WAR.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
5
Before using your camera
Trial recording
Before you record one-time events, you may
want to make a trial recording to make sure
that the camera is working correctly.
No compensation for contents of the
recording
Contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera or recording medium, etc.
Notes on image data compatibility
This camera conforms with the Design Rules
for Camera File Systems universal standard
established by the JEITA (Japan Electronics
and Information Technology Industries
Association).
Playback of images recorded with your
camera on other equipment and playback of
images recorded or edited with other
equipment on your camera are not
guaranteed.
Precaution on copyright
Television programs, films, video tapes, and
other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to the provision of the copyright
laws.
Do not shake or strike the camera
In addition to malfunctions and inability to
record images, this may render the “Memory
Stick” unusable or image data breakdown,
damage or loss may occur.
LCD screen, LCD finder (only models
with a LCD finder) and lens
The LCD screen and the LCD finder are
manufactured using extremely high-
precision technology so over 99.99% of the
pixels are operational for effective use.
However, there may be some tiny black
points and/or bright points (white, red, blue
or green in color) that constantly appear on
the LCD screen and the LCD finder. These
points are normal in the manufacturing
process and do not affect the recording in
any way.
Be careful when placing the camera near a
window or outdoors. Exposing the LCD
screen, the finder or the lens to direct
sunlight for long periods may cause
malfunctions.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to get
the camera wet. If moisture condensation
occurs, see page 99 and follow the
instructions on how to remove it before using
the camera.
The auto zoom lens (for the DSC-P71
only)
This camera is equipped with an auto zoom lens.
Be careful not to bump the lens, and be careful
not to apply force to it.
On illustrations
Illustrations used in this manual are of the DSC-
P71 unless noted otherwise.
The pictures used in this manual
The photographs used as examples of pictures in
this manual are reproduced images, and are not
actual images shot using this camera.
Do not aim the camera at the sun or
other bright light
This may cause irrecoverable damage to your
eyes.
Back up recommendation
To avoid the potential risk of data loss, always
copy (back up) data to a disk.
01cov.book Page 5 Wednesday, May 22, 2002 3:40 PM
6
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\01covTOC.fm]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Table of contents
Before using your camera.........................5
Identifying the parts..................................8
Preparing batteries ..................................14
Charging the batteries.............................14
Inserting the batteries..............................17
Using an external power source..............19
Using your camera abroad......................19
Turning on/off your camera....................20
How to use the control button.................20
Setting the date and time.........................21
Inserting and removing a
“Memory Stick” .............................23
Deciding the still image size and
quality.............................................24
Basic still image shooting (using auto
adjustment mode)...........................26
Checking the last shot image (Quick
Review) ..........................................27
Using the zoom feature.......................28
Shooting close-ups (Macro)
(DSC-P71 only)..............................28
Using the self-timer ............................29
Selecting a flash mode........................30
Shooting with the finder .....................32
Shooting with the date and time
inserted........................................... 32
Shooting according to scene conditions
(SCENE SELECTION) ................. 34
Viewing images on the LCD screen of your
camera............................................ 36
Viewing single images....................... 36
Viewing Index
(nine- or triple-image display) ....... 37
Viewing images on a TV screen............. 38
Deleting images...................................... 39
Deleting on the Index (nine-image)
screen ............................................. 40
Deleting on the Index (triple-image)
screen ............................................. 41
Formatting a “Memory Stick................ 43
Copying still images to your computer...44
1 Installing the USB driver ..................45
2 Preparing your camera ......................46
3 Connecting your camera to your
computer ........................................47
4 Copying images ................................48
When a removable disk icon is not
shown..............................................49
Copying images
(for Windows XP users) ................49
Image file storage destinations and file
names..............................................51
5 Viewing the images on your
computer.........................................53
For Macintosh users................................54
Getting started
Shooting still images
Viewing still images
Deleting still images
Copying still images to your
computer
01cov.book Page 6 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\01covTOC.fm]
masterpage:L1-Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
7
How to setup and operate your camera...55
Changing menu settings......................55
Changing items in the SET UP
screen..............................................55
Adjusting the exposure (EV adjustment) 56
Adjusting color tones
(WHITE BALANCE).....................57
Choosing a focus method
(MULTI AF/CENTER AF)............58
Setting the distance to the subject
(Focus preset) .................................60
Adding special effects (P. EFFECT).......60
Spot light-metering..................................61
Shooting multiple frames
(CLIP MOTION)............................62
Shooting in Multi Burst mode
(MULTI BURST)...........................64
Shooting still images for e-mail
(E-MAIL)........................................65
Enlarging a portion of a still image ........ 66
Enlarging an image – Playback zoom 66
Recording an enlarged image –
Trimming........................................ 67
Playing back successive images
(SLIDE SHOW).............................67
Rotating still images (ROTATE)............68
Protecting images (PROTECT).............. 69
For single images................................69
For Index (nine-image) screen............ 69
For Index (triple-image) screen.......... 70
Changing image size (RESIZE).............. 71
Choosing images to print (PRINT)......... 72
For single images................................72
For index (nine-image) screen............ 72
For index (triple-image) screen..........73
Shooting movies ..................................... 74
Viewing movies on the LCD screen.......75
Deleting movies...................................... 76
Deleting on the single screen..............76
Deleting on the Index (nine-image)
screen.............................................. 76
Deleting on the Index (triple-image)
screen ..............................................77
Editing movies.........................................78
Cutting movies....................................78
Deleting unnecessary portions of a
movie ..............................................79
Copying movies to your computer..........80
For Windows 98, 98SE, 2000, Me
users ................................................80
For Windows XP users .......................80
For Macintosh users............................81
Troubleshooting ......................................82
Warnings and messages ..........................89
Self-Diagnostics Display.........................90
The number of images that can be saved/
shooting time...................................91
Menu items..............................................92
SET UP items..........................................97
Precautions ..............................................99
The “Memory Stick .............................100
The nickel hydride batteries..................100
Specifications ........................................101
The LCD screen ....................................103
Index......................................................106
Before advanced operations
Advanced still image
shooting
Advanced still image viewing
Still image editting
Enjoying movies
Troubleshooting
Additional information
01cov.book Page 7 Wednesday, May 22, 2002 3:40 PM
8
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Identifying the parts (DSC-P71)
APOWER ON/OFF lamp (20)
BPOWER button (20)
CShutter button (26)
DFlash (30)
ESelf-timer lamp (29)/
AF illuminator (31, 97)
FFinder window
GLens
HTripod receptacle (bottom
surface)
Use a tripod with a screw length of less than
5.5mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
longer screws, and may damage the camera.
6
7
8
1
2
3
4
5
Attaching
the strap
01cov.book Page 8 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
9
AFinder
BDISPLAY/LCD ON/OFF button
(32)
CMENU button (24)
DVIDEO OUT jack (38)
EJack cover
FUSB jack (47)
GControl button
(Menu on) (v/V/b/B/z) (20)/
(Menu off) ( / /7/) (27, 29, 30)
HRESET button (bottom surface)
(82)
ILCD screen
JDC IN jack cover (19)
KDC IN jack (19)
LMode dial (21)
: To shoot still images
: To view or edit images
: To shoot movies /Clip Motion
images/Multi Burst mode images
SET UP: To set the SET UP items
SCN: To shoot in the SCENE
SELECTION mode
MZoom button (for shooting) (28)/
Index button (for viewing) (37)
NWrist strap hook
OOpen lever
PBattery cover
Q“Memory Stick” cover
RAccess lamp (23)
qh
qj
qg
q
k
qd
qf
q
s
1
2
3
4
5
6
7
8
9
q;
qa
Self-timer/recording
lamp (red)
AE/AF lock lamp
(green)
Flash charge lamp
(orange) (30)
01cov.book Page 9 Wednesday, May 22, 2002 3:40 PM
10
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Identifying the parts (continued) (DSC-P51)
APOWER ON/OFF lamp (20)
BPOWER button (20)
CShutter button (26)
DFlash (30)
ESelf-timer lamp (29)/
AF illuminator (31, 97)
FFinder window
GLens
HTripod receptacle (bottom
surface)
Use a tripod with a screw length of less than
5.5mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
longer screws, and may damage the camera.
6
7
8
1
2
3
4
5
Attaching
the strap
01cov.book Page 10 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
11
APOWER SAVE switch
BDISPLAY/LCD ON/OFF button
(32)
CFinder
DMENU button (24)
EVIDEO OUT jack (38)
FJack cover
GUSB jack (47)
HControl button
(Menu on) (v/V/b/B/z) (20)/
(Menu off) ( / /7/) (27, 29,
30, 61)
IRESET button (buttom surface)
(82)
JLCD screen
KDC IN jack cover (19)
LMode dial (21)
: To shoot still images
: To view or edit images
: To shoot movies /Clip Motion
images/Multi Burst mode images
SET UP: To set the SET UP items
SCN: To shoot in the SCENE
SELECTION mode
MZoom button (for shooting) (28)/
Index button (for viewing) (37)
NWrist strap hook
OOpen lever
PBattery cover
Q“Memory Stick” cover
RAccess lamp (23)
SDC IN jack (19)
qh
q
l
qj
qg
qf
qk
qd
qs
2
1
3
4
5
6
7
8
9
q;
q
a
S
elf-timer
/
recording
lamp (red)
AE/AF lock lamp
(green)
Flash charge lamp
(orange) (30)
01cov.book Page 11 Wednesday, May 22, 2002 3:40 PM
12
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Identifying the parts (continued) (DSC-P31)
APOWER ON/OFF lamp (20)
BPOWER button (20)
CShutter button (26)
DFlash (30)
ESelf-timer lamp (29)/
AF illuminator (31, 97)
FFinder window
GLens
HTripod receptacle (bottom
surface)
Use a tripod with a screw length of less than
5.5mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
longer screws, and may damage the camera.
5
6
7
8
1
2
3
4
Attaching
the strap
01cov.book Page 12 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\03BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
13
APOWER SAVE switch
BDISPLAY/LCD ON/OFF button
(32)
CFinder
DMENU button (24)
EJack cover
FUSB jack (47)
GVIDEO OUT jack (38)
HControl button
(Menu on) (v/V/b/B/z) (20)/
(Menu off) ( / /7/) (27, 29,
30, 61)
IRESET button (buttom surface)
(82)
JLCD screen
KDC IN jack cover (19)
LMode dial (21)
: To shoot still images
: To view or edit images
: To shoot movies /Clip Motion
images/Multi Burst mode images
SET UP: To set the SET UP items
SCN: To shoot in the SCENE
SELECTION mode
MZoom button (for shooting) (28)/
Index button (for viewing) (37)
NWrist strap hook
OOpen lever
PBattery cover
Q“Memory Stick” cover
RAccess lamp (23)
SDC IN jack (19)
qh
q
l
qj
qg
qf
qk
qd
qs
2
1
3
4
5
6
7
8
9
q;
q
a
S
elf-timer
/
recording
lamp (red)
AE/AF lock lamp
(green)
Flash charge lamp
(orange) (30)
01cov.book Page 13 Wednesday, May 22, 2002 3:40 PM
14
Preparing batteries
Use the following batteries in this camera.
Acceptable batteries
R6 (size AA) Nickel-Metal Hydride
batteries (2)
NH-AA-DI (2) (supplied)
NH-AA-2DI twin-pack (not supplied)
Batteries that cannot be used
Manganese batteries, lithium batteries, ni-
cad batteries, alkaline batteries*
*Alkaline batteries cannot be used with the
DSC-P71.
*Alkaline batteries can be used with the DSC-
P31. When alkaline batteries are used, take note
of the following information.
There is a big difference in the performance
of batteries of different types and of batteries
made by different manufacturers. This is
especially true in low temperatures, where
some batteries are noticeably weaker.
You may not be able to shoot in temperatures
below +5°C (41°F).
The battery remaining indicator may not
display the correct information.
Charging the batteries
,Insert Nickel-Metal Hydride
batteries into the charger
(supplied).
Be sure to charge the Nickel-Metal Hydride
batteries supplied with your camera before
using them.
Be sure to charge the batteries in an
environment where the ambient temperature is
10°C to 30°C (50°F to 86°F). If the batteries are
charged in an environment where the
temperature is outside that range, the batteries
may not charge efficiently.
Connect the battery charger to an easily
accessible wall outlet (mains) close by. If
something goes wrong while you are using the
charger, immediately shut off the power by
pulling the plug out of the wall outlet.
1
BC-CS1 (supplied)
Insert with the cor-
rect polarity +/
,Connect the charger to a wall
outlet (mains) using the power
cord (mains lead).
Charging starts, and the charge lamp lights.
When the charge lamp goes out, charging is
finished.
When charging is finished, disconnect the
power cord (mains lead) from the wall outlet
(mains), and remove the Nickel-Metal Hydride
batteries from the charger.
When transporting the Nickel-Metal Hydride
batteries, be sure to use the battery case
(supplied). If the +/ metal terminals are
shorted, there is a possibility of danger from
excessive heat or fire.
2
To the wall outlet
(mains) Power cord
(mains lead)
Charge
lamp
G
e
tti
ng s
t
ar
t
e
d
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:L1-Right-00
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
15
Getting started
Charging the Nickel-Metal
Hydride batteries
If the poles of the Nickel-Metal Hydride
batteries are dirty, the batteries may not
charge properly. Occasionally clean the poles
of the batteries and the terminals of the
charger by wiping them with a dry cloth.
At the time of purchase, or when the Nickel-
Metal Hydride batteries haven’t been used for
a long time, they may not fully charge. This is
typical of this type of battery, and is not a
malfunction. If this happens, repeatedly using
up the battery fully, and then recharging it,
should correct the problem.
Even when Nickel-Metal Hydride batteries
are not being used they loose their charge
naturally over time. It is recommended that
you recharge the batteries just before using
them.
If you recharge Nickel-Metal Hydride
batteries before fully using up the existing
charge, the so-called memory effect* can
occur, and the low battery warning will be
triggered sooner than expected. Charging the
battery after fully depleting the existing
charge should correct the problem.
*The “memory effect” – the situation in
which a battery temporarily accepts a less
than full charge.
To use up the batteries completely, put
the camera in the slide show mode and
leave it that way until the batteries are
used up (page 67).
Precautions to be observed
when charging the batteries
Do not charge any other batteries except Sony
Nickel-Metal Hydride batteries in the charger
supplied with your camera. If you try to
charge any other type of battery (e.g.,
manganese batteries, alkaline dry cells, or
one-time lithium batteries) than the batteries
specified, those batteries may leak, overheat,
or explode, causing the danger of burns or
other injuries.
Be sure to charge both Nickel-Metal Hydride
batteries at the same time.
When the batteries are charged, use them only
in an environment where the temperature
range is 0°C to 40°C (32°F to 104°F).
Otherwise, there is a danger of leaks,
explosions, excessive heat, fire, or electric
shock.
Do not charge fully charged Nickel Metal
Hydride batteries again. Otherwise, there is a
danger of leaks, explosions, excessive heat,
fire, or electric shock.
Do not peel off the external seals or damage
the batteries. Never use batteries from which
the seals have been partially or completely
removed, or batteries that have been split in
any way.
If you charge high-capacity batteries other
than the supplied Nickel-Metal Hydride
batteries, using the supplied BC-CS1 charger,
they might not be charged to the extent the
display indicators.
Charging time
This represents the time required to charge
fully depleted Nickel-Metal Hydride
batteries using the supplied BC-CS1
charger in an environment where the
ambient temperature is 25°C (77°F).
Charging is complete in approximately 13
hours. The charge lamp may remain lit longer
than 13 hours, but this is not a malfunction.
Do not disconnect the battery charger’s power
cord (mains lead) or remove the batteries
from the charger before the batteries are fully
charged. If the charging process is interrupted
before the batteries are fully charged, and
then the same batteries are charged for the full
13 hours, this may cause the “memory effect”
to occur, or may cause deterioration in the
performance of the batteries.
If you use the ACC-CSNQ STAMINA “Super
Quick charge” kit (not supplied), the batteries
will charge faster.
Nickel-Metal
Hydride battery Charging time
NH-AA-DI × 2
(supplied) Approx. 13
hours
01cov.book Page 15 Wednesday, May 22, 2002 3:40 PM
16
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:L1-Left-00
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Charging the Nickel-Metal hydride batteries (continued)
Battery remaining indicator
As the battery power decreases with use,
the Battery remaining indicator displays
the amount of power remaining using the
following symbols.
If the LCD screen is off, press the DISPLAY/
LCD ON/OFF button to turn it on.
Based on the conditions under which the
camera is being used and the state of the
charge, or on the environment, this
information may not be correctly indicated.
When the AC adaptor is being used, the
Remaining battery information is not
displayed.
The POWER SAVE function
When the POWER SAVE function is set
to ON, you can shoot for a longer period of
time.
DSC-P71
Turn the Mode dial to SET UP, and set
[POWER SAVE] in SETUP 2 to [ON].
The factory setting of the camera is set to
[ON] (page 98).
DSC-P51/P31
Set the POWER SAVE switch to ON.
When the camera is shipped from the
factory, this switch is set to ON.
When the POWER SAVE function is
ON
The LCD screen will be darker than it is when
POWER SAVE is set to OFF. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 98). To make the available
shooting time even longer, it is recommended
that you turn off the LCD screen and use the
Finder to do your shooting (page 32).
In Flash mode, the (No flash) is displayed.
If you want to shoot using the flash, press v
( ) on the control button, and select (forced
flash) or Auto (page 30).
When the power turns on, the Flash mode is
normally set to (No flash).
When the flash is charging ( the Flash
charge lamp blinks), the LCD screen turns
off.
In shooting still images, the focus only
focuses when the shutter is pushed down
halfway.
Battery
remaining
indicator
Battery remaining
guidelines
(A full charge is 100%)
Sufficient power
remaining
Battery half full
Battery low, recording/
playback will stop soon.
Flashing
Change the batteries for
fully charged ones, or
charge these batteries.
01cov.book Page 16 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
17
Getting started
Inserting the batteries
,Open the Battery cover.
Slide it in the direction of the arrow, and it
opens out.
,Insert the batteries.
Match the +/ poles of the batteries to the +/
marks inside the battery case.
Occasionally clean the poles of the batteries
and the terminals of the Battery cover by
wiping them with a dry cloth. If the poles of the
batteries or the terminals become covered with
a film of dirt or oil from the skin, the operating
time of the camera can be greatly reduced.
,Close the Battery cover.
Close the Battery cover while holding the
batteries in. The cover is closed when it
clicks.
To remove the batteries
Stand the camera on end, open the Battery
cover upward, then remove the batteries.
Make sure you don’t drop the batteries when
opening or closing the Battery cover.
1 2 3
01cov.book Page 17 Wednesday, May 22, 2002 3:40 PM
18
Inserting the batteries (continued)
Battery life and the number of
images that can be recorded/
played back
The tables show approximate guidelines for
the length of time the camera can be used
when you shoot in Normal mode in an
environment where the ambient
temperature is 25°C (77°F), and the
batteries are fully charged. The guidelines
for the number of images that can be
recorded or played back allow for changing
the supplied “Memory Stick” as necessary.
Actual results may differ slightly from
these, depending on the conditions of use.
Shooting still images
Under the average conditions*1)
*1) Shooting under the following conditions:
The image quality is set to [FINE].
The LCD screen is set to ON.
Shooting one image every 30 seconds.
Alternatively pressing the zoom W and T
buttons fully for each shot.
Using the flash once in every two shots.
Turning on and off once in every ten shots.
Shooting*2) continuously
*2) Shooting under the following conditions:
The image quality is set to [STANDARD].
Flash mode is set to (No flash).
Shooting continuously every three seconds.
Playing back*3) still images
*3) Showing single images in order, one
approximately every three seconds
Shooting*4) movies
*4) Continuous shooting with a picture size of
160×112
The battery life and the number of
images recordable decrease under the
following conditions:
At low temperatures.
Using the flash.
Turning on and off frequently.
Using the zoom frequently.
When [POWER SAVE] is set to [OFF].
When [LCD BACKLIGHT] is set to
[BRIGHT].
After using the batteries repeatedly over a
long period of time or after often allowing it
to self-discharge after charging (page 101).
Image size NH-AA-DI (2) (supplied)
No. of
images
Battery life
(min.)
DSC-P71
2048×1536 Approx. 230 Approx. 115
DSC-P51
1600×1200 Approx. 280 Approx. 140
DSC-P31
1600×1200 Approx. 280 Approx. 140
Image
size
NH-AA-DI (2) (supplied)
LCD
screen No. of
images
Battery
life (min.)
DSC-P71
2048×1536
640×480
ON Approx.
2000 Approx.
100
OFF Approx.
2400 Approx.
120
DSC-P51
1600×1200
640×480
ON Approx.
3000 Approx.
150
OFF Approx.
3600 Approx.
180
DSC-P31
1600×1200
640×480
ON Approx.
2400 Approx.
120
OFF Approx.
3000 Approx.
150
Image size NH-AA-DI (2) (supplied)
No. of
images
Battery life
(min.)
DSC-P71
2048×1536
640×480 Approx. 4600 Approx. 230
DSC-P51
1600×1200
640×480 Approx. 5600 Approx. 280
DSC-P31
1600×1200
640×480 Approx. 5600 Approx. 280
NH-AA-DI (2) (supplied)
LCD screen
ON
LCD screen
OFF
DSC-P71 Approx. 120 Approx. 170
DSC-P51 Approx. 150 Approx. 200
DSC-P31 Approx. 150 Approx. 200
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:L1-Right-01
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
19
Getting started
Using an external power source
,Open the DC IN jack cover,
then connect the AC-LS1 AC
power adaptor (not supplied)
to the DC IN jack of the camera.
Connect the cable with the v mark facing
up.
Recommended AC power adaptor:
AC-LS1 power adaptor (not supplied)
Connect the AC power adaptor to an easily
accessible wall outlet (mains) close by. If
something goes wrong while you are using the
adaptor, immediately shut off the power by
pulling the plug out of the wall outlet.
1
DC IN jack
cover
DC plug
AC power adaptor
(not supplied)
,Connect the power cord (mains
lead) to the AC power adaptor
and to the wall outlet (mains).
When you have finished using the AC power
adaptor, disconnect it from the DC IN jack of
the camera.
To use power from an automobile, use a DC
adaptor/Charger (not supplied).
If you insert or remove the DC plug while you
are using the batteries, the power may shut off.
2
2 To the wall outlet (mains
)
Power cord
(mains lead)
1
Using your camera
abroad
Power sources
You can use your camera in any country or
area with the supplied battery charger or the
AC-LS1 AC power adaptor (not supplied)
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a], if necessary, depending on the design of
the wall outlet (wall socket) [b].
Do not use an electronic transformer.
Using this may cause a malfunction.
BC-CS1
01cov.book Page 19 Wednesday, May 22, 2002 3:40 PM
20
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
masterpage:L1-Left-01
Turning on/off your camera
,Press the POWER button.
The POWER ON/OFF lamp lights in green,
the power is on. When you turn on your
camera for the first time, the CLOCK SET
screen appears (see the next page).
To turn off the power
If you press the POWER button again, the
POWER ON/OFF lamp goes out, and the
camera turns off.
When the mode dial is set to , , SCN
and you turn the power on, the lens begins to
move (DSC-P71 only). Please be careful not to
touch the lens.
POWER button
POWER ON/
OFF lamp The Auto Power Off
function
If no tasks are performed for a while*
when shooting, viewing, or performing
SET UP while using the batteries,
power is automatically shut off to
preserve battery power.
However, in the following
circumstances, even if the battery is
being used to power the camera, the
Auto Power Off feature will not work.
Movies are being played back
A slide show is being shown
There is a plug in the USB terminal
or the VIDEO OUT jack
*When POWER SAVE is set to ON:
approximately 90 seconds
When POWER SAVE is set to OFF:
approximately 3 minutes
How to use the
control button
To change the current settings of the
camera, bring up the menu or SET UP on
the LCD screen (page 55), and use the
control button to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
WHITE BAL
AUTO
ISO
WB
EV
ISO
0EV
0EV
01cov.book Page 20 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
21
Getting started
Setting the date and time
,Set the mode dial to .
To change values for the time and the date that
have been previously set, change the mode dial
to SET UP, choose [CLOCK SET] in SETUP 1
(page 97), then proceed from Step 3.
You can also carry out this operation when the
mode dial is set to SCN, , or .
, Press the POWER button.
The POWER lamp lights in green and the
CLOCK SET screen appears.
,Choose the desired order for
the date, the month and the
year using v/V on the control
button, then push the center z.
You can choose from [Y/M/D] (year/
month/day), [M/D/Y], and [D/M/Y].
If the rechargeable button battery, which
provides the power for saving the time data,
ever loses its charge (page 99), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
1
Mode dial
2
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /:
/ 1
1 12 00 AM
OK
POWER button 3
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /:
/ 1
1 12 00 AM
OK
01cov.book Page 21 Wednesday, May 22, 2002 3:40 PM
22
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\04BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Setting the date and time (continued)
,Choose the year, month, day,
hour, and minute items using
b/B.
A v will be shown above, and a V will be
shown below the item currently selected to
be set.
,Set the desired numerical
value using v/V on the control
button, then press the center
z.
After setting the current numerical value,
move to the next item. Repeat the above
process until all of the items have been set.
If you choose [D/M/Y] in Step 3, use the 24
hour clock display.
,Choose [OK] using the B on
the control button, and then
press the center z.
After the date and time are set, the clock
will start to keep time.
To cancel the setting process, choose
[CANCEL], and press the center z.
4
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /:
/ 1
1 12 00 AM
OK
5
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /:
/ 1
7 12 00 AM
OK
D/M/Y
OK
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /:
/ 4
7 10 30 PM
OK
6
01cov.book Page 22 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
23
Shooting still images
Inserting and removing a “Memory Stick”
,Open the “Memory Stick”
cover.
Slide the cover in the direction of the arrow
to open it.
,Insert the “Memory Stick.”
Insert the “Memory Stick” all the way in
until it clicks, as shown in the illustration.
Whenever you insert a “Memory Stick,” push it
all the way in until it clicks. If you do not insert
it correctly, a message such as “MEMORY
STICK ERROR” appears on the LCD screen.
,Close the ”Memory Stick”
cover.
To remove the “Memory Stick”
Open the “Memory Stick” cover, then push
the “Memory Stick” to pop it out.
Whenever the Access lamp is lit, the
camera is recording or reading out an
image. Never remove the “Memory
Stick” or remove the batteries at this
time.
1
Bottom
2
Label side Connector
side
3
Access
lamp
Shooting still images
01cov.book Page 23 Wednesday, May 22, 2002 3:40 PM
24
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Deciding the still image size and quality
,Set the mode dial to , turn on
the power, and then push the
MENU button.
The menu appears.
You can also carry out this operation when the
mode dial is set to SCN.
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
,Select (Image size) using b/
B on the control button. Use v/
V to select the desired image
size.
The image size is set.
,Select (Image quality) using
b/B on the control button. Use
v/V to select the desired image
quality.
The image quality is set.
When the setting is completed, press the
MENU button. The menu disappears from
the screen.
For image quality, you can choose either
[FINE] or [STANDARD].
The image size and quality values chosen here
will be preserved even when the camera is
turned off.
1
WHITE BAL
AUTO
ISO
Menu button 2
IMAGESIZE
640 x 480
1280 x 960
1600x1200
2048 (3 : 2)
2048x1536
SO
IMAGE SIZE
640 x 480
1280 x 960
1600 (3 : 2)
1600x1200
DSC-P71 DSC-P51/
P31 3
PFX
MODE
FINE
P.QUALITY
STANDARD
FINE
01cov.book Page 24 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:L1-Right-00
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
25
Shooting still images
Image size and quality
You can choose image size (number of
pixels) and image quality (compression
ratio) based on the kind of images you
want to shoot. The larger you make the
image size and the higher you make the
image quality, the better your image, but
also the larger the amount of data needed
to preserve your image. This means you
can save fewer images in your “Memory
Stick.”
Choose an image size and quality level
appropriate for the kind of images you
want to shoot.
You can resize the images later (Resize
function, see page 71).
You can choose image size from the
following tables.
Image size Examples
2048×1536 (DSC-P71) Very fine prints
2048(3:2) (DSC-P71) 3:2 prints*
1600×1200 Printing A4 size
images
1600 (3:2) (DSC-P51/P31) 3:2 prints*
1280×960
Printing postcard
size images
640×480
For images to be
attached to e-mail
The number of images* that can be saved in a “Memory Stick”
The number of images that can be saved in FINE (STANDARD) mode are shown below.
(Units: number of images)
*When the shooting mode is normal
For the number of images that can be saved in
other modes, see page 91.
Capacity 8MB 16MB 32MB 64MB 128MB
Image size
2048×1536
(DSC-P71) 5 (9) 10 (18) 20 (36) 40 (72) 80 (144)
2048(3:2)
(DSC-P71) 5 (9) 10 (18) 20 (36) 40 (72) 80 (144)
1600×1200 8 (15) 16 (30) 32 (60) 64 (120) 128 (240)
1600 (3:2)
(DSC-P51/P31) 8 (15) 16 (30) 32 (60) 64 (120) 128 (240)
1280×960 12 (22) 24 (44) 50 (93) 100 (186) 200 (372)
640×480 48 (118) 96 (240) 195 (488) 393 (983) 786 (1966)
The image size is the screen size used when
viewing the images on a personal computer.
When the images are viewed on the LCD
screen of the camera, they all look the same
size.
Number of shooting images can differ from
these values according to shooting conditions.
The image size value (e.g., 2048×1536) is the
number of pixels displayed.
For information how to shoot images to be
used as attachments to e-mail messages,
see page 65.
* This option records images in a horizontal to
vertical proportion of 3:2 to match the size of
the print paper used.
01cov.book Page 25 Wednesday, May 22, 2002 3:40 PM
26
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Basic still image shooting (using auto adjustment mode)
,Set the mode dial to , and
turn on your camera.
The lens cover opens when the power is turned
on.
When the camera is turned on or when using
the zoom, and the lens is moving, don’t touch
the lens assembly (DSC-P71 only) (page 28).
When the mode dial is set to , the exposure
and focus are adjusted automatically.
,Hold your camera with your
both hands and position a
subject in the center of the
frame to focus on.
Do not cover the lens or flash with your
fingers.
You can choose either Multi-point AF mode or
Center AF as the AF mode (page 58).
,Press and hold the shutter
halfway down.
The camera beeps. When the AE/AF lock
indicator stops flashing and remains on, the
camera is ready for shooting.
If you remove your finger from the shutter,
shooting will be canceled.
The minimum focal distance to a subject is
50cm (19 11/16 inches) for the DSC-P71; 8cm
(3 1/4 inches) for the DSC-P51 with the Zoom
button set to the W (wide angle) side, and 50cm
(19 3/4 inches) with the Zoom button set to the
T (telephoto) side; and 10cm (3 15/16 inches) or
more for the DSC-P31.To shoot subjects at
distances closer than this, use Macro mode
(DSC-P71 only).
The frame appearing on the LCD screen shows
the limits of the area where the focus will be
adjusted. (For more details on the AF range
finder, see page 58.)
1
Mode dial
23
2048
F5.6
500
4
Flashes in
green t remains o
n
01cov.book Page 26 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
27
Shooting still images
,Press the shutter fully down.
A beeping sound is heard, the shooting is
completed, and the still image is saved in
the “Memory Stick.” When the Recording
lamp (pages 9, 11, 13) goes out, you can
shoot the next image.
When you are shooting with the battery, if no
tasks are performed for a while* with the
camera turned on, power is automatically shut
off to preserve battery power (page 20).
*When POWER SAVE is set to ON:
approximately 90 seconds
When POWER SAVE is set to OFF:
approximately 3 minutes
Checking the last shot
image (Quick Review)
,Press b (7) on the control
button.
To return to shooting mode, press the
shutter lightly or press b (7) on the control
button again.
To delete the image displayed on the
LCD screen
1Press MENU button to display the menu.
2Press B on the control button to select
[DELETE], then press the center z.
3Press v on the control button to select
[OK], then press the center z.
The image will be deleted.
4
2048 About Auto Focus
When you try to shoot a subject that is
hard to focus on, the AE/AF lock
indicator will change to flashing
slowly.
The Auto Focus function may be
difficult to use with in the following
subjects. In such cases, release the
shutter, then try to recompose the shot
and focus again.
The subject is distant from the camera and
dark
The contrast of the subject and its
background is poor
The subject is seen through glass, such as
a window
A fast-moving subject
The subject has a reflection, such as that
from a mirror, or there is a luminous body
and a lustrous subject
A flashing subject
10:30
PM
2002 7 4100-0029
8/8
REVIEW
2048
01cov.book Page 27 Wednesday, May 22, 2002 3:40 PM
28
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Using the zoom feature
,Press the W (wide angle) or the
T (telephoto) side of the Zoom
button to choose the desired
image size, and shoot your
image.
The minimum distance needed
to focus on a subject
(From the end of the lens when the zoom button
is set all the way to either the W or T side)
DSC-P71
50 cm (19 11/16 inches) for both W and T
DSC-P51
8cm (3 1/4 inches) for W, and 50cm
(19 3/4 inches) for T
DSC-P31
10 cm (3 15/16 inches)
The lens moves when the zoom feature is being
used (DSC-P71 only). Be very careful not to
touch the lens.
The zoom feature cannot be used when shooting
movies (page 74) (DSC-P71/P31 only).
Shooting close-ups (Macro)
(DSC-P71 only)
For close-ups of small subjects like flowers
or insects, shoot using the Macro feature.
You can use this feature for close-ups of
subjects up to the distances specified below.
When the zoom is set all the way to
the W side: 10 cm (3 15/16 inches) from
the end of the lens
When the zoom is set all the way to
the T side: 50 cm (19 11/16 inches) from
the end of the lens
2048
4
2048
4
T
WT
W
W (wide-angle) T (telephoto) Digital zoom
DSC-P71/P51
When the Zoom exceeds 3x for the
DSC-P71 and 2x for the DSC-P51, the
digital zoom feature enlarges the image
up to a maximum of 6x using digital
processing. Because picture quality
deteriorates when digital zoom is used,
set [DIGITAL ZOOM] in SET UP to
[OFF] when this feature is not needed
(page 97).
DSC-P31
The DSC-P31 does not have an optical
zoom. It has only a 3x digital zoom.
There is no Digital zoom item in SET
UP.
When you are using digital zoom, you
cannot confirm the image using the finder.
When you are using the digital zoom
feature, the Auto focus frame is not
displayed.
T
W
The T side of this line shows
the extent of digital zoom
01cov.book Page 28 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
29
Shooting still images
,Set the mode dial to , and
press B ( ) on the control
button.
(Macro) appears on the LCD screen.
If the menu is currently displayed, press the
MENU button first and the menu disappears.
You can perform this operation even when the
mode dial is set to SCN (other than Landscape
mode) (page 34), or .
,Center the subject in the frame,
and shoot the image.
To return to normal shooting
Press B ( ) on the control button one more
time. disappears from the LCD screen.
Use the LCD screen to shoot when using the
Macro feature. If you use the finder, the limits
of what you see and what you actually shoot
may be different.
Using the self-timer
,Set the mode dial to , and
press V ( ) on the control
button.
(Self-timer) appears on the LCD screen.
If the menu is currently displayed, press the
MENU button first and the menu disappears.
You can perform this operation even when the
mode dial is set to SCN, or .
1
2048
4
2
2048
1
2048
4
01cov.book Page 29 Wednesday, May 22, 2002 3:40 PM
30
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
,Center the subject in the frame,
and press the shutter all the
way down.
The Self-timer lamp (page 8 for the DSC-
P71, page 10 for the DSC-P51, page 12 for
the DSC-P31) will blink in orange, and you
will hear a beeping sound. The image will
be shot within approximately 10 seconds.
To cancel the self-timer during the
operation
Press V ( ) on the control button one more
time.
If you stand in front of the camera and press the
shutter, the focus and the exposure may not be
correctly set.
Selecting a flash mode
,Set the mode dial to select ,
and press v ( ) on the control
button repeatedly to select a
flash mode.
Flash mode has the following features.
No indicator (Auto): Based on the
lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.
(forced flash): The flash will be used
regardless of the amount of ambient light.
(no flash): The flash will not be used.
If the menu is currently displayed, press the
MENU button first and the menu will
disappear.
You can change the brightness of the flash
using [FLASH LEVEL] in the settings menu
(page 93).
When Flash mode is set to Auto or (forced
flash), and you look at the LCD screen in a dark
place, you may notice some “noise” in the
image, but this will have no effect on the image
you shoot.
While the flash is being charged, the Flash
charging lamp blinks. When charging is
completed, the lamp goes out.
When you press the shutter button halfway
down while the flash is flashing, the Flash
charge lamp turns on.
2
2048
F5.6
3
500
2048 4
01cov.book Page 30 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:L1-Right-03
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
31
Shooting still images
To reduce “red-eye” when
shooting live subjects
When the flash begins to strobe before
the image is shot, the red-eye
phenomenon is reduced. In SET UP,
set [RED EYE REDUCTION] to [ON]
(page 97). appears on the LCD
screen.
The amount of red-eye reduction possible
varies according to the individual. In
addition, the distance to the subject, and
whether or not the subject has seen the
flash begin to strobe may also reduce the
effectiveness of the red-eye reduction
process.
m
Shooting with the AF
illuminator
This is additional lighting provided to
assist in focussing when shooting in dark
places.
Set [AF ILLUMINATOR] (page 97) in
SET UP to [AUTO]. When shooting,
appears; the AF illuminator will flash
automatically during the time between
when the shutter is pressed halfway down
and the focus locks.
When the AF illuminator flashes, but
sufficient light does not reach the subject
(the maximum recommended distance for
this feature is approximately 2.8m (9.2 ft.)
(wide) and 1.8m (5.9 ft.) (tele) for the DSC-
P71), 2.2m (7.2 ft.) (wide/tele) for the DSC-
P51, and 2.5 m (8.2 ft.) for the DSC-P31, or
the subject has weak contrast, the camera
may not focus properly.
The light from the AF illuminator may miss
the center of the image somewhat, but as
long as it reaches the subject, the camera will
focus properly.
When the focus is adjusted manually, the AF
illuminator doesn’t function.
When shooting in following Scene Selection
mode (see page 34), the AF illuminator will
not function.
: in Twilight mode
: in Landscape mode
The AF illuminator is a bright light. There
are no safety hazards, but when shooting at
short distances, do not aim it directly at the
subject’s eyes.
ON
2048
ON
6
01cov.book Page 31 Wednesday, May 22, 2002 3:40 PM
32
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Shooting with the finder
The finder is convenient when you want to
save battery power, or when it is difficult to
confirm the image using the LCD screen.
Each time you press the DISPLAY/LCD
ON/OFF button, the display changes in the
following order.
When the LCD screen display is off (only
warning messages are displayed)
For further details on the items displayed, see
page 103.
Just as with the AE/AF lock indicator on the
LCD screen display, when the AE/AF lock
lamp of the Finder section stops flashing and
remains lit, you can start shooting again
(page 26).
When the LCD screen display is turned off, the
digital zoom does not function (page 28).
When the LCD screen display is turned off, if
you press the (Flash mode)/ (Self-timer)/
(Macro, DSC-P71) or (SPOT
METER, DSC-P51/P31), the image will be
displayed on the screen for approximately 2
seconds so you can check or change the setting.
Shooting with the date and
time inserted
,Set the mode dial to SET UP.
The SET UP menu is displayed.
When images are shot with the date and time
inserted, the date and time cannot be removed
later.
When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, instead, is
displayed in the upper left portion of the LCD
screen. The actual date and time are displayed
when the image is played back.
When you have chosen a date format, you can
choose [Insert the correct date and time]
(page 21), and the information will be inserted
in the format you chose.
The “DIGITAL ZOOM” item is not displayed
on the SET UP screen of the DSC-P31
(page 28).
Finder
DISPLAY/
LCD
ON/OFF
button
2048 4
F5.6
500
r
LCD screen display is OFF
r
Screen display is set to ON. 1
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
AF ILLUMINATOR :
MPEG MOVIE
OFF
ON
OFF
AUTO
SELECT
01cov.book Page 32 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
33
Shooting still images
,Select (CAMERA) using v/V
on the control button and
press B.
Select [DATE/TIME] using v/V
and press B.
,Choose the type of data to be
inserted using v/V on the
control button, then press the
center z.
DAY & TIME: Inserts the date and the time
of shooting into the image
DATE: Inserts the year, the month and the
date of shooting into the image
OFF: Does not insert date/time data into the
image
After the setting has been completed, turn
the mode dial to , and continue your
shooting.
You can also carry out this operation when the
mode dial is set to SCN.
The settings made here will be saved even
when the power is turned off.
2
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
AF ILLUMINATOR :
DAY&TIME
DATE
OFF
OK
3
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
AF ILLUMINATOR :
MPEG MOVIE
DAY&TIME
ON
OFF
AUTO
PAGE SELECT
01cov.book Page 33 Wednesday, May 22, 2002 3:40 PM
34
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Shooting according to scene conditions
(SCENE SELECTION)
Ordinarily shoot with the camera set to
Auto (mode dial: ), but when shooting
scenes or people in the dark places, or
shooting landscapes, use the modes listed
below to increase the quality of your
images.
Twilight mode
Under dark lighting conditions, you can
shoot using the Twilight mode, and still get
good images. However, because the shutter
speed is slower under these conditions, we
recommend you use a tripod.
The flash cannot be used.
Twilight portrait mode
Use this mode when shooting people in the
foreground at night.
Because the shutter speed is slow, it is
recommended that you use a tripod.
Allows you to shoot images of people in the
foreground with distinct outlines without losing
the feeling that you are shooting at night.
The flash automatically strobes.
Landscape mode
Focuses on images far away, so is
convenient for shooting landscapes at a
distance.
You cannot shoot in Macro mode.
,Set the mode dial to SCN, and
press the MENU button.
The menu appears.
Twilight mode
Twilight portrait mode
Landscape mode
1
WB
EVSCN
0EV
0EV
MENU button
01cov.book Page 34 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\05BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
35
Shooting still images
,Select [SCN] using b/B on the
control button.
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
,Select the desired mode using
v/V on the control button.
The mode will be set to your choice.
When the setting is completed, press the
MENU button. The menu disappears from
the screen.
When you cancel Scene selection, set the mode
dial to something other than SCN.
The settings made here will be saved even
when the power is turned off.
2
WB
SCN
3
WB
SCN
NR slow shutter
In Twilight or Twilight portrait mode,
when the shutter speed becomes a 1/2
second or slower, “NR” is displayed
before the shutter speed indication, and
the camera automatically changes to
the NR slow shutter mode.
The NR slow shutter mode removes
noise from recorded images, providing
clear images. To eliminate the effects
of vibration, use of a tripod is
recommended.
F5.6
NR2”
CAPTURING
PROCESSING
Press the shutter all
the way down.
Then the screen turns
black.
Finally, when
“PROCESSING”
disappears, the image
has been recorded.
r
r
01cov.book Page 35 Wednesday, May 22, 2002 3:40 PM
36
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\06BAS.FM]
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
masterpage:L1-Left-01
Viewing images on the LCD screen of your
camera
You can see the images you shoot with this
camera almost immediately on the LCD
screen. This camera offers the following
three methods for viewing your images.
Single (single-image display)
You can view one image at a time,
occupying the entire screen.
Index (nine-image display)
Nine images will be displayed
simultaneously in separate panels on the
screen.
Index (triple-image display)
Three images will be displayed
simultaneously in separate panels on the
screen. Various items of image information
will also be displayed.
FILE BACK/NEXT
10:30
PM
2002 7 4100-0028
8
/
8
640
SINGLE DISPLAY SINGLE DISPLAY
APERTURE VALUE :
SHUTTER SPEED :
EXPOSURE VALUE :
ISO
:
F5.6
1/500
0.0
100
10:30
PM
2002 7 4100-0028
Single
(single-image display) Index
(nine-image display) Index
(triple-image display)
For movies, see page 75.
For information on the various symbols
displayed, see page 105.
Viewing single images
,Set the mode dial to , and
turn on the power.
The last image you shot will be displayed.
1
FILE BACK/NEXT
10:30
PM
2002 7 4100-0028
640
8
/
8
Viewing still images
01cov.book Page 36 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\06BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
37
Viewing still images
,Select Still Image using b/B on
the control button.
b : Displays the previous image.
B : Displays the next image.
Viewing Index (nine- or
triple-image display)
,Press the Zoom W button once.
The display switches to the Index (nine-
image) screen.
To display the previous (next) Index
screen
Press v/V/b/B on the control button to
move the yellow frame up/down/left/right.
,Press the Zoom W button once
more.
The display switches to the Index (triple-
image) screen.
When you press v/V on the control button,
the remaining image information is
displayed.
To display the previous (next) Index
screen
Press b/B on the control button.
To return to the single-image screen
Repeatedly press the Zoom T button, or
press the center z on the control button.
2
FILE BACK/NEXT
10:30
PM
2002 7 4100-0029
640
8
/
8
SINGLE DISPLAY SINGLE DISPLAY
APERTURE VALUE :
SHUTTER SPEED :
EXPOSURE VALUE :
ISO
:
F5.6
1/500
0.0
100
10:30
PM
2002 7 4100-0028
01cov.book Page 37 Wednesday, May 22, 2002 3:40 PM
38
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\06BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Viewing images on a TV screen
,Using the video connecting
cable, connect the VIDEO OUT
jack of the camera to the Image
of the TV set.
Connect the video cable to the camera and the
TV set only after confirming that both are
turned off.
,Turn on the power of the TV
set, and set the TV/Video
toggle switch of the TV to
“Video.
Depending on your TV set, the name and
location of this switch may be different.
,Set the mode dial to and
turn on the camera.
Press b/B on the control button to select an
image.
When using this feature, it may be necessary to
switch the video output signal to match that of
your TV system (see page 98).
1
VIDEO OUT jack
Video connecting cable
(supplied) 2TV/Video toggle switch
FILE BACK/NEXT
10:30
PM
2002 7 4100-0028
8/8
640
3
01cov.book Page 38 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\07BAS.FM]
masterpage:L1-Right-02
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
39
Deleting still images
Watching the playback picture
on TV
If you want to view the playback
picture on a TV, you need a TV having
a video input jack and a video
connecting cable.
The color system of the TV must be the
same as that of your digital still camera.
Check the following list:
NTSC system
Bahama Islands, Bolivia, Canada,
Central America, Chile, Colombia,
Ecuador, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan, the
Philippines, the U.S.A., Venezuela, etc.
PAL system
Australia, Austria, Belgium, China,
Czech Republic, Denmark, Finland,
Germany, Holland, Hong Kong, Italy,
Kuwait, Malaysia, New Zealand,
Norway, Portugal, Singapore, Slovak
Republic, Spain, Sweden, Switzerland,
Thailand, United Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Hungary,
Iran, Iraq, Monaco, Poland, Russia,
Ukraine, etc.
Deleting images
,Set the mode dial to and
turn on the camera. Press b/B
on the control button to select
an image to be deleted.
1
FILE BACK/NEXT
10:30
PM
2002 7 4100-0028
8/8
2048
,Press the MENU button, press
b/B on the control button to
select [DELETE], then press
the center z.
The image has not yet been deleted at this
point.
2
8/8
2048
OK
DELETE SLIDEPRINT
PROTECT
MENU
button
Deleting still images
01cov.book Page 39 Wednesday, May 22, 2002 3:40 PM
40
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\07BAS.FM]
masterpage:L1-Left-02
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Deleting images (continued)
,Select [OK] using v on the
control button, then press the
center z.
“MEMORY STICK ACCESS” appears on
the screen. When this message disappears,
the image has been deleted.
To cancel the deletion
Using V on the control button, choose
[CANCEL], then press the center z.
3
8/8
2048
O K
DELETE
CANCEL
OK
Deleting on the Index (nine-image) screen
,While an Index (nine-image)
screen (page 37) is displayed,
press the MENU button, select
[DELETE] using b/B on the
control button, then press the
center z.
1
PROTECT PRINTDELETE
MENU
button
,Select [SELECT] using b/B on
the control button, then press
the center z.
To delete all the images
Select [ALL] using b/B on the control
button, then press the center z. Select
[OK] again, and press the center z. To
cancel the deletion, select [EXIT], then
press the center z.
2
CANCEL
DELETE
ALLSELECT
01cov.book Page 40 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\07BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
41
Deleting still images
,Select the image you want to
delete using v/V/b/B on the
control button then press the
center z.
The (Delete) mark appears on the
selected image. At this point, the image has
not yet been deleted. Put the (Delete)
marks on all of the images you want to
delete.
To cancel your selection, press the center z
one more time.
,Press the MENU button, select
[OK] using b/B on the control
button, then press the center
z.
When “MEMORY STICK ACCESS”
disappears, the images have been deleted.
To cancel the deletion
Using b on the control button, select
[EXIT], then press the center z.
Deleting on the Index (triple-
image) screen
,While an Index (triple-image)
screen (page 37) is displayed,
display the image you want to
delete to the center using b/B
on the control button.
3
TO NEXT
MENU
SET
4
EXITDELETE OK
1
SINGLE DISPLAY
APERTURE VALUE :
SHUTTER SPEED :
EXPOSURE VALUE :
ISO
:
F5.6
1/500
0.0
100
10:30
PM
2002 7 4100-0028
01cov.book Page 41 Wednesday, May 22, 2002 3:40 PM
42
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\07BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Deleting on the Index (triple-
image) screen (continued)
,Press the MENU button, and
select [DELETE] using the V on
the control button, then press
the center z.
At this point, the image has not yet been
deleted.
,Select [OK] using v on the
control button, then press the
center z.
When “MEMORY STICK ACCESS”
disappears, the image has been deleted.
To cancel the deletion
Use V on the control button to select
[CANCEL], then press the center z.
2
OK
10:30
PM
2002 7 4100-0028
PROTECT
PRINT
DELETE
MENU
button 3
OK
10:30
PM
2002 7 4100-0028
O K
DELETE
CANCEL
01cov.book Page 42 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\07BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
43
Deleting still images
Formatting a “Memory Stick”
,Insert the “Memory Stick” you
want to format into the camera.
Set the mode dial to SET UP,
and turn on the power.
The term “formatting” means preparing a
“Memory Stick” to record images; this process
is also called “initialization.” The “Memory
Stick” provided with this camera, and those
available commercially, are already formatted,
and can be used immediately. When you
format a “Memory Stick,” be aware that
all of the images in the “Memory Stick”
will be permanently deleted.
,Select (SETUP 1) using v/V
on the control button, select
[FORMAT] by pressing B.
Then, press B, select [OK]
using v/V, and press the
center z.
To cancel the formatting
Select [CANCEL] using V on the control
button, then press the center z.
,Select [OK] using v/V on the
control button, then press the
center z.
The “FORMATTING” message appears.
When this message disappears, the format
is complete.
12
SETUP 1
FORMAT :
FILE NUMBER :
/LANGUAGE :
CLOCK SET :
O K
CANCEL
OK
3
OK
READY?
FORMAT
ALL DATA WILL BE ERASED
CANCEL
O K
01cov.book Page 43 Wednesday, May 22, 2002 3:40 PM
44
Copying still images to your computer
Follow the steps below to copy the images
you shot to your computer.
Steps required by your OS
(Operating System)
Step 1 may be unnecessary depending on your
OS.
After you complete the installation of the USB
driver, step 1 is unnecessary.
Recommended computer
environment
Recommended Windows environment
OS: Microsoft Windows 98, Windows
98SE, Windows 2000 Professional,
Windows Millennium Edition,
Windows XP Home Edition, or
Windows XP Professional
An OS installed at the factory (not
upgraded) is required for correct
operations. We cannot guarantee
operations for operating systems not
listed above.
CPU: MMX Pentium 200 MHz or faster
USB connector:
Provided as standard equipment
Display:
Resolution of 800×600 dots or
higher, High Color (16-bit color,
65 000 colors) or more
Recommended Macintosh environment
OS: Mac OS 8.5.1, 8.6, 9.0, 9.1, 9.2, or
Mac OS X(v10.0/v10.1)
An OS installed at the factory is
required for correct operations. For
the following models, update your
OS to Mac OS 9.0 or 9.1.
iMac with Mac OS 8.6 installed at
the factory, and a slot loading type
CD-ROM drive
iBook or Power Mac G4 with the
Mac OS 8.6 installed at the factory
USB connector:
Provided as standard equipment
Display:
Resolution of 800×600 dots or
higher, 32 000-color mode or higher
If you connect two or more USB devices to
your computer at one time, some devices,
including your camera, may not work,
depending on the type of USB device.
Operations are not guaranteed when using a
USB hub.
Operations are not guaranteed for all the
recommended environments mentioned above.
USB mode
There are two modes for a USB connection,
[NORMAL] and [PTP] modes. The factory
setting is the [NORMAL] mode. This
section describes the USB connection using
the [NORMAL] mode.
Communication with your
computer (for Windows users
only)
If you recover your computer from the
suspend or sleep mode, communication
between your camera and your computer
may not recover at the same time.
When a USB connector is not
provided on your computer
When neither a USB connector nor a
“Memory Stick” slot is provided, you can
copy images using an additional device. See
the Sony Website for details.
OS Steps
Windows 98/98SE/2000/
Me Steps 1 to 5
(pages 45 to 53)
Windows XP Steps 2 to 5
(pages 46, 47, 49
to 53)
Mac OS 8.5.1/8.6/
9.0/9.1/9.2,
Mac OS X (v10.0/v10.1)
Page 54
C
opy
i
ng s
till
i
mages
t
o your compu
t
e
r
45
Copying still images to your computer
1 Installing the USB driver
,Turn on your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
Do not connect your camera to your
computer at this time.
The opening window appears. If it does not
appear, double-click (My Computer) t
(ImageMixer) in order.
This section describes how to establish a USB
connection using Windows Me as an example.
Required operations may be different
depending on your OS.
Shut down all other applications before
installation of the driver.
When you are using Windows 2000, log on as
Administrators.
,Click [USB Driver] on the
opening window.
The “InstallShield wizard” window
appears.
Set the display to 800×600 dots or higher and
High Color (16-bit color, 65 000 colors) or more.
If it is set to less than 800×600 dots and 256
colors, the installation window does not appear.
,Click [Next]. When the
[Information] window appears,
click [Next].
The USB driver installation starts. When
the installation is completed, the window
informs you of completion. Then, eject the
CD-ROM.
1
Opening window
2
Click here
3Click here
46
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:L1-Left-02
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
,Click [Yes, I want to restart my
computer now], then click
[Finish].
Your computer restarts. Then, you can
establish the USB connection.
You can use the “PIXELA ImageMixer for
Sony” software to copy images to your
computer. To install this software, click
“PIXELA ImageMixer,” on the opening
succeeding window, then follow instructions on
each window.
Be sure to install DirectX when using the
“PIXELA ImageMixer for Sony” software.
Click [DirectX] and follow instructions on each
succeeding window. Your computer restarts
when the installation is completed.
4
1
2
2 Preparing your camera
,Insert the “Memory Stick” with
the images you want to copy
into the camera. Connect the
camera and the AC power
adaptor (not supplied), and
plug the adaptor into a wall
outlet (mains).
For further details on the “Memory Stick,” see
page 23.
For further details on the AC power adaptor,
see page 19.
1
“Memory
Stick” To the
wall outlet
(mains)
3
AC power 2
adaptor
1
,Turn on your computer and
your camera.
2
01cov.book Page 46 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
47
Copying still images to your computer
3 Connecting your camera to your computer
,Open the jack cover, and
connect the supplied USB
cable to your camera. Then,
connect the other end of the
USB cable to your computer.
When using a desktop computer, connect the
USB cable to the USB connector on the rear
panel.
When using Windows XP, the copy wizard
automatically appears on the desktop. Proceed
to page 49.
“USB MODE NORMAL” appears on the
LCD screen of your camera. When a USB
connection is established for the first time,
your computer automatically runs the used
program to recognize your camera. Wait for
a while.
If “USB MODE NORMAL” does not appear,
confirm that [USB CONNECT] is set to
[NORMAL] in the SET UP settings (page 98).
12
USB MODE
NORMAL
a a a a
Removing the USB cable
from your computer or the
“Memory Stick” from your
camera during a USB
connection
For Windows 2000, Me, or XP users
1Double-click on the tasktray.
2Click (Sony DSC), then click
[Stop].
3Confirm the device on the
confirmation window, then click
[OK].
4Click [OK].
This step is unnecessary for
Windows XP users.
5Disconnect the USB cable or
remove the “Memory Stick.”
For Windows 98 or 98SE users
Carry out only Step 5 above.
01cov.book Page 47 Wednesday, May 22, 2002 3:40 PM
48
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
4 Copying images
,Double-click [My Computer],
then double-click [Removable
Disk].
The contents of the “Memory Stick”
inserted in your camera appear.
This section describes an example of copying
images into the “My Documents” folder.
When using Windows XP, see pages 49 to 51.
When the “Removable Disk” icon does not
appear, see the next page.
You can use the “PIXELA ImageMixer for
Sony” software to copy images to your
computer. For details, see the software’s help
files.
,Double-click [DCIM], then
double-click [100MSDCF].
The “100MSDCF” folder opens.
The “100MSDCF” folder contains the image
files you shot using your camera.
The folder names vary depending on the type of
images they contain (page 51).
,Drag and drop the image files
into the “My Documents”
folder.
The image files are copied to the “My
Documents” folder.
When you try to copy an image to a folder in
which an image with the same file name is
stored, the overwrite confirmation message
appears. When you want to overwrite the
existing image with the new one, click [Yes].
When you do not want to overwrite it, click
[No], then change the file name.
12 3
01cov.book Page 48 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
49
Copying still images to your computer
4 Copying images
,Click [Copy pictures to a folder
on my computer using
Microsoft Scanner and Camera
Wizard] window, then click
[OK].
The “Scanner and Camera Wizard” window
appears.
When following the steps on page 47, the copy
wizard appears on the desktop of your
computer.
,Click [Next].
The images stored in the “Memory Stick”
are displayed.
When a removable disk
icon is not shown
1Right-click [My Computer], then
click [Property].
The “System Property” window
appears.
2Confirm if other devices are already
installed.
1Click [Device Manager].
2Double-click [ Other Devices].
3Confirm if there is a “ Sony
DSC” or Sony Handycam”
with a mark.
3If you find either of the devices
above, follow the steps below to
delete them.
1Click [ Sony DSC] or “ Sony
Handycam.
2Click [Delete].
The “Device deletion
confirmation” window appears.
3Click [OK].
The device is deleted.
Try the USB driver installation again
using the supplied CD-ROM (page 45).
1
1
22Click here
01cov.book Page 49 Wednesday, May 22, 2002 3:40 PM
50
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
4 Copying images (continued)
,Click to remove the
checkmark from any images
you do not want to copy to
your computer, then click
[Next].
The “Picture Name and Destination”
window appears.
,Specify the image file names to
be copied and the copy
destination, then click [Next].
Copying of the images starts. When the task
is completed, the “Other Options” window
appears.
Copy images into the “My Documents” folder.
,Click [Nothing. I’m finished
working with these pictures],
then click [Next].
The “Completing the Scanner and Camera
Wizard” window appears.
3
1
24
1
25
1
2
01cov.book Page 50 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:L1-Right-02
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
51
Copying still images to your computer
,Click [Finish].
The wizard window closes.
When you want to continue copying other
images, disconnect the USB cable once and
reconnect it. Then, follow the process from
Step 1.
6Click here
Image file storage destinations and file names
The image files recorded with your camera
are grouped as folders in the “Memory
Stick,” depending on the recording modes.
Example: when viewing folders on
Windows Me
Folder containing still image/Clip Motion/
Multi Burst mode image data
Folder containing E-mail mode image data
Folder containing Movie data
01cov.book Page 51 Wednesday, May 22, 2002 3:40 PM
52
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:L1-Left-00
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Image file storage destinations and file names (continued)
Note on the table
The meanings of the file names are as above:
ssss stands for any number within the range from 0001 to 9999.
The numerical portions of the following files are the same.
A small-size image file shot in E-MAIL mode and its corresponding image file
An image file shot with Clip Motion and its corresponding index image file
Folder File name File meaning
100MSDCF DSC0ssss.JPG Still image files shot normally
Still image files shot in
E-MAIL mode (page 65)
Multi Burst mode (page 64)
CLP0ssss.GIF Clip Motion files shot in NORMAL mode (page 62)
CLP0ssss.THM Index image files of Clip Motion files shot in NORMAL mode
MBL0ssss.GIF Clip Motion files shot in MOBILE mode (page 62)
MBL0ssss.THM Index image files of Clip Motion files shot in MOBILE mode
IMCIF100 DSC0ssss.JPG Small-size image files shot in E-MAIL mode (page 65)
MOML0001 MOV0ssss.MPG Movie files shot normally (page 74)
01cov.book Page 52 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\08BAS.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
53
Copying still images to your computer
5 Viewing the images on your computer
,Double-click [My Documents]
on the desktop.
The “My Documents” folder opens.
This section describes the steps followed for
copying images to the “My Documents” folder
on pages 48, 49.
When using Windows XP, click [Start]t[My
Documents] in that order.
You can use the “PIXELA ImageMixer for
Sony” software to view images on your
computer. For details, see the software’s help
files.
,Double-click the desired image
file.
The image file opens.
1 2
01cov.book Page 53 Wednesday, May 22, 2002 3:40 PM
54
For Macintosh users
Follow the steps below, according to your
OS.
Set the display to 800×600 dots or higher
and 32 000-color mode or higher.
1 Installing the USB driver
(For Mac OS 8.5.1, 8.6, or 9.0 users
only)
1Turn on your computer, and set the
supplied CD-ROM to the CD-ROM
drive.
The “PIXELA ImageMixer” window
appears.
2Double-click (Setup Menu).
3Click (USB Driver).
The “USB Driver” window appears.
4Double-click the icon of the hard disk
containing the OS to open the window.
5Drag and drop the following two files
from the window opened in step 3 to the
System Folder icon in the window
opened in step 4.
Sony USB Driver
Sony USB Shim
6When the message “Do you want to put
these items into Extension Folder?” is
shown, click [OK].
7Restart your computer.
2 Preparing your camera
For details, see page 46.
3 Connecting your camera to
your computer
For details, see page 47.
Removing the USB cable from your
computer or the “Memory Stick” from
your camera during a USB connection.
Drag and drop the drive icon of the
“Memory Stick” to the “Trash” icon, then
remove the USB cable or “Memory Stick.”
*If you are using Mac OS X, remove the USB
cable, etc., after you have turned your computer
off.
4 Copying images
1Double-click the newly recognized icon
on the desktop.
The contents of the “Memory Stick”
inserted in your camera appear.
2Double-click [DCIM].
3Double-click [100MSDCF].
4Drag and drop the image files to the hard
disk icon.
The image files are copied to your hard
disk.
5 Viewing the images on your
computer
1Double-click the hard disk icon.
2Double-click the desired image file in
the folder containing the copied files.
The image file opens.
You can use the “PIXELA ImageMixer for
Sony” software to copy images to your
computer and view the images on your
computer. To install the software, insert the
supplied CD-ROM drive, then click the
installer icon to select the desired language
under “PIXELA ImageMixer” on the opening
window and follow the instructions on each
window. For details, see the software's help
files.
OS Steps
Mac OS 8.5.1/8.6/9.0 Steps 1 to 5
Mac OS 9.1/9.2/
Mac OS X(v10.0/v10.1) Steps 2 to 5
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\09ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
55
Before advanced operations
How to setup and
operate your camera
Here we will explain the most commonly
used menus and the SET UP screen.
Changing menu settings
aPress the MENU button and
the menu will be displayed.
bSelect the setting item you
want to change using b/B on
the control button.
The letters and symbols of the item
you select will turn yellow.
cSelect the desired setting
using v/V on the control
button.
The frame of the selected setting will
turn yellow, and the setting will be
made.
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
To turn off the menu display
Press the MENU button.
Changing items in the SET
UP screen
aSet the mode dial to SET UP,
and the SET UP screen
appears.
bSelect the setting item you
want to change using v/V/b/B
on the control button.
The frame of the item you select will
turn yellow.
cPress the center z on the
control button to enter the
setting.
On the DSC-P31, the "DIGITAL ZOOM"
(page 28) and "POWER SAVE" (page 16)
items are not displayed. On the DSC-P51/P31,
the “POWER SAVE” (page 16) item is not
displayed.
To turn off the SET UP screen
display
Set the mode dial to anything other than
SET UP.
Mode Dial
Control button
MENU button
WB
EV ISO
0EV
0EV
WB
FOCUS ISO
MULTI AF
CENTER AF
0.5m
1.0m
3.0m
7.0m
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
RED EYE REDUCTION :
AF ILLUMINATOR :
MPEG MOVIE
OFF
ON
OFF
AUTO
SELECT
SETUP 2
SHUTTER
O N
OFF
LCD BRIGHTNESS :
LCD BACKLIGHT :
BEEP :
VIDEO OUT :
USB CONNECT :
POWER SAVE :
OK
Before advanced operations
01cov.book Page 55 Wednesday, May 22, 2002 3:40 PM
56
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Adjusting the
exposure
– EV adjustment
Mode dial: /SCN/
Used when you want to change the
automatic exposure to one of your own
choice. The value can be set over a range
from +2.0EV to –2.0EV, in 1/3EV
increments.
aSet the mode dial to , SCN,
or .
bPress the MENU button.
The menu appears.
cSelect (EV) using b/B.
The value of the exposure adjustment
is displayed.
dSelect the exposure
adjustment value.
Select the exposure adjustment value
using v/V
.
Make your adjustment while
confirming the brightness of the
background of the subject on the LCD
screen.
To return to auto adjust mode
Return the exposure adjustment value to 0
EV.
(SPOT METER) is not displayed on
the menu of the DSC-P51/P31 (page 61).
When the subject is at the brightest or
darkest ends of the range, or when you are
using the flash, the adjustment value set
may not actually be used.
Mode dial
MENU button
Control button
0EV
WB
EV ISO
0EV
Shooting techniques
In normal shooting, the camera makes
automatic exposure adjustments. Check the
image to be shot, if it looks like the image
below, you should make manual adjustments.
If you are shooting a back-lit person or a
snowy scene, make your adjustments in the +
plus direction; if you have a dark subject that
fills the screen, making your adjustments in the
– direction should give the best results.
Inadequate exposure
t Adjust in the + direction
Appropriate exposure
Overexposed t Adjust in
the – direction
Advanced still image shooting
01cov.book Page 56 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
57
Advanced still image shooting
Adjusting color tones
– WHITE BALANCE
Mode dial: /SCN/
When shooting images using automatic
features, the white balance is set
automatically in response to the condition
of the subject, and the overall color balance
is adjusted accordingly. When you want to
fix the conditions under which the image is
captured, or when shooting under special
lighting conditions, you can select the
settings manually.
AUTO (no display)
The white balance is adjusted
automatically.
Daylight ( )
Used when shooting outdoors, and for
shooting at night, under neon lights, for
fireworks, sunrises and sunsets.
Cloudy ( )
Used when shooting under a cloudy sky.
Fluorescent ( )
Used when shooting under fluorescent
lights.
Incandescent ( )
Used when shooting, for example, at a
party, where the lighting conditions
change often
Used in a studio, or under video lights
Used when shooting under sodium or
mercury lights
aSet the mode dial to , SCN,
or .
bPush the MENU button.
The menu appears.
cSelect [WB] (WHITE
BALANCE) using b/B, then
select the desired setting
using v/V.
To return to automatic settings
In Step 3, select [AUTO].
Under fluorescent lights that flicker, even if you
choose Fluorescent, you may feel that the
overall color of the image may show
differences from the actual color.
When the flash is triggered, the manual setting
is cancelled, and the shooting of the image is
done in “AUTO” mode.
Control button
Mode dial
MENU button
Shooting techniques
The color of the subject that you see will be
captured according to the lighting
conditions. Under the bright summer sun,
everything will appear bluish, under a light
sources like a light bulb, white objects will
appear will appear reddish. The human eye
has an excellent ability to adjust. Even when
lighting conditions change, the eye can
adjust and recognize the correct color almost
instantly. However, digital still cameras are
greatly influenced by light. Normally, this
camera adjusts automatically, but if you
notice that the color of the entire image
seems to be a bit unnatural when replaying
an image on the LCD screen, it is
recommended that you adjust the white
balance.
01cov.book Page 57 Wednesday, May 22, 2002 3:40 PM
58
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Choosing a focus
method
– MULTI AF/CENTER AF
Mode dial: /SCN/
Multipoint AF
When you use Multipoint AF, it calculates
the distance in three places, in the center of
the image, and to both the left and right of
the center, you can shoot with the auto focus
function without being dependent on the
composition of the image. It is useful when
it is difficult to focus on the subject because
it is not in the center of the frame.
Center AF
You can focus automatically using the AF
range finder in the center of the frame.
aSet the mode dial to either ,
SCN, or .
bPress the MENU button.
cSelect 9 (FOCUS) using b/B,
select [MULTI AF] or [CENTER
AF] using v/V.
The focus is adjusted automatically. The
color of the AF range finder frame changes
from white to green.
Multipoint AF
Center AF
When you are shooting movies (MPEG
MOVIE) and you choose Multipoint AF, the
distance to the center of the screen is estimated
as an average, so the AF works even with a
certain amount of vibration. The Center AF
automatically focuses only on the center of the
image, so it is convenient when you want to
focus only on what you aim at.
When you use Digital zoom or AF illuminator,
priority AF movement is given to subjects in or
near the center of the frame. In this case, the AF
range finder isn’t displayed.
Control button
Mode dial
MENU button
2048 4
2048 4
01cov.book Page 58 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
59
Advanced still image shooting
Shooting with the AF lock
using Center AF
If it is difficult to focus because the subject
is not in the center of the frame, you can
focus in this situation using the AF range
finder. For example, when you are shooting
two human subjects, and there is a gap
between them, the camera may focus on the
background visible in the gap. In a case like
this, use AF lock to ensure the subjects are
in correct focus.
When you are using AF lock, you can capture
an image with the correct focus even if the
subject is at the edge of the frame.
aCompose the shot so that the
subject is centered in the AF
range finder, and press the
shutter halfway down.
First, the focus for the subject you are
aiming at will be adjusted. When the
AE/AF lock indicator stops flashing
and remains on, and there is a beeping
sound, focus adjustment is completed.
bReturn to the fully composed
shot, and press the shutter
down again.
When you hear a beeping sound, the
image will be recorded with the proper
focus for the human subjects.
You can carry out the AF lock adjustment
process any number of times, as long as you do
it before you press the shutter.
2048
F5.6
500
4
AE/AF lock
indicator
AF range finder
2048
F5.6
500
4
01cov.book Page 59 Wednesday, May 22, 2002 3:40 PM
60
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Setting the distance
to the subject
– Focus preset
Mode dial: /SCN/
When shooting an image using a previously
set distance to the subject, or when shooting
a subject through a net or through window
glass, it is difficult to get the proper focus
using the auto focus function. This is when
use of the Focus preset is convenient.
aSet the mode dial to , SCN,
or .
bPress the MENU button.
The menu appears.
cSelect 9 (FOCUS) using b/B,
then select the distance to the
subject using v/V.
You can select from the following
distance settings.
0.5m, 1.0m, 3.0m, 7.0m, (unlimited
distance)
To return to auto focus
Press the MENU button again, select 9
(FOCUS), then select [MULTI AF] or
[CENTER AF].
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
The focus distance settings include a small
margin of error. Use them as guidelines only.
If you point the lens up or down, the error
increases (DSC-P71 only).
Adding special effects
– PICTURE EFFECT
Mode dial: /SCN/
You can add special effects to bring out the
contrast in your images.
Mode dial
Control button
MENU button
WB
FOCUS ISO
MULTI AF
CENTER AF
0.5m
1.0m
1.0m
3.0m
7.0m
SOLARIZE B&W
Like an illustration
with clearly delineated
bright and dark
portions
In black and white
SEPIA NEG.ART
Colored to look like an
old photograph Made to look like a
negative image
01cov.book Page 60 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
61
Advanced still image shooting
aSet the mode dial to , SCN,
or .
bPress the MENU button.
The menu appears.
cSelect [PFX] (P. EFFECT)
using b/B, then select the
desired mode using v/V.
To cancel Picture Effect
In Step 3, select [OFF]
Spot light-metering
Mode dial: /SCN/
When there is backlight, or the background
of the subject provides a very high contrast,
you can adjust the focus to that most
appropriate for your subject. You can aim at
a particular point, and meter the light to
adjust the focus for that point.
When the place you want to focus on and the
place you are using Spot light-metering on are
the same, it recommended that you use Center
AF (page 58).
For the DSC-P71
aSet the mode dial to , SCN,
or .
bPress the MENU button.
The menu appears.
cSelect (SPOT METER)
using b/B, then select [ON]
using v/V.
The Spot light-metering aiming point
is displayed.
dAim the Spot light-metering
aiming point at the spot you
want to shoot, then shoot your
image.
Shutter button
Mode dial
MENU button
Control button
2048 4
Spot light-
metering
aiming point
01cov.book Page 61 Wednesday, May 22, 2002 3:40 PM
62
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
To cancel Spot light-metering
Press the MENU button again, select
(SPOT METER) using b/B on the control
button, then select [OFF] using v/V. The
Spot light-metering aiming point
disappears, and the camera returns to
normal light-metering.
For the DSC-P51/P31
aSet the mode dial to , SCN,
or .
bPress B ( ) on the control
button to turn Spot light-
metering on.
The Spot light-metering aiming point
appears.
cAim the Spot light-metering
aiming point at the spot you
want to shoot, then shoot your
image.
To cancel Spot light-metering
Press B ( ) on the control button to turn
Spot light-metering off. The Spot light-
metering aiming point disappears, and the
camera returns to normal light-metering.
Shooting multiple
frames
– CLIP MOTION
Mode dial:
You can shoot a number of still images
consecutively (GIF animation). Because the
file size is small, these images are ideal for
use on a home page, or for attaching to an e-
mail message.
Clip Motion images are restricted to color
levels of 256 colors and below. This is a
characteristic of GIF format recording. For this
reason, the image quality of some images may
deteriorate.
NORMAL (160×120)
The maximum number of frames you can
shoot in one Clip Motion shot is ten. This is
the best choice for use on a home page.
MOBILE (120×108)
Two frames is the maximum number that
can be shot in Clip Motion in this mode.
MOBILE mode has strict file size limits, so
picture quality falls accordingly.
For the number of images you can record using
Clip Motion, see page 91.
01cov.book Page 62 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
63
Advanced still image shooting
Before using Clip Motion
In [MOVING IMAGE] in SET UP, select
[CLIP MOTION] (pages 55, 97).
aSet the mode dial to .
bPress the MENU button.
The menu appears.
cSelect (IMAGE SIZE) using
b/B, and select the desired
mode using v/V.
dShoot one frame.
eShoot the next frame.
Press the shutter once to shoot the next
frame, then repeat this operation until
you have shot the desired number of
frames.
fPress the center z.
All of the frames will be saved in the
“Memory Stick.
If you do not complete Step 6, the image will
not be saved in the “Memory Stick.” Up to that
point, the image is saved temporarily in the
camera.
In Clip Motion mode, the date and time will not
be recorded.
When you view Clip Motion images using the
Index screen, the images may appear different
from the actual image recorded.
GIF files made on other cameras may not
display correctly on this camera.
To delete shot images in the
midst of shooting
1In Steps 4 or 5 on the previous page,
press b (7)
Shot images will be played back in
order, playback stops when the last
image is reached.
2Press the MENU button, select either
[DELETE LAST], or [DELETE ALL],
and press the center z.
3Select [OK], then press the center z. If
you chose [DELETE LAST] in Step 2,
repeat Steps 1 to 3 to delete the images
in order, from the latest one shot.
Mode dial
Control button
Shutter button
MENU button
MAKING “CLIP MOTION”
2/10
CLIP 120
01cov.book Page 63 Wednesday, May 22, 2002 3:40 PM
64
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Shooting in Multi
Burst mode
– MULTI BURST
Mode dial:
Pressing the shutter once records 16 frames
in a row. This is convenient for checking
your form in sports, for example. You can
set the interval between frames using the
menu.
Before using Multi Burst
In [MOVING IMAGE] in SET UP, select
[MULTI BURST] (page 55).
aSet the mode dial to .
bPress the MENU button.
The menu appears.
cSelect (INTERVAL) using
b/B, then select the desired
between-frame interval using
v/V.
You can choose the between-frame
interval from among the following.
NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec.
PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec.
(For information on NTSC/PAL, see
page 95.)
dPress the shutter.
16 frames will be recorded as one
image (image size: 1280 × 960).
When you play back images recorded with this
camera in Multi Burst mode, the 16 frames are
played back in order, with a fixed interval
between them.
When the images are played back on a
computer, the 16 frames you shot are all
displayed at the same time as part of one image.
When Multi Burst images are played back on a
camera without the Multi Burst feature, the 16
frames are all displayed at the same time, as
part of one image, just as they are on a
computer.
For the number of images that can be recorded
using the Multi Burst mode, see page 91.
You cannot use the flash.
The date/time is not inserted.
Shutter button
Mode dial
Control button
MENU button
1/7.5
WB INTERVAL
1/30
1/15
1/7.5
01cov.book Page 64 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
65
Advanced still image shooting
Deleting shot images
When using this mode, you cannot delete
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
aSet the mode dial to .
bPress the MENU button and
select [DELETE] from the
menu, then press the center z.
cSelect [OK], and press the
center z.
All of the frames are deleted.
Shooting still images
for e-mail
– E-MAIL
Mode dial: /SCN
You can shoot images and save them in a
file that is small enough to attach to an e-
mail message (see page 24 for available file
sizes).
aSet the mode dial to , or
SCN.
bPress the MENU button.
The menu appears.
cSelect [MODE] (REC MODE)
using b/B, then select [E-
MAIL] using v/V.
dShoot your image.
To return to Normal mode
In Step 3, select [NORMAL].
For instructions on how to attach your images
to an e-mail message, refer to the Help files of
the e-mail software you are using.
Shutter button
Mode dial
Control button
MENU button
01cov.book Page 65 Wednesday, May 22, 2002 3:40 PM
66
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Enlarging a portion of
a still image
Mode dial:
You can enlarge an image up to five times
the size of the original image. You can also
record the enlarged image as a new file.
Enlarging an image Playback
zoom
aSet the mode dial to .
bDisplay the image you want to
enlarge.
cPress the T zoom button to
enlarge the image.
dPress the control button
repeatedly to select a portion
of the image to enlarge.
ePress the T zoom button
repeatedly, the portion of the
image selected in Step 4 will
be enlarged.
To cancel enlarged viewing
Press the center z.
You cannot use Playback zoom for movies
(MPEG MOVIE)/Clip Motion /Multi Burst
features.
If you press the W zoom button when you are
viewing images that have not been enlarged,
the Index screen will appear (page 37).
The images displayed in Quick Review
(page 27) can be enlarged using the procedures
outlined in Steps 3 to 5.
Mode dial
Zoom button
Control button
MENU button
Press v
Press V
Press
b
Press
B
v: To view a portion of the top of the
image
V: To view a portion of the bottom of
the image
b:To view a portion of the left side
of the image
B:To view a portion of the right side
of the image
Advanced still image viewing
01cov.book Page 66 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
67
Advanced still image viewing
Recording an enlarged
image – Trimming
aAfter you have viewed an
image using playback zoom,
press the MENU button.
bSelect [TRIMMING] using B,
then press the center z.
cSelect the image size using v/
V, then press the center z.
The image is recorded, and the screen
image returns to the size it was before
enlargement.
The trimmed image is recorded as the newest
file, and the original image is retained.
The trimmed image may suffer some
deterioration in image quality
You cannot trim an image using the 3:2 image
size.
Playing back
successive images
– SLIDE SHOW
Mode dial:
You can playback recorded images in
succession, one after another. This is useful
for checking your images, or for giving a
presentation.
aSet the mode dial to .
bPress the MENU button.
The menu appears.
cSelect [SLIDE] using b/B, and
press the center z.
Select an interval from those listed
below.
INTERVAL settings
3 sec/5 sec/10 sec/30 sec/1 min
REPEAT
ON:Plays the images back repeatedly.
OFF:Plays through the images one
time and then stops.
dSelect [START] using v/V/b/B,
then press the center z.
The slide show begins.
To cancel the slide show setting
In Step 3, select [CANCEL], then press
the center z.
Mode dial
Control button
MENU button
01cov.book Page 67 Wednesday, May 22, 2002 3:40 PM
68
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
To stop the playback of the slide
show
Press the center z, select [EXIT] using B,
then press the center z.
To fast forward or to go back to a
previous image during a slide
show
Press the B (Forward), or the b
(Backward).
The interval settings are just guidelines. The
actual intervals differ, based on factors like the
size of the image.
Rotating still images
– ROTATE
Mode dial:
Images shot when holding the camera
vertically can be rotated and displayed
horizontally.
aSet the mode dial to , and
display the image you want to
rotate.
bPress the MENU button.
The menu appears.
cSelect [ROTATE] using b/B,
then press the center z.
dSelect using
v/V
, and
rotate the image using b/B.
eSelect [OK] using v/V
, then
press the center z.
To cancel the rotation
In Step 4, select [CANCEL], then press
the center z.
Protected images (page 69)/movies (MPEG
MOVIE)/Clip Motion/Multi Burst images
cannot be rotated.
Images shot on other cameras may not rotate
correctly on this camera.
When viewing images on a computer, the
image viewing software used may not handle
the rotation information correctly.
01cov.book Page 68 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV02.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
69
Still image editting
Protecting images
– PROTECT
Mode dial:
To prevent accidental erasure of an
important image, you can protect it.
For single images
aSet the mode dial to .
bDisplay the image you want to
protect using b/B.
cPress the MENU button.
The menu appears.
dSelect [PROTECT] using b/B,
then press the center z.
The image currently being displayed is
now protected, and a - (Protect)
mark is shown on the screen.
To cancel the protection
In Step 4, press the center z again. The
- (Protect) mark disappears.
For Index (nine-image)
screen
aSet the mode dial to , press
the W zoom button once, the
Index (nine-image) screen
appears.
bPress the MENU button.
The menu appears.
cSelect [PROTECT] using b/B,
and press the center z.
dSelect [SELECT] using b/B,
and press the center z.
The frame around the selected image
turns green.
eSelect the image you want to
protect using b/B/v/V, and
press the center z.
A - (Protect) mark will be attached
to the selected image.
Mode dial
Control button
MENU button
8/8
2048
OK
PROTECT
SLIDEPRINTDELETE
TO NEXT
MENU
SET
Still image editting
01cov.book Page 69 Wednesday, May 22, 2002 3:40 PM
70
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV02.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
fTo protect other images,
repeat Step 5.
gPress the MENU button.
The menu appears.
hSelect [OK] using the B, then
press the center z.
The selected image is protected.
To end the protection operation
Select [CANCEL] in Step 4 or select
[EXIT] in Step 8, then press the center z.
To cancel the protection
In Step 5, using the control button, select
an image for which you want to cancel
protection, and press the center z. Repeat
this operation for all of the images for
which you want to cancel protection. Then,
press the MENU button, select [OK], and
press the center z.
To protect all of your images
In Step 4 select [ALL], and press the
center z. Then select [ON], and press the
center z.
To remove protection from all of
your images
In Step 4 select [ALL], and press the
center z. Then select [OFF], and press the
center z.
For Index (triple-image)
screen
aSet the mode dial to , press
the W zoom button twice, the
Index (triple-image) screen
appears.
bMove the image you want to
protect to the center using b/
B.
cPress the MENU button.
The menu appears.
dSelect [PROTECT] using v/V,
and press the center z.
The center image is protected, and a
- (Protect) mark will be attached to
that image.
eTo protect other images, move
the image you want to protect
to the center using b/B, and
repeat Step 4.
OK
10:30
PM
2002 7 4100-0005
PROTECT
PRINT
DELETE
01cov.book Page 70 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV02.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
71
Still image editting
To remove protection from
previously protected images
In Step 4, select the image from which
you want to remove protection, and press
the center z. To remove protection from all
of your images, repeat this process for each
of them.
Changing image size
– RESIZE
Mode dial:
You can change the size of your images,
and record them as new files.
You can change your images to the
following sizes.
2048×1536 (DSC-P71 only), 1600×1200,
1280×960, 640×480
After the resizing is finished, the original
image is retained.
aSet the mode dial to .
bSelect the image for which the
size is to be changed using b/
B.
cPress the MENU button.
The menu appears.
dSelect [RESIZE] using b/B,
then press the center z.
eUsing v/V, select the new size,
then press the center z.
The resized image is recorded as the
newest file.
To stop the resizing process
In Step 5, select [CANCEL], then press
the center z.
Movies (MPEG MOVIE)/Clip Motion/Multi
Burst images cannot be resized.
When images are resized from a smaller to a
larger size, the image quality will deteriorate.
3:2-sized images cannot be resized.
If you try to resize a 3:2-sized image, black
bands appears at the top and bottom of the
image.
Mode dial
Control button
MENU button
01cov.book Page 71 Wednesday, May 22, 2002 3:40 PM
72
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV02.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Choosing images to
print
– PRINT
Mode dial:
You can designate certain images to be
printed.
This is convenient when you want to have
images printed in shops that follow DPOF
(Digital Print Order Format) specifications.
Print marks cannot be attached to movies
(MPEG MOVIE) or images recorded using
Clip Motion.
In E-MAIL mode, the Print mark will be
attached to the normal size image that was
recorded at the same time.
You can attach a print mark to images shot
using Multi Burst mode; all the images will be
printed on one sheet divided into 16 panels.
For single images
aSet the mode dial to .
bDisplay the image you want to
print using b/B.
cPress the MENU button.
The menu appears.
dSelect [PRINT] using b/B, then
press the center z.
A (Print) mark appears on this
image.
To delete the Print mark
In Step 4, press the center z again. The
(Print) mark disappears.
For index (nine-image)
screen
aSet the mode dial to and
press the W zoom button once
to switch to the Index (nine-
image) screen.
bPress the MENU button.
The menu appears.
cSelect [PRINT] using b/B, then
press the center z.
dSelect [SELECT] using b/B,
then press the center z.
The frame of the selected image
changes to green.
You cannot select [ALL].
eSelect the images you want to
print using v/V/b/B, then
press the center z.
A (Print) mark appears on the
image.
8/8
2048
OK
DELETE
PROTECT
PRINT SLIDE
TO NEXT
MENU
SET
01cov.book Page 72 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\11ADV02.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
73
Still image editting
fTo print other images, repeat
Step 5 for each of them.
gPress the MENU button.
The menu appears
hSelect [OK] using B, then
press the center z.
The setting of the (Print) mark is
completed.
To delete a (Print) mark
To delete a (Print) mark, select an
image using v/V/b/B, and press the center
z.
To delete all the Print marks
attached to your images
In Step 4, select [ALL], then press the
center z. Next, select [OFF], and press the
center z.
To cancel the Print mark
In Step 4, select [CANCEL], or select
[EXIT] in Step 8, then press the center z.
For index (triple-image)
screen
aSet the mode dial to , press
the W zoom button twice, and
the Index (triple-image) screen
appears.
bDisplay the image you want to
print in the center using b/B.
cPress the MENU button.
The menu appears.
dSelect [PRINT] using v/V, then
press the center z.
A (Print) mark appears on the
image in the center.
eTo print other images, move
the image you want to print to
the center using b/B, and
repeat Step 4.
To delete a Print mark
In Step 4, press the center z again.
The (Print) mark disappears.
OK
10:30
PM
2002 7 4100-0005
PROTECT
PRINT
DELETE
01cov.book Page 73 Wednesday, May 22, 2002 3:40 PM
74
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Shooting movies
Mode dial:
You can shoot movies. Sound cannot be
recorded with movies.
Before starting
In [MOVING IMAGE] in SET UP, select
[MPEG MOVIE] (pages 55, 97).
aSet the mode dial to .
bPress the MENU button.
The menu appears.
cSelect (Image size) using b/
B, and select the desired mode
using v/V.
You can choose from 320 (HQX),
320×240, or 160×112.
See page 91 for the recording time
allowed for each screen size.
dPress the shutter all the way
down.
“RECORDING” appears on the screen
and the camera starts recording the
image.
When the capacity of the “Memory Stick”
is used up, recording stops.
For details on the recording time for
movies, see page 91.
ePress the shutter all the way
down again to stop recording.
The message displayed on the
screen while you are shooting
It is not written onto the image.
Each time you press the DISPLAY/LCD
ON/OFF button, the status of the LCD
screen changes as follows: Display OFF t
LCD OFF t Display ON. See page 104
for a detailed description of the indicated
items.
To shoot close-ups (MACRO)
(DSC-P71 only)
Set the mode dial to and follow the
procedure on page 28.
To shoot with a self-timer
Set the mode dial to and follow the
procedure on page 29.
You cannot use a flash.
The date/time is not inserted.
Mode dial
Control button
MENU button
DISPLAY/LCD ON/OFF button
^
140 0:01[ 5:28]
160
Enjoying movies
01cov.book Page 74 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
75
Enjoying movies
Viewing movies on
the LCD screen
Mode dial:
You can view movies on the LCD screen of
the camera.
aSet the mode dial to .
bSelect the desired movie using
b/B.
Movies are displayed a size smaller
than still images.
cPress the center z.
The movie is played back.
B (PLAYBACK) appears on the LCD
screen while a movie is playing back.
To stop playback
Press the center z.
To rewind / fast-forward
Press b/B while playing back a movie.
To return to the normal playback, press the
center z.
High quality movies
Movies with the image size “320 (HQX)”
appear on the full screen.
Messages displayed on the
screen while movies are being
played back
Each time you press the DISPLAY/LCD
ON/OFF button, the status of the LCD
screen changes as follows: Display OFF t
LCD OFF t Display ON. See page 105
for a detailed description of the indicated
items.
The procedure for viewing movies on a TV is
the same as that for viewing still images
(page 38).
PLAY
2002 7 4MOV00001 10:30
PM
FILE BACK/NEXT
8
/
8
0:00
160
STOP REV/CUE
2002 7 4MOV00001 10:30
PM
8/8
0:02
160
Playback bar
01cov.book Page 75 Wednesday, May 22, 2002 3:40 PM
76
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Deleting movies
Mode dial:
Deleting on the single
screen
aSet the mode dial to .
bSelect the movie you want to
delete using b/B.
cPress the MENU button.
The menu appears.
dSelect [DELETE] using b/B
and press the center z.
The movie has not yet been deleted at
this point.
eSelect [OK] using v and press
the center z.
“MEMORY STICK ACCESS”
appears on the screen.
The movie has been deleted when the
message disappears.
To cancel the deletion
Select [CANCEL] in Step 5, and press the
center z.
Deleting on the Index (nine-
image) screen
aSet the mode dial to and
press the W zoom button once
to display an Index (nine-
image) screen.
bPress the MENU button.
The menu appears.
cSelect [DELETE] using b/B
and press the center z.
dSelect [SELECT] using b/B
and press the center z.
eSelect the movie you want to
delete using v/V/b/B and
press the center z.
The (Delete) mark appears on the
selected movie.
You have not deleted the images yet at
this point.
Mode dial
Control button
MENU button
TO NEXT
MENU
SET
01cov.book Page 76 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
77
Enjoying movies
fRepeat Step 5 of the
procedure to delete other
movie.
gPress the MENU button.
The menu appears.
hSelect [OK] using b/B and
press the center z.
The movies are deleted when the
“MEMORY STICK ACCESS”
message disappears.
To cancel the deletion
Select [CANCEL] in Step 8, and press the
center z.
To delete all the movies
Select [ALL] in Step 4, and press the
center z. To cancel the deletion, select
[CANCEL] using b/B and press the center
z.
Deleting on the Index (triple-
image) screen
aSet the mode dial to and
press the W zoom button twice
to display an Index (triple-
image) screen.
bShow the desired movie at the
center using b/B.
cPress the MENU button.
The menu appears.
dSelect [DELETE] using V and
press the center z.
The movie has not yet been deleted at
this point.
eSelect [OK] using v and press
the center z.
The image has been deleted when the
“MEMORY STICK ACCESS”
message disappears.
To cancel the deletion
Select [CANCEL] in Step 5, and press the
center z.
OK
10:30
PM
2002 7 4MOV00005
O K
DELETE
CANCEL
01cov.book Page 77 Wednesday, May 22, 2002 3:40 PM
78
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Editing movies
Mode dial:
With the mode dial, you can cut movies, or
delete unnecessary portions of movies. This
is the recommended mode to use when the
“Memory Stick” capacity is insufficient, or
when you attach movies to your e-mail
messages.
The file numbers assigned when
movies are cut
The files saved after a movie cut are
recognized as the latest files and are
assigned new numbers. The original files
are deleted, and the numbers previously
assigned to those files are treated as missing
numbers.
<Example> Cutting a file numbered
MOV00002.MPG Cutting movies
aSet the mode dial to .
bSelect the movie you want to
cut using b/B.
cPress the MENU button.
The menu appears.
dSelect [DIVIDE] using B and
press the center z, and select
[OK] using v, then press the
center z.
The playback of the movie starts.
12
MOV00002.MPG
MOV00003.MPG
3
MOV00001.MPG
123AB
MOV00002.MPG
MOV00004.MPG
123 BA
MOV00005.MPG
13
2
MOV00006.MPG
MOV00004.MPG MOV00007.MPG
AB
13
2
MOV00006.MPG
1. Divide scene A.
3. Delete scene A and B if they are
unnecessary.
2. Divide scene B.
4. Only the desired scenes remain.
DIVIDE point
DIVIDE
point
DELETE DELETE
Mode dial
Control button
MENU button
01cov.book Page 78 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
79
Enjoying movies
eDecide on a cutting point.
Press the center z at the desired
cutting point.
When you want to adjust the cutting
point, use [c/C] (frame forward/
rewind) and adjust the cutting point
using b/ B. If you want to change the
cutting point, select [CANCEL]. The
playback of the movie starts again.
fWhen you have decided on a
cutting point, select [OK]
using v/V, and press the
center z.
gSelect [OK] using v and press
the center z.
The movie is cut.
To cancel cutting
Select [EXIT] in Step 5. The movie
appears on the screen again.
You cannot cut the following files.
Clip Motion files
Multi Burst files
Still image files
Files not long enough to cut
Protected movies files
You cannot restore files once you cut them.
The original file is deleted when you cut it.
Deleting unnecessary
portions of a movie
aCut an unnecessary portion of
a movie (see the previous
page).
bDisplay the portion of the
movie you want to delete.
cPress the MENU button.
The menu appears.
dSelect [DELETE] using b/ B
and press the center z.
eSelect [OK] using v and press
the center z.
The movie currently displayed on the
screen is deleted.
OK
DIVIDE
8
/
8
0:04
160
CANCEL
O K
DIVIDING
POINT
EXIT
c C
01cov.book Page 79 Wednesday, May 22, 2002 3:40 PM
80
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Copying movies to
your computer
Follow the steps below to copy movies you
shot to your computer.
Before starting
1Install the USB driver.
2Insert the “Memory Stick” on which the
movies are stored, into your camera.
Then, turn on the camera.
3Connect the camera to your computer.
For details, see page 44.
Step 1 is unnecessary when your OS is
Windows XP, Mac OS 9.1, Mac OS 9.2,
or Mac OS X(v10.0/v10.1).
For Windows 98, 98SE, 2000,
Me users
aDouble-click (My
Computer), then double-click
(Removable Disk).
The contents of the “Memory Stick”
inserted into your camera appear.
This section describes an example of
copying movies into the “My
Documents” folder.
bDouble-click (MSSONY),
then double-click
(MOML0001).
The “MOML0001” folder opens.
cDrag and drop the movie files
into the “My Documents
folder.
The movie files are copied to the “My
Documents” folder.
For Windows XP users
aOn the Copy Wizard screen,
click [Copy images to a folder
on the computer. Use the
Microsoft Scanner and Camera
Wizard], then click [OK].
The “Scanner and Camera Wizard
window appears.
bClick [Next].
All of the movies recorded in the
“Memory Stick” appears on the screen.
cClick to remove the
checkmark from any movies
you do not want to copy to the
computer, then click [Next].
The “Picture Name and Destination”
window appears.
dSpecify the movie file names
to be copied and the copy
destination, then click [Next].
The copying of your movies starts.
When the task is completed, the “Other
Options” window appears.
Copy movies into the “My
Documents” folder.
01cov.book Page 80 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\12ADV.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
81
Enjoying movies
eClick [Nothing. I’m finished
working with these pictures],
then click [Next].
The “Completing the Scanner and
Camera Wizard” window appears.
fClick [Finish].
The Wizard window closes.
When you want to continue copying
other movies, disconnect the USB
cable once and reconnect it. Then,
follow the process from Step 1.
For Macintosh users
1Double-click the newly recognized icon
on the desktop.
The contents of the “Memory Stick”
inserted into your camera appear.
2Double-click [MSSONY].
3Double-click [MOML0001].
4Drag and drop the movie files to the hard
disk icon.
The movie files are copied to your hard
disk.
To copy movie files using
“ImageMixer”
You can copy movie files using the supplied
“PIXELA ImageMixer for Sony” software.
The operation is the same as the operation
used to copy still images. For details, see
the software’s help files.
01cov.book Page 81 Wednesday, May 22, 2002 3:40 PM
82
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Troubleshooting
If you have trouble with your camera, try
the following solutions.
1Check the items on pages 82 to 88. If the
screen or the display window
shows “C:ss:ss”, the self-
diagnostics function is working.
Please see page 90.
2Press the RESET button (pages 9, 11,
13) on the bottom of the camera with a
pointed object, then turn on the power
again. (This will erase the date/time
settings, etc.)
3Consult your Sony dealer or local
authorized Sony service facility.
Batteries and Power
RESET button
Symptom Cause Solution
The battery remaining
indicator is incorrect. Or
the sufficient battery
remaining indicator is
displayed but the power
soon runs out.
You have used the camera for a long time in an
extremely hot or an extremely cold location.
The batteries are dead (page 101).
The batteries are discharged.
A mismatch has occurred in the remaining
battery time information.
pReplace the batteries with a new one.
pInstall a charged batteries (page 14).
pFully charge the batteries (page 15).
The battery runs down too
quickly. You are recording/playing back images in an
extremely cold location.
The batteries are not charged enough.
The batteries are dead (page 101).
pFully charge the batteries (page 14).
pReplace the batteries with a new one.
The power cannot be
turned on. The batteries are not installed correctly.
The AC power adaptor is disconnected. pInstall the batteries correctly (page 17).
pConnect it securely to your camera (page 19).
The power turns off
suddenly. If you do not operate the camera for about 90
seconds while the power is on, the camera turns
off automatically to prevent wearing down the
battery (when [POWER SAVE] is [OFF], after
three minutes.) (page 20).
The batteries are discharged.
pTurn on the power again (page 20).
pReplace it with a charged battery (page 14).
Troubleshooting
01cov.book Page 82 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
83
Troubleshooting
Shooting Still images/Movies
Symptom Cause Solution
The LCD screen does not
light when the power is
turned on.
The power was turned off with the LCD screen
set to [OFF] the last time the camera was used. pTurn the LCD screen [ON] (page 32).
The subject is not visible
on the LCD screen. The mode dial is not set to or SCN, or . pSet it to or SCN, or (pages 26, 74).
The image is out of focus. The subject is too close.
Scene selection is set to the Landscape mode.
You have selected Focus Preset.
Center AF is selected.
pSet the macro recording mode (DSC-P71 only) when you shoot
a subject that is within 50 cm (19 11/16 inches) from the lens.
Make sure to place the lens farther away from the subject than
the shortest shooting distance when shooting (page 28).
pChange to a different mode (page 34).
pChoose a focus method (page 58).
pUse either the Multipoint AF (page 58) or Center AF to shoot
with AF lock (page 59).
Unable to zoom. You cannot zoom while shooting a movie
(MPEG MOVIE) (DSC-P71/P31 only).
Digital zoom does not
function. You cannot zoom while shooting a movie
(MPEG MOVIE).
[DIGITAL ZOOM] is set to [OFF] in SET UP
(DSC-P71/P51 only).
The LCD screen is OFF.
pChange it to [ON] (pages 55, 97).
pTurn it ON (page 32).
The image is too dark. You are shooting a subject with a light source
behind the subject.
The brightness of the LCD screen is too low.
The POWER SAVE is set to ON.
pAdjust the exposure (page 56).
pAdjust the brightness of the LCD screen in the SET UP settings
(pages 55, 98).
pTurn the POWER SAVE to OFF (page 16).
The image is too bright. You are shooting under a spotlight in a dark
location, like stage lighting.
The LCD is too bright.
pAdjust the exposure (page 56).
pAdjust the [LCD BACKLIGHT] in the SET UP settings (pages
55, 98).
The image is
monochrome (black and
white).
[P. EFFECT] is set to [B&W] mode. pCancel [B&W] mode (page 60).
01cov.book Page 83 Wednesday, May 22, 2002 3:40 PM
84
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Vertical streaks appear
when you are shooting a
very bright subject.
The smear phenomenon is occurring. pThis is not a malfunction.
You cannot shoot images. No “Memory Stick” has been inserted.
The capacity of the “Memory Stick” is full.
The write-protect tab on the “Memory Stick” is
set to the LOCK position.
You cannot shoot while the flash is charging.
The mode dial is not set to or SCN while
shooting a still image.
The mode dial is not set to when shooting a
moving picture.
pInsert a “Memory Stick” (page 23).
pDelete the images saved in the “Memory Stick,” or format it.
pChange the “Memory Stick.”
pChange the LOCK position (page 100).
pSet it to or SCN (page 26).
pSet it to (page 74).
Cannot record images
with the flash. The mode dial is set to , SET UP, or .
The flash is set to (No flash).
When recording still images, Scene Selection is
set to Twilight mode.
pSet it to a setting other than , SET UP, or (page 30).
pSet the flash to “AUTO” (no indicator) or (forced flash)
(page 30).
pCancel the setting (page 34).
The eyes of the subject
come out red. pSet the red eye reduction mode (page 31).
The date and time are
recorded incorrectly. The date and time are not set correctly. pSet the correct date and time. (page 21)
Symptom Cause Solution
01cov.book Page 84 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
85
Troubleshooting
Viewing images
Deleting/Editing an image
Symptom Cause Solution
The image cannot be
played back. The mode dial is not set to .
When you load an image modified using the
retouch software on your computer or directly
on the camera, the image format differs so the
“FILE ERROR” message may appear and you
may be unable to open the file.
pSet the mode dial to (page 36).
Images are coarse right
after being played back. pThis is not a malfunction.
The images cannot be
played back on a TV. The [VIDEO OUT] setting for your camera in
SET UP is incorrect.
The connection is not correct.
pSet it to [NTSC] or [PAL] (pages 55, 98).
pCheck the connection (page 38).
The images cannot be
played back on a personal
computer.
pSee page 86.
Symptom Cause Solution
Your camera cannot
delete an image. The image is protected.
The write-protect tab on the “Memory Stick” is
set to the LOCK position.
pCancel the protection (page 69).
pChange the LOCK position (page 100).
You have deleted the
image by mistake. Once you have deleted a file, you cannot restore
it. pThe write-protect tab on the “Memory Stick” will prevent you
from deleting images by mistake (page 69).
The resizing function
does not work. Movies (MPEG MOVIE)/Clip Motion/Multi
Burst images cannot be resized.
You cannot display a print
mark. You cannot display print marks on Clip Motion
images and MPEG movies.
01cov.book Page 85 Wednesday, May 22, 2002 3:40 PM
86
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Computers
Symptom Cause Solution
You do not know the OS of
your computer. pCheck “Recommended computer environment” (page 44).
You cannot install the
USB driver. pIn Windows 2000, log on as Administrators (page 45).
Your personal computer
does not recognize your
camera.
The camera is turned off.
The battery level is too low.
You are not using the supplied USB cable.
The USB cable is not connected securely.
[USB CONNECT] is set to [PTP] in the SET UP
settings.
The USB connectors on your personal computer
are connected to other equipment besides the
keyboard, the mouse, and your camera.
The USB driver is not installed.
Your computer does not properly recognize the
device because you connected the camera and
your computer with the USB cable before you
installed the “USB Driver” from the supplied
CD-ROM.
pTurn on the camera (page 20).
pUse the AC power adaptor (not supplied) (page 19).
pUse the supplied USB cable (page 47).
pDisconnect the USB cable, and connect it again securely. Make
sure that “USB MODE” is displayed on the LCD screen
(page 47).
pSet it to [NORMAL] (pages 55, 98).
pDisconnect the USB cables except for those connected to the
keyboard, the mouse, and your camera.
pInstall the USB driver (page 45).
pDelete the erroneously recognized device from your computer,
then install the USB driver (pages 45, 49).
You cannot copy images. The camera is not correctly connected to your
computer.
The copy procedure differs depending on your
OS.
pConnect the camera and your computer correctly using the USB
cable.
pFollow the copy procedure that your OS suggests (pages 48, 49,
54).
pIf you are using the “PIXELA ImageMixer for Sony” software,
click on HELP.
The image cannot be
played back on a
computer.
pIf you are using the “PIXELA ImageMixer for Sony” software,
click on HELP.
pConsult the computer or software manufacturer.
01cov.book Page 86 Wednesday, May 22, 2002 3:40 PM
87
Troubleshooting
Computers (continued)
“Memory Stick”
Symptom Cause Solution
The image is affected by
noise when you play back
an image on a computer.
You are playing back the file directly from the
“Memory Stick.”
pCopy the file to the hard disk of the computer and then play the
file back from the hard disk (page 80).
You cannot print an
image. pCheck the printer settings.
pClick on HELP files for the “PIXELA ImageMixer for Sony”
software.
An error message appears
when you insert the
supplied CD-ROM in your
computer.
The computer display is not set correctly. pSet the computer display as follows:
Windows: 800×600 dots or higher
High Color (16-bit, 65 000 colors) or more
Macintosh: 800×600 dots or higher
32 000-color mode or higher
Symptom Cause Solution
You cannot insert a
“Memory Stick.” You are inserting it backwards. pInsert it from the right side (page 23).
You cannot record on a
“Memory Stick.” The write-protect tab on the “Memory Stick” is
set to the LOCK position.
The “Memory Stick” is full.
pChange the LOCK position (page 100).
pDelete unnecessary images (page 39).
You cannot format a
“Memory Stick.” The write-protect tab on the “Memory Stick” is
set to the LOCK position.
pChange the LOCK position (page 100).
You have formatted a
“Memory Stick” by
mistake.
All the images on the “Memory Stick” are
deleted by formatting, and they cannot be
recovered.
pSet the “Memory Stick” write-protect tab to the LOCK position
(page 100) to prevent formatting it by mistake.
88
Others
Symptom Cause Solution
The camera doesn’t work,
no operations can be
performed.
The battery level is low or zero (The
indicator appears.).
The AC power adaptor is not connected
securely.
The built-in microcomputer is not working
properly.
pCharge the battery (page 14).
pConnect it securely to the DC IN jack of your camera and to a
wall outlet (mains) (page 19).
pDisconnect, and then, after one minute, reconnect all power
sources. Then turn the power on and check that the camera
works properly.
The power is on, but the
camera does not work. The built-in microcomputer is not working
properly.
pRemove, and then, after one minute, reinstall the battery. If this
doesn’t work, press the RESET button on the bottom of the
camera with a pointed object, then turn the power on again.
(This will clear the date/time settings, etc.)
You cannot identify the
indicator on the LCD
screen.
pCheck the indicator (pages 103 to 105).
The lens does not move
when you turn off the
camera. (DSC-P71 only)
The battery pack is discharged. pReplace it with a charged battery or use the AC power adaptor
(not supplied) (pages 14, 17, 19).
The lens gets fogged. Condensation is occurring. pLeave the camera for about an hour and then try to use it again
(page 99).
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
89
Troubleshooting
Warnings and
messages
The following messages appear on the LCD screen.
Message Meaning/ Corrective Action
NO MEMORY STICK Insert a “Memory Stick” (page 23).
SYSTEM ERROR Turn the power off and on again (page 20).
MEMORY STICK ERROR The inserted “Memory Stick” cannot be used in your camera (page 100).
The “Memory Stick” is damaged, or the terminal section of the “Memory Stick” is dirty.
Insert the “Memory Stick” correctly (page 23).
FORMAT ERROR The “Memory Stick” format failed. Format the “Memory Stick” again (page 43).
MEMORY STICK LOCKED The write-protect tab on the “Memory Stick” is set to the LOCK position. Move it to the recording/UNLOCK
position (page 100).
NO MEMORY SPACE The capacity of the “Memory Stick” is full. You cannot record images. Delete unnecessary images (page 39).
NO FILE No images have been recorded on the “Memory Stick.”
FILE ERROR An error occurred while playing back the image.
FILE PROTECT The image is protected against erasure.
FOLDER ERROR A folder with the same name already exists on the “Memory Stick.”
IMAGE SIZE OVER You are playing back an image of a size that cannot be played back on your camera.
INVALID OPERATION You are playing back a file that was created on equipment other than this camera.
The battery level is low or zero. Charge the battery (page 14). Depending on the conditions of use or the type of
battery, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left.
CAN NOT DIVIDE The file is not long enough to be divided.
The file is not a moving image.
You are not holding the camera steadly enough. Use the flash, mount the camera on a tripod, or otherwise secure
the camera in place.
TURN THE POWER OFF AND
ON AGAIN A problem with the lens caused an error.
01cov.book Page 89 Wednesday, May 22, 2002 3:40 PM
90
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\13TRB.FM]
masterpage:L1adv-Left-03
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Self-Diagnostics
Display
– When a message starting with a
letter of the alphabet appears
Your camera has a self-diagnostics display.
This function displays the condition of the
camera on the LCD screen using a
combination of a letter and four numerical
digits. If this occurs, check the following
code chart and take the corresponding
countermeasure. The last two digits
(indicated by ss)will differ depending on
the state of the camera.
C:32:ss
Self-diagnostics display
If your camera is not still functioning well
after trying the countermeasure a couple of
times, contact your nearest Sony service
station and inform them of the 5-digit
displayed code.
Example: E:61:10
Code Cause Countermeasure
C:32: ss There is trouble with your
camera’s hardware, or with the
zoom function.
Turn the power off and on again
(page 20).
C:13: ss The camera cannot read or write
data on the “Memory Stick.” Re-insert the “Memory Stick” several
times.
An unformatted “Memory Stick”
has been inserted. Format the “Memory Stick”(page 43).
The inserted “Memory Stick”
cannot be used with your camera,
or the data is damaged.
Insert a new “Memory Stick” (page 23).
E:61: ss
E:91: ss
E:92: ss
A camera malfunction that you
cannot reverse has occurred. Press the RESET button (pages 9, 11, 13)
on the bottom of the camera, then turn the
power on again.
01cov.book Page 90 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
91
Additional information
The number of images
that can be saved/
shooting time
The number of images that can be saved and
the shooting time are different, depending
on the capacity of the “Memory Stick,” the
image size, and the image quality. Refer to
the following charts when you choose a
“Memory Stick.”
The number of images is listed in FINE
(STANDARD) order.
The values for the number of images that
can be saved and the shooting time may
vary, depending on the shooting
conditions.
For normal shooting times and numbers
of images that can be saved, see page 25.
E-mail (Units: images)
Clip Motion (Units: images)
Normal: When 10 frames are shot
Mobile: When 2 frames are shot
MPEG movies (Units: seconds)
Multi Burst (Units: images)
8M 16M 32M 64M 128M
2048×1536
(DSC-P71)
4
(8) 9
(17) 20
(36) 40
(72) 80
(146)
2048 (3:2)
(DSC-P71)
4
(8) 9
(17) 20
(36) 40
(72) 80
(146)
1600×1200
8
(14) 16
(28) 32
(59) 64
(118) 128
(236)
1600 (3:2)
(DSC-P51/
P31)
8
(14) 16
(28) 32
(59) 64
(118) 128
(236)
1280×960
12
(21) 24
(42) 48
(88) 96
(176) 192
(352)
640×480
43
(95) 87
(192) 177
(390) 357
(786) 714
(1572)
8M 16M 32M 64M 128M
Normal 40 80 160 320 640
Mobile 300 450 900 1800 3600
8M 16M 32M 64M 128M
320 (HQX)
20 40 85 170 340
320×240
80 160 340 680 1360
160×112
320 640 1300 2700 5400
8M 16M 32M 64M 128M
1280×960
12
(22) 24
(44) 50
(93) 100
(186) 200
(372)
Additional information
01cov.book Page 91 Wednesday, May 22, 2002 3:40 PM
92
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Menu items
Menu items that can be changed differ
depending on the position of the mode dial.
The LCD screen shows only the items you
can operate based on the current position of
the mode dial. Factory settings are indicated
with x.
When the mode dial is set to , SCN
Item Setting Description
SCN x / / Selects one of the scene selections. (In mode, this setting cannot be carried out.)
(page 34)
(EV) +2.0EV / +1.7EV / +1.3EV /
+1.0EV / +0.7EV / +0.3EV /
x0EV / 0.3EV / 0.7EV /
1.0EV / 1.3EV / 1.7EV /
2.0EV
Adjusts the exposure (page 56).
9 (FOCUS) / 7.0 m / 3.0 m / 1.0 m / 0.5 m /
CENTER AF / x MULTI AF Chooses the auto focus method. Sets the focus distance using focus preset (pages 58,
60)
WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57)
(SPOT METER)
(DSC-P71 only) ON / x OFF To match the exposure to the subject you want to shoot (page 61).
ISO 400 / 200 / 100 / xAUTO Selects the ISO sensitivity. When recording under dark conditions or recording a fast-
moving subject, use a high-number setting. When recording high-quality images, use
a low-number setting (except when the Mode dial is set to SCN).
(IMAGE SIZE)
(DSC-P71) x2048×1536 / 2048 (3:2)/
1600×1200 / 1280×960 / 640×480 Selects the image size used when shooting still pictures (page 24).
(IMAGE SIZE)
(DSC-P51/P31) x1600×1200 / 1600 (3:2) /
1280×960 / 640×480 Selects the image size used when shooting still pictures (page 24)
01cov.book Page 92 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
93
Additional information
When the mode dial is set to , SCN. (continued)
When the mode dial is set to (MOVING IMAGE is set to MPEG MOVIE in the SET UP settings.)
Item Setting Description
(P.QUALITY) xFINE / STANDARD Records images with fine image quality mode / Records images in the standard image
quality mode (page 24).
MODE(REC MODE) E-MAIL
xNORMAL
Records a small-size (320×240) JPEG file in addition to the selected image size
(page 65).
Records an image using the normal recording mode.
(FLASH LEVEL) HIGH
xNORMAL
LOW
Makes the flash level higher than normal.
Normal setting.
Makes the flash level lower than normal.
PFX (P.EFFECT) SOLARIZE/B&W/SEPIA/
NEG.ART/xOFF Sets the special effects for the image (page 60).
(SHARPNESS) +2 / +1 / x0 / –1 / –2 Adjusts the sharpness of the image. The indicator appears (except when the
setting is 0).
Item Setting Description
(EV) +2.0EV / +1.7EV / +1.3EV /
+1.0EV / +0.7EV / +0.3EV /
x0EV / 0.3EV / 0.7EV /
1.0EV / 1.3EV / 1.7EV /
2.0EV
Adjusts the exposure (page 56).
9 (FOCUS) / 7.0 m / 3.0 m / 1.0 m / 0.5 m /
CENTER AF / x MULTI AF Chooses the auto focus method, set the focus preset distance (pages 58, 60).
WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57).
(SPOT METER)
(DSC-P71 only) ON / x OFF To match the exposure to the subject you want to shoot (page 61).
(IMAGE SIZE) 320(HQX)/ 320×240/ x160×112 Selects the MPEG image size when recording movies (page 74).
PFX (P.EFFECT) SOLARIZE/B&W/SEPIA/
NEG.ART/xOFF Sets the special effects for the image (page 60).
01cov.book Page 93 Wednesday, May 22, 2002 3:40 PM
94
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
When the mode dial is set to (MOVING IMAGE is set to CLIP MOTION in the SET UP settings.)
Item Setting Description
(EV) +2.0EV / +1.7EV / +1.3EV /
+1.0EV / +0.7EV / +0.3EV /
x0EV / 0.3EV / 0.7EV /
1.0EV / 1.3EV / 1.7EV /
2.0EV
Adjusts the exposure (page 56).
9 (FOCUS) / 7.0 m / 3.0 m / 1.0 m / 0.5 m /
CENTER AF / x MULTI AF Chooses the auto focus method, set the focus preset distance (pages 58, 60).
WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57).
(SPOT METER)
(DSC-P71 only) ON / x OFF To match the exposure to the subject you want to shoot (page 61).
(IMAGE SIZE) xNORMAL/ MOBILE Selects the Clip Motion image size (page 62).
± (FLASH LEVEL) HIGH
xNORMAL
LOW
Makes the flash level higher than normal.
Normal setting.
Makes the flash level lower than normal.
PFX (P.EFFECT) SOLARIZE/B&W/SEPIA/
NEG.ART/xOFF Sets the special effects for the image (page 60).
(SHARPNESS) +2/ +1/ x0/ –1/ –2 Adjusts the sharpness of the image. The indicator appears (except when the
setting is 0).
01cov.book Page 94 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
95
Additional information
When the mode dial is set to (MOVING IMAGE is set to Multi Burst in the SET UP settings)
Item Setting Description
(EV) +2.0EV / +1.7EV / +1.3EV /
+1.0EV / +0.7EV / +0.3EV /
x0EV / 0.3EV / 0.7EV /
1.0EV / 1.3EV / 1.7EV /
2.0EV
Adjusts the exposure (page 56).
9 (FOCUS) / 7.0 m / 3.0 m / 1.0 m / 0.5 m /
CENTER AF / x MULTI AF Chooses the auto focus method, set the prefocus distance (pages 58, 60).
WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57).
(
SPOT METER)
(DSC-P71 only) ON / x OFF To match the exposure to the subject you want to shoot (page 61).
(INTERVAL) x1/30 / 1/15 / 1/7.5 (NTSC)
x1/25 / 1/12.5 / 1/6.3 (PAL) In NTSC mode, choose the Multi Burst between-frame shutter interval.
In PAL mode, choose the Multi Burst between-frame shutter interval.
* The choices of between-frame shutter interval change depending on the setting
of the [VIDEO OUT] item in SET UP (page 98).
(P.QUALITY) xFINE / STANDARD Records images with fine/high image quality. / Records images in the standard image
quality mode (page 24).
PFX (P.EFFECT) SOLARIZE/B&W/SEPIA/
NEG.ART/xOFF Sets the special effects for the image (page 60).
(SHARPNESS) +2/ +1/ x0/ –1/ –2 Adjusts the sharpness of the image. The indicator appears (except when the
setting is 0).
01cov.book Page 95 Wednesday, May 22, 2002 3:40 PM
96
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
When the mode dial is set to
Item Setting Description
DELETE OK
CANCEL Deletes the displayed image (page 39).
Cancels deleting of the image.
PROTECT Protects images against accidental erasure (page 69).
PRINT Selects still images you want to print. (page 72).
SLIDE INTERVAL
REPEAT
START
CANCEL
Sets the slide show interval. (For single images only.)
x3 sec/ 5sec/ 10sec/ 30sec/ 1min
Plays the slide show over and over again
xON/OFF
Starts the slide show
Cancels the settings and execution of the slide show
RESIZE 2048×1536 (DSC-P71) /
1600×1200/1280×960/ 640×480/
CANCEL
Changes the recorded image size (page 71). (For single images only.)
ROTATE (counter-clockwise) /
(clockwise) / OK / CANCEL Rotates the still image (page 68). (For single images only.)
DIVIDE OK / CANCEL Divides a moving image (page 78). (For single images only.)
01cov.book Page 96 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Right-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
97
Additional information
SET UP items
CAMERA
SETUP 1
Item Setting Description
MOVING IMAGE xMPEG MOVIE / CLIP MOTION
/ MULTI BURST Selects the shooting mode (pages 55, 62, 64, 74).
DATE/TIME DAY & TIME / DATE / xOFF Selects whether to insert the date and time into the image (page 32).
DIGITAL ZOOM (DSC-
P71/P51) xON / OFF Selects whether to use the digital zoom (page 28).
RED EYE REDUCTION ON / xOFF Reduces the red-eye phenomenon when using a flash (page 31).
AF ILLUMINATOR xAUTO / OFF Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus
on the subject under dark lighting (page 31).
Item Setting Description
FORMAT OK / CANCEL Formats the “Memory Stick”. Please note that formatting erases all the information recorded on a
“Memory Stick”, including even erasure protected images (page 43).
FILE NUMBER x SERIES
RESET Assigns numbers to files in sequence even if the “Memory Stick” is changed.
Resets the file numbering and starts from 0001 each time the “Memory Stick” is changed.
/ LANGUAGE x ENGLISH
/ JPN
Displays the menu items, warnings and messages in English.
Displays the menu items, warnings and messages in Japanese.
CLOCK SET OK / CANCEL Sets the date and time (page 21).
Set the mode dial to SET UP. The setup
screen appears.
Factory settings are indicated with x.
When shooting movies/Clip Motion/Multi
Burst, the date and time cannot be inserted
in the image. Also, the date and time will
not be displayed when shooting. The date
and time will be displayed when the image
is played back.
01cov.book Page 97 Wednesday, May 22, 2002 3:40 PM
98
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:L1adv-Left-04
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
SETUP 2
Item Setting Description
LCD
BRIGHTNESS BRIGHT/
xNORMAL/ DARK Selects the LCD brightness. This has no effect on the recorded images.
LCD BACKLIGHT BRIGHT/
xNORMAL Selects the brightness of the LCD backlight. Selecting “BRIGHT” makes the screen bright and easy to
see when using the camera outdoors or in other bright locations, but also uses up the battery charge
faster. Displayed only when you are using your camera with the batteries and the POWER FUNCTION
is set to OFF.
BEEP SHUTTER
x ON
OFF
Turns on the shutter sound when you release the shutter button.
Turns on the beep/shutter sound when you press the control button/ release the shutter button.
Turns off the beep/shutter sound.
VIDEO OUT NTSC
PAL Sets the video output signal to [NTSC] mode (Japan, USA).
Sets the video output signal to [PAL] mode (Europe).
USB CONNECT PTP/xNORMAL Switches the USB mode (page 44).
POWER SAVE
(DSC-P71) x ON / OFF Selects whether to use the [POWER SAVE] mode (page 16).
01cov.book Page 98 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
99
Additional information
Precautions
Cleaning
Cleaning the LCD screen
Clean the screen surface with an LCD
cleaning kit (not supplied) to remove
fingerprints, dust, etc.
Cleaning the lens
Wipe the lens with a soft cloth to remove
fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth
slightly moistened with water, then wipe
the surface with a dry cloth. Do not use any
type of solvent such as thinner, alcohol or
benzine as this may damage the finish or the
casing.
Note on operating temperature
The camera is designed for use within a
temperature range of 0° to 40° (32°F to
104°F). Shooting in extremely cold or hot
locations that exceed this range is not
recommended.
On moisture condensation
If the camera is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. This moisture
condensation may cause a malfunction of
the camera.
Moisture condensation occurs easily
when:
The camera is brought from a cold
location such as a ski slope into a warmly
heated room.
The camera is taken from an air-
conditioned room or car interior to the hot
outdoors, etc.
To prevent moisture condensation
When bringing the camera from a cold
place to a warm place, seal the camera in a
plastic bag and leave it in the new location
for about an hour. Remove the plastic bag
when the camera has adapted to the new
temperature.
If moisture condensation occurs
Turn off the camera and wait about an hour
for the moisture to evaporate. Note that if
you attempt to shoot with moisture
remaining inside the lens, you will be
unable to record clear images.
The internal rechargeable button
battery
This camera has an internal rechargeable
button battery for maintaining the date and
time and other settings regardless of
whether the power is on or off.
This rechargeable button battery is
continually charged as long as you are using
the camera. However, if you use the camera
for only short periods it discharges
gradually, and if you do not use the camera
at all for about one month it becomes
completely discharged. In this case, be sure
to charge this rechargeable button battery
before using the camera.
Note that even if this rechargeable button
battery is not charged, you can still use the
camera as long as you do not record the date
and time.
Charging the battery
Connect the camera to a wall outlet (mains)
using the AC power adapter or install a
charged battery pack, and leave the camera
for 24 hours or more with the POWER
button set to OFF.
01cov.book Page 99 Wednesday, May 22, 2002 3:40 PM
100
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
The “Memory Stick”
“Memory Stick” is a new compact, portable
and versatile IC recording medium with a
data capacity that exceeds the capacity of a
floppy disk.
There are two types of “Memory Stick”: an
ordinary “Memory Stick” and a
“MagicGate Memory Stick” that are
equipped with the MagicGate copyright
protection technology. You can use both
types of “Memory Stick” with your camera.
However, because your camera does not
support the MagicGate standards, data
recorded with your camera is not subject to
MagicGate* copyright protection.
*MagicGate is copyright protection technology
that uses encryption technology.
You cannot record or delete images when the
write-protect tab is set to LOCK. The position
or the shape of the write-protect tab may differ
depending on the “Memory Stick” you use.
Do not remove the “Memory Stick” while
reading or writing data.
Data may be damaged in a location subject to
the effects of static electricity or noise.
Do not attach any other material than the
supplied label on the labeling position.
When you carry or store the “Memory Stick,
put it in the case supplied with it.
Do not touch the terminals of a “Memory
Stick” with your hand or a metal object.
Do not strike, bend or drop a “Memory Stick.
Do not disassemble or modify a “Memory
Stick.
Do not expose the “Memory Stick” to water.
The nickel hydride
batteries
Effective use of the battery
Battery performance decreases in low-
temperature surroundings, and the battery
life is shortened under such
circumstances. To use the battery longer,
we recommend you keep the battery
stored in the supplied battery case, in a
pocket close to your body to warm it, and
insert it in your camera just before you
start shooting.
If you use the LCD screen or shoot a lot
using the zoom, the battery power will be
used up faster.
We recommend having spare batteries
handy for two or three times the expected
shooting time, and try test shooting
before the actually using the camera.
Do not expose the battery to water. The
battery is not water-resistant.
Connector
Write-protect
tab
Labeling position
01cov.book Page 100 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
101
Additional information
Battery life
The battery life is limited. Battery
capacity decreases little by little as you
use it more and more, and as time passes.
When the battery operating time seems to
have been considerably shortened, a
probable cause is that the battery pack has
reached the end of its life.
The battery life varies depending on
storage, operating conditions, and
environment, and is different for each
battery pack.
Specifications
System
Image device DSC-P71
8.93mm (1/1.8 type) color
CCD
Primary color filter
DSC-P51
6.64 mm(1/2.7 type) color
CCD
Primary color filter
DSC-P31
6.64 mm(1/2.7 type) color
CCD
Primary color filter
Total pixels number of camera
DSC-P71
Approx. 3 300 000 pixels
DSC-P51
Approx. 2 100 000 pixels
DSC-P31
Approx. 2 100 000 pixels
Lens DSC-P71
3× zoom lens
f=8 to 24.0 mm (35 mm camera
conversion: 39 to 117mm)
F2.8~5.3
DSC-P51
2× zoom lens
f=6.3 to 12.6 mm (35 mm camera
conversion: 41to 82 mm), F3.8
DSC-P31
Single focal lens
f=5mm (35 mm camera conversion:
33 mm), F2.8
Camera
Effective pixels number of camera
DSC-P71
Approx. 3 210 000 pixels
DSC-P51
Approx. 1 980 000 pixels
DSC-P51
Approx. 1 980 000 pixels
Exposure control
Automatic,
Scene Selection (3 mode)
White balanceAutomatic, Daylight, Cloudy,
Fluorescent, Incandescent
File format DSC-P71
Still images: DCF conformity
(Exif Ver.2.1 JPEG conformity
GIF at Clip Motion)
DPOF correspondence
Movies: MPEG1 conformity
(without sound)
DSC-P51
Still images: DCF conformity
(Exif Ver.2.2 JPEG conformity
GIF at Clip Motion)
DPOF correspondence
Movies: MPEG1 conformity
(without sound)
DSC-P31
Still images: DCF conformity
(Exif Ver.2.1 JPEG conformity
GIF at Clip Motion)
DPOF correspondence
Movies: MPEG1 conformity
(without sound)
Recording media
“Memory Stick”
Flash Recommended distance
DSC-P71:0.5 to 3.8 m (1.6 to 12.5
ft) (W)
0.5 to 2.5 m (1.6 to 8.2 ft) (T)
01cov.book Page 101 Wednesday, May 22, 2002 3:40 PM
102
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
DSC-P51:0.4 to 2.8 m (1.3 to 9.2 ft)
(W/T)
DSC-P31:0.4 to 3.8 m (1.3 to 12.5
ft)
(when ISO sensitivity is set to Auto)
Output connectors
VIDEO OUT jack
Minijack
1 Vp-p, 75 ohm, unbalanced, sync
negative
USB jack mini-B
LCD screen
LCD panel used
DSC-P71
3.8 cm (1.5 type) TFT drive
DSC-P51
4.0 cm (1.6 type) TFT drive
DSC-P31
4.0 cm (1.6 type) TFT drive
Total number of dots
DSC-P71
123 200 (560×220) dots
DSC-P51
61 600 (280×220) dots
DSC-P31
61 600 (280×220) dots
Power, etc.
Power AA nickel hydride batteries (2)
2.4 V
AC-LS1 AC power adaptor
(not supplied), 4.2 V
Power consumption (when recording)
DSC-P71
2.1W
DSC-P51
1.7W
DSC-P31
1.7W
Operating temperature range
0° to +40°C (+32° to +104°F)
Storage temperature range
20° to +60°C (4° to +140°F)
Dimensions DSC-P71
124.9 × 58 × 43.6 mm (5 × 2 3/8 ×
1 3/4 inches)
DSC-P51
126.9 × 58 × 47 mm (5 × 2 3/8 ×
1 7/8 inches)
DSC-P31
106 × 58 × 39.5 mm (4 1/4 × 2 3/8 ×
1 9/16 inches)
(W/H/D, protruding portions not
included)
Mass DSC-P71
Approx. 284 g (10 oz) (camera, two
batteries, “Memory Stick” and wrist
strap included)
DSC-P51
Approx. 275 g (10 oz) (camera, two
batteries, “Memory Stick” and wrist
strap included)
DSC-P31
Approx. 231 g (8 oz) (camera, two
batteries, “Memory Stick” and wrist
strap included)
BC-CS1 Ni-MH battery charger
Power requirements
AC 100 to 240V 50/60Hz
2.2 W
Output voltageAA : DC 1.8 V 165 mA × 2
AAA : DC 1.8 V 70 mA × 2
Dimensions 70 × 29 × 74 mm (2 7/8 × 1 3/16 × 3
inches) (W/H/D)
Mass Approx. 70g (2 oz)
Operating temperature range
0° to +40°C (32° to +104°F)
AC-LS1 AC power adaptor (not
supplied)
Power requirements
AC 100 – 240 V, 50/60 Hz
Rated output voltage
DC 4.2 V, 1.5 A
External dimensions
105 × 36 × 56 mm (4 1/4 × 1 7/16 ×
2 1/4 inches) (W/H/D, protruding
parts not included)
Mass Approx. 180 g (6 oz)
(adaptor only)
Operating temperature range
0° to +40°C (32° to +104°F)
Storage temperature range
20° to +60°C (4° to +140°F)
Accessories
Video connector cable (1)
R6 (size AA) Ni-MH batteries (2)
Ni-MH Battery charger (1)
Power cord (mains lead) (1)
•USB cable (1)
Wrist strap
“Memory Stick” (8MB for DSC-P31, 16MB for
DSC-P71/P51) (1)
CD-ROM (USB driver: SPVD-008) (1)
Operating Instructions (1)
Design and specifications are subject to change
without notice.
01cov.book Page 102 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
103
Additional information
The LCD screen
For shooting still images
AImage size indicator (24, 25)
BRecording mode indicator (65)
CAE/AF LOCK indicator (26, 59)
DRemaining battery indicator
display (16)
EFlash mode (30)/Red-eye
reduction (31)/White balance
indicator (57)/AF illuminator
indicator (31, 97)
FDate/time indicator (32)
ISO sensitivity (92)
GSharpness indicator (93, 94, 95)
HPicture effect indicator (60)
ILow battery warning (16)
JAF range finder (58)
KSpot light-meter aiming point
(61)
LImage quality indicator (24, 25)
MScene selection mode indicator
NRemaining images indicator (25)
Self-diagnostics display (90)
ORemaining “Memory Stick”
capacity indicator (25)
PCenter AF indicator (58)/
Focus preset value (60)
QEV adjustment indicator (56)
RIris value indicator
SShutter speed indicator
TMacro (DSC-P71) (28)
USelf-timer display (29)
VVibration warning indicator (89)
WMenu/Guide menu (55)
When you press the MENU button, Menu/
Guide menu is toggled between display/don’t
display.
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
SOLARIZE
+
WB ISO
2048
3.0m
F5.6
1
2
3
4
5
6
7
8
9
q;
qa
qs
qd
qf
qg
qh
qj
qk
ql
w;
wa
ws
w
d
01cov.book Page 103 Wednesday, May 22, 2002 3:40 PM
104
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
For shooting movies
ARecording mode indicator (74)
BRemaining battery indicator
display (16)
CWhite balance indicator (57)
DPicture effect indicator (60)
ESpot light-metering aiming point
(61)
FAF range finder (58)
GImage size indicator (74)
HRecording time remaining
indicator (Maximum recording
time) indicator (18)/
Self-diagnostics display (90)
IRemaining “Memory Stick”
capacity indicator (25)
JCenter AF indicator (58)/
Focus preset value (60)
KEV adjustment indicator (56)
LMacro (DSC-P71) (28)
MSelf-timer indicator (29)
NMenu/Guide menu (55)
When you press the MENU button, Menu/
Guide menu is toggled between display/don’t
display
(SPOT METER) is not displayed on the
menu of the DSC-P51/P31 (page 61).
SOLARIZE
+
STBY
WB ISO
160
7
8
9
q;
qa
qs
qd
qf
2
3
4
5
6
The page numbers in parentheses indicate
the location of additional important
information.
01cov.book Page 104 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\14ADD.FM]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
105
Additional information
For still image playback
ARecording mode indicator (65)
BProtection indicator (69)/Print
mark indicator (72)
CZoom indicator (66)
DFile name (52)
ENumber of pages recorded in
“Memory Stick” (25)
FRemaining “Memory Stick”
capacity indicator (25)
GImage number (25)
HImage size indicator (24, 25)
IDate/time recorded indicator
(32)/Menu/Guide menu (55)
For movie playback
JImage size indicator (75)
KRecording mode indicator (74,
75)
LPlayback indicator (75)
MImage number/Number of
images recorded in the “Memory
Stick” (75)
NRemaining “Memory Stick”
capacity (75)
OCounter (75)
PPlayback screen (75)
QPlayback bar (75)
RMenu/Guide menu (55)
11
/
12
640
BACK/NEXT
x1.3
5
6
7
8
9
1
2
3
4
The page numbers in parentheses indicate
the location of additional important
information.
SLIDEPRINT
PROTECT
DELETE
0:12
320 8/8
OK
q
;
qa
qs
qd
qf
qg
qh
qj
q
k
01cov.book Page 105 Wednesday, May 22, 2002 3:40 PM
106
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\01covIX.fm]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
Index
A
Access lamp ..................................................... 23
AE/AF lock ................................................ 26, 59
AE/AF lock lamp ............................................... 9
AF illuminator ..................................... 12, 31, 97
AF lock ............................................................ 59
AF lock lamp (green) ................................ 11, 13
AF mode .......................................................... 26
Auto Power Off feature ................................... 20
B
Battery
Battery life .................................................. 18
Charging time ............................................. 15
Preparing batteries ...................................... 14
Remaining indicator ................................... 16
Beep/shutter sound .......................................... 98
C
CD-ROM ......................................................... 45
Charging
Charging the batteries ................................. 14
Charging time ............................................. 15
Computer
Copying images .................................... 48, 54
Copying movies to your computer ............. 80
USB cable ................................................... 47
USB driver .................................................. 45
Control button .................................................. 20
Copying images ......................................... 48, 54
D
DC plug ............................................................ 19
Deleting images ............................................... 39
DIVIDE ........................................................... 78
E
Editing still images
Print mark ................................................... 72
Protect ......................................................... 69
Resize .......................................................... 71
E-MAIL ........................................................... 65
EV adjustment ................................................. 56
Exposure
EV adjustment ............................................ 56
F
File
File names ................................................... 51
Image file storage destinations ................... 51
Finder ...............................................................32
Flash
FLASH LEVEL .................................... 93, 94
RED EYE REDUCTION ........................... 31
Selecting a flash mode ................................ 30
Focus
AE/AF lock lamp .......................................... 9
AF lock ....................................................... 59
Focus preset ................................................ 60
Shooting (using auto adjustment mode) ..... 26
FORMAT ......................................................... 43
G
GIF ................................................................... 52
I
Image
Copying images .......................................... 48
File names ................................................... 51
Image file storage destinations .................... 51
Image quality .............................................. 24
Image size ....................................... 24, 25, 91
Index ................................................................36
Installation
USB driver ..................................................45
ISO ...................................................................92
J
JPG ................................................................... 52
L
LCD screen display
DISPLAY/LCD ON/OFF ............................ 32
LCD brightness ...........................................98
M
Memory Stick
Formatting a “Memory Stick” .................... 43
Inserting a “Memory Stick” ........................23
Number of shooting images ........................ 25
The number of images that can be saved/
shooting time ..........................................91
Menu
Changing menu ...........................................55
Mode dial .........................................9, 11, 13, 55
Movie
Continuous shooting ................................... 18
Copying movies to your computer ..............80
01cov.book Page 106 Wednesday, May 22, 2002 3:40 PM
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\01covIX.fm]
masterpage:Right
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
107
Cutting movies .............................................78
Deleting movies ...........................................76
Shooting movies ..........................................74
Viewing movies ...........................................75
MPG .................................................................52
N
NR slow shutter ................................................35
NTSC ................................................................98
O
On moisture condensation ................................99
P
PAL ...................................................................98
Picture effect .....................................................60
Power
An external power source ............................19
batteries .......................................................14
Inserting the batteries ..................................17
ON/OFF .......................................................20
Precautions .......................................................99
R
RED EYE REDUCTION ...........................31, 97
RESET button ...................................9, 11, 13, 90
S
SCENE SELECTION ......................................34
SCN ..................................................................34
Self-timer ..........................................................29
Set up
SET UP ........................................................55
Setting
Changing menu ........................................... 55
Date and time .............................................. 21
Image quality .............................................. 24
Image size ....................................... 24, 25, 91
SET UP ....................................................... 55
Setting the date and time ................................. 21
SHARPNESS .................................................. 93
Shooting close-ups (Macro) ............................ 28
Shooting mode
Clip Motion ................................................. 62
E-MAIL ...................................................... 65
MPEG MOVIE ........................................... 74
Shooting (using auto adjustment mode) ..... 26
Shooting in Multi Burst mode .................... 64
Shooting with the date and time inserted ........ 32
Still image playback
Index (9 images) screen .............................. 37
Quick Review ............................................. 27
ROTATE ...................................................... 68
Slide show ................................................... 67
Using the zoom feature ............................... 28
Viewing images on a TV screen ................. 38
Viewing single images ................................ 36
Viewing the images on your computer . 53, 54
Still image shooting
AE/AF lock lamp .......................................... 9
AF mode ..................................................... 26
EV adjustment ............................................ 56
Image quality .............................................. 24
Image size ................................................... 24
Number of shooting images ........................ 25
Picture effect ............................................... 60
SCENE SELECTION ................................. 34
Selecting a flash mode ................................ 30
Shooting close-ups (Macro) ........................ 28
Shooting with the date and time inserted .... 32
Spot light-metering ..................................... 61
The number of images that can be saved .... 91
The number of images that can be shot ...... 18
Using auto adjustment mode ...................... 26
Using the self-timer .................................... 29
WHITE BALANCE .................................... 57
Zoom ........................................................... 28
T
Trimming ......................................................... 67
TV set .............................................................. 38
U
USB ........................................................... 45, 47
Using your camera abroad ............................... 19
V
Video connecting cable ....................................38
Viewing single images ..................................... 36
W
Warnings and messages ................................... 89
Z
Zoom
Digital zoom ............................................... 28
Playback zoom ............................................ 66
Using the zoom feature ............................... 28
01cov.book Page 107 Wednesday, May 22, 2002 3:40 PM
307435115
Sony Corporation Printed in Japan
Printed on recycled paper using
VOC (Volatile Organic
Compound)-free vegetable oil
based ink.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony Cybershot DSC-P31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony Cybershot DSC-P31 in the language / languages: English as an attachment in your email.

The manual is 4.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony Cybershot DSC-P31

Sony Cybershot DSC-P31 User Manual - German, Dutch, Italian - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info