158608

Sony cmt md 1 dx piccol piano Manual

36
Zoom out
Zoom in
Previous page
1/120
Next page
36
Making a space
between tracks 3
seconds long
–– Smart Space, Auto Cut
To cancel automatic track marking
1 Press EDIT on the remote during recording
pause.
2 Press +/– on the remote repeatedly until
“LevelSync ?” appears.
3 Press ENTER/YES on the remote.
“LevelSyncOFF?” appears.
4 Press ENTER/YES on the remote again.
“LEVEL-SYNC” disappears.
When “LEVEL-SYNC” disappears, a track
number is marked only at the beginning of
each recording.
Notes
• You may not mark track numbers automatically if
the sound source to be recorded is noisy (e.g.,
tapes or radio programs).
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press 1/u to turn off the system.
Marking track numbers
at a specific point while
recording
–– Track Mark
You can mark track numbers at any time
while recording, regardless of the type of
sound source.
The Smart Space and Auto Cut functions let
you make a blank space between tracks three
seconds long automatically while making a
digital recording.
Smart Space
If there is extended silence of 4 to 29 seconds
while digital recording, the system replaces
the silence with a blank of about 3 seconds
and continues recording.
Auto Cut
If there is no sound input for 30 seconds
while digital recording, the system replaces
the silence of 30 seconds with a blank of
about 3 seconds and enters recording pause.
Notes
• The Smart Space and Auto Cut functions are
factory set to ON.
• If you turn the power off or disconnect the power
cord, the system will recall the last setting (ON or
OFF) of the Smart Space and Auto Cut functions
the next time you turn the power on.
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press 1/u to turn off the system.
Marking track numbers
(continued)
Press REC while recording at the point
you want to add a track mark.
The tracks following the added one are
numbered.
(P
1/u
= 0
–
p
) +
+
(P p
+
–
6
REC
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt md 1 dx piccol piano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt md 1 dx piccol piano in the language / languages: English, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info