158790
27
Zoom out
Zoom in
Previous page
1/64
Next page
27
MD Recording
Note
You cannot mark track numbers automatically if the
sound source to be recorded is noisy (e.g., tapes or
radio programmes).
1 Press FUNCTION repeatedly to switch the
function to MD.
2 Press MENU/NO on the remote.
3 Press l or L (or . or > on the
remote) repeatedly until “Setup?” appears,
then press ENTER/YES on the remote.
4 Press l or L (or . or > on the
remote) repeatedly until “T.Mark Off” or
“T.Mark LSync” appears, then press
ENTER/YES on the remote.
5 Press l or L (or . or > on the
remote) repeatedly to select the setting,
then press ENTER/YES on the remote.
To Select
Notes
The recorded “LP:” is a stamp which appears to
indicate that the track cannot be played back when
you try to play the track on system that does not
support MDLP mode. It does not appear for systems
that support MDLP mode.
When set to “On”, “LP:” is recorded as the track
title, so the number of characters that can be input
to an MD is reduced. In addition, if you divide an
“LP:” track using the Divide Function, “LP:” is also
added to the latter track.
Marking track numbers
Automatically during recording
Track numbers are automatically marked as on
the original source during recording from this
system’s CD player or components connected
to DIGITAL OPTICAL IN jack. Use the Level
Synchro Recording Function to automatically
mark track numbers during recording from this
system’s tuner or components connected to the
ANALOG IN jacks.
At any point during recording
You can mark track numbers during recording
of any source.
After recording
Use the Divide Function (see “Dividing
recorded tracks” on page 38).
Marking track numbers
automatically during recording
Level-Synchro Recording
The Level Synchro Recording Function is
factory set to on, so the track numbers are
automatically marked. If “L-SYNC” does not
appear during recording, turn on the Level
Synchro Recording as follows. Track numbers
are automatically marked when the input signal
is continuously below a certain level for more
than two seconds and then exceeds that level.
Turn on the Level
Synchro Recording
Function
T.Mark LSync
(factory setting)
Turn off the Level
Synchro Recording
Function
T.Mark Off
When you set the Level Synchro Recording
Function, “L-SYNC” lights up.
6 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
continued
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt m100md s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt m100md s in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony cmt m100md s

Sony cmt m100md s User Manual - German, Dutch, Italian - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info