158725
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
To tune in a station with a weak
signal
Press TUNING (TUNING/CLOCK/TIMER on
the remote) + or repeatedly in step 2 to tune
in the station manually.
To set another station to an existing
preset number
Start over from step 1. After step 3, press
PRESET + or repeatedly to select the preset
number where you want to store the other
station and the press ENTER/PGM (TUNER
MEM/ENTER/PGM on the remote).
You can preset a new station in the selected
preset number.
To change the AM tuning interval
(except for the European and Middle
Eastern models)
Disconnect the power cord from the wall outlet
first, and then set the AM FREQ STEP switch
at the rear to 9 kHz or 10 kHz.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuners memory
first.
Press PRESET + or repeatedly to tune in
the desired preset station.
The preset number appears in the display for a
few seconds.
To Do this
Turn off the radio Press ?/1.
To listen to non-preset radio stations
Use manual or automatic tuning. For manual
tuning, press TUNER (TUNER/BAND on the
remote) repeatedly to select FM or AM and
then press TUNING (TUNING/CLOCK/
TIMER on the remote) + or repeatedly.
For automatic tuning, press and hold TUNING
(TUNING/CLOCK/TIMER on the remote) +
or .
Tuner
Presetting radio stations
You can preset up to 24 stations for FM and
AM.
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select FM or AM.
2 Press and hold TUNING (TUNING/
CLOCK/TIMER on the remote) + or
until the frequency indication starts to
change, then release it.
Scanning stops automatically when the
system tunes in a station. STEREO (for a
stereo program) appears.
If it doesnt stop automatically, press
TUNING (TUNING/CLOCK/TIMER on
the remote) + or repeatedly to tune in a
station manually.
3 Press TUNER MEM (TUNER MEM/
ENTER/PGM on the remote).
A preset number appears in the display.
The stations are stored from preset number
1.
4 Press PRESET + or until the preset
number you want for the station
flashes.
5 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
The station is stored.
6 Repeat steps 2 to 5 to store other
stations.
Preset number
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt ep 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt ep 30 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony cmt ep 30

Sony cmt ep 30 User Manual - German, Dutch, Italian, Polish, Swedish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info