158606
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
Step 3: Presetting radio stations
(continued)
Saving the power
in standby mode
You can lower the power consumption to a
minimum (Power Saving Mode) and save
energy in the standby mode.
/ Press DISPLAY on the remote or on
the CMT-SD1 when the power is off.
The unit switches to the Power Saving
Mode and the clock display disappears.
The system turns on/off by pressing
1/u.
Tips
u indicator and timer indicator (when the timer is
set) light up even in the Power Saving Mode.
The timer work in the Power Saving Mode.
To cancel the Power Saving Mode
Press DISPLAY.
The clock display appears.
DISPLAY
5 Press MENU/NO then +/–
repeatedly until “Frq-Memory?”
appears then press ENTER/YES.
The preset number flashes. Proceed to
step 6 while the preset number is
flashing. If the unit is not operated for
more than 16 seconds, the preset number
disappears and the unit returns to the
status of step 3. If this happens, start
over from step 4.
6 Press ? or / on the remote to
select the preset number you want
then press ENTER/YES.
The station is stored.
Select 1 to 20 for FM, and select 1 to 10
for AM.
7 Repeat steps 2 through 6 to preset
other stations.
To tune in the station manually
1 Press TUNING MODE repeatedly until
“MANUAL” appears in step 3.
2 Press +/– repeatedly to tune in the station
and continue from step 5.
To change the preset number
Start again from step 1.
To change the AM tuning interval
(except for European model)
The AM tuning interval is factory-set to
9 kHz (10 kHz in some areas). To change the
AM tuning interval, tune in any AM station
first, then turn off the power. While holding
down the TUNING + button, turn the power
back on. When you change the interval, all
the AM preset stations are erased. To reset
the interval, repeat the same procedure.
Tips
• When a new station is memorized, the station
formerly memorized at that preset number is
erased.
The preset staions are retained for a week even if
you disconnect the mains lead or if a power failure
occurs.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt sd 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt sd 3 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony cmt sd 3

Sony cmt sd 3 User Manual - German, Dutch, Swedish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info