706993
237
Zoom out
Zoom in
Previous page
1/251
Next page
29
PL
Informacje dodatkowe
CMT-SBT20B
4-582-332-22(1)
Ustawianie programatora
odtwarzania
Można włączyć odtwarzanie pyty CD,
urządzenia USB lub radio o określonej
godzinie.
Uwaga
Przed ustawianiem programatora upewnij się, że
zegar jest ustawiony (strona10).
1
Przygotuj źródło dźwięku i
naciśnij VOLUME +/–
, aby
ustawić poziom głośności.
2
Naciśnij TIMER MENU
, aby
wejść do trybu ustawiania zegara.
3
Naciśnij
/
, aby wybrać
„PLAY SET”, a następnie naciśnij
.
Na wyświetlaczu pojawi się napis
„ON TIME” i zacznie migać wskazanie
godziny.
4
Naciśnij
/
, aby ustawić
godzinę, po czym naciśnij
.
Na wyświetlaczu zacznie migać
wskazanie minut.
5
Naciśnij
/
, aby ustawić
minuty, po czym naciśnij
.
Na wyświetlaczu pojawi się napis
„OFF TIME” i zacznie migać wskazanie
godziny.
W ten sam sposób ustaw godzinę i
minuty zatrzymania programatora
odtwarzania.
6
Naciśnij
/
, aby wybrać
źródło dźwięku, a następnie
naciśnij
.
Zostanie wyświetlone żądanie
potwierdzenia programatora
odtwarzania.
7
Naciśnij /
, aby wyłączyć
urządzenie.
Wskazówka
Jeżeli źródłem dźwięku jest radio, należy dostroić
stację radiową przed wyłączeniem urządzenia
(strona15).
Aby zmienić ustawienia programatora, wykonaj
ponownie procedurę od początku.
Nastawienie Programatora Odtwarzania
pozostaje tak długo, dopóki nie zostanie ręcznie
anulowane.
Uwaga
Urządzenie włączy się dokładnie o godzinie
ustawionej w programatorze odtwarzania. Jeżeli
źródłem dźwięku jest płyta CD, MP3/WMA lub
urządzenie USB, rozpoczęcie odtwarzania może
zająć pewien czas.
Programator odtwarzania nie działa, jeżeli
urządzenie jest już włączone o ustawionej
godzinie.
Jeżeli źródłem dźwięku w funkcji programatora
odtwarzania jest stacja radiowa, w
programatorze zostanie użyta ostatnio
dostrojona częstotliwość. Jeżeli po nastawieniu
programatora częstotliwość zostanie zmieniona,
zmieni się też ustawienie radia w funkcji
programatora.
Aby sprawdzić ustawienie
1
Naciśnij TIMER MENU
.
2
Naciśnij
/
, aby wybrać „SELECT”, a
następnie naciśnij
.
3
Naciśnij
/
, aby wybrać „PLAY SEL, a
następnie naciśnij
.
Ustawienia programatora pojawią się na
wyświetlaczu
.
Aby skasować programator
1
Naciśnij TIMER MENU
.
2
Naciśnij
/
, aby wybrać „SELECT”, a
następnie naciśnij
.
3
Naciśnij
/
, aby wybrać „OFF”, a
następnie naciśnij
.
237


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CMT-SBT20B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CMT-SBT20B in the language / languages: German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info