158608
30
Zoom out
Zoom in
Previous page
1/120
Next page
30
MDs (Mini Disc) let you digitally record and
play music with high quality sound
comparable with the sound of CDs. Another
feature of MDs is track marking. The track
marking feature lets you quickly locate a
specific point or easily edit the recorded
tracks. However, depending on the source
you record, the recording method varies.
Also, the way the track numbers are recorded
differs depending on the source.
When the source you record from is:
This system’s CD player
The digital signal from the CD is recorded
as it is (digital recording).*
Track numbers are automatically marked
as on the original CD.
This system’s tuner and other analog
components
The analog signal is converted to a digital
signal and recorded (analog recording).**
–A track number is marked at the beginning
of a recording, but when you turn on the
Level Sync function (see page 35), track
numbers are automatically marked in sync
with the level of the input signal.
* For details on the limitations for digital
recording, see page 54.
** This signal is converted because these systems do
not use digital signals.
Note on MD track numbers
On an MD, the track number (track sequence), track
start and end point information, etc., are recorded in
the TOC* area independent of the sound
information. You can edit recorded tracks quickly
by modifying the TOC information.
* TOC: Table Of Contents
Before you start
recording
The MD Deck – Recording
After recording
/ Press MD 6 to remove the MD or
press 1/u to turn off the system
power.
“TOC” starts lighting or flashing. The
MD recording is complete only after the
recording information is entered to MD.
Note
The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
Remove the MD.
Press 1/u to turn off the system.
Protecting a recorded MD
To protect a recorded MD, slide the tab on the side
of the MD to open the slot.
In this position, the MD cannot be recorded on.
To record on the MD, slide the tab to close the slot.
Slide the tab
Tab
If the MD is record protected, “MD Protected”
appears in the display and the MD cannot be
recorded on. Slide the tab to closed position
reinsert the MD and try again.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt md 1 dx piccol piano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt md 1 dx piccol piano in the language / languages: English, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info