158608
33
Zoom out
Zoom in
Previous page
1/120
Next page
33
The MD Deck - Recording
Starting recording
with 6 seconds of
prestored audio
data
— Time Machine Recording
When you press
ENTER/YES in step 5
Recorded
portion
Time
Beginning of the
source to be recorded
End of the source
to be recorded
Audio data in 6-second
buffer memory
3 Press REC.
The MD is now ready for recording.
4 Press MD ^.
Recording starts.
5 Start playing the source you want to
record.
When recording from this system’s CD,
the track numbers are automatically
marked. Press REC while recording to
mark the track numbers (see “Marking
track numbers” on page 35).
To stop recording
Press MD p.
If “Level Over” appears in the
level meter
A high-level signal was input during
recording in the tape function. When the
sound is distorted, reduce the recording level
(see page 56), then re-record.
While “TOC” is lit or is flashing
To ensure complete recording, do not move
the system or disconnect the power cord. The
system updates the Table of Contents (TOC)
while “TOC” is flashing.
Tip
You can see the recording time and the remaining
time in the display while recording by pressing
DISPLAY on the remote.
Notes
The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press 1/u to turn off the system.
If you pause recording during CD recording, a
track number is recorded at that point. Also, note
that the tracks are recorded as the same single
track with a single track number when a single
track of the same CD is recorded repeatedly.
Please do not use MDs with labels that are
protruding or labels that have not been positioned
correctly. Use of such MDs may damage this
system.
When recording from an FM or satellite
broadcast, the first few seconds of material
are often lost due to the time it takes you to
ascertain the contents and press the record
button. To prevent the loss of this material,
the Time Machine Recording feature
constantly stores 6 seconds of the most recent
audio data in a buffer memory. When you
start recording the sound source, the
recording actually starts with the 6 seconds of
audio data stored in the buffer memory in
advance, as shown in the illustration below:
continued
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt md 1 dx piccol piano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt md 1 dx piccol piano in the language / languages: English, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info