158983
12
Zoom out
Zoom in
Previous page
1/36
Next page
12
GB
To change the AM tuning interval
(except for European models)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding
TUNING +, press ?/1 on the unit. When you
change the interval, all the AM preset stations
are erased. To reset the interval, repeat the same
procedure.
Note
You cannot change the AM tuning interval in Power
Saving Mode.
Tips
The preset stations are retained for about half a day
even if you disconnect the mains lead or if a power
failure occurs.
To improve the reception, adjust the supplied
antennas or connect an external antenna.
To improve tuner reception
When tuner reception is poor, set CD player
power off by the CD power manage function.
CD power is factory set to on.
1 Press FUNCTION repeatedly to switch the
function to CD.
2 Press ?/1 to turn off the system.
3 Press ?/1 on the unit while holding CD x on
the unit.
“CD POWER” and “OFF” appear.
To set the CD power on
Repeat the procedure above, and “CD POWER
and “ON” appear.
Notes
When “CD POWER” and “OFF” are selected, CD
access time is increased.
In Power Saving Mode, switching the CD power on
or off using the CD power manage function is not
possible.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 11).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“PRESET” appears in the display.
3 Press +/– (or turn TUNING +/– on the
unit) repeatedly to select the desired
preset station.
Listening to non-preset radio
station
Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“AUTO” and “PRESET” disappear from
the display.
3 Press +/– (or turn TUNING +/– on the
unit) repeatedly to tune in the desired
station.
Tips
To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
Press TUNING MODE repeatedly until “AUTO”
appears in step 2 above, then press +/– (or turn
TUNING +/– on the unit). The frequency indication
changes and scanning stops when the system tunes in
a station (Automatic Tuning).
To record the radio programs, use manual recording
(pages 16 and 18).
Listening to the radio
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony cmt cpx 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony cmt cpx 11 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony cmt cpx 11

Sony cmt cpx 11 User Manual - German, Dutch, Italian - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info