Manual Sony CDP-XE900E (page 12 of 46) (English, French, Spanish)

50647

Zoom out

Zoom in

1/46

Recording From CDs

When tracks, which aren’t numerically consecutive on

the disc, are programmed consecutively (i.e. 1, 3, 5

etc.)

A one-second access time blank is added between the

tracks.

You can automatically insert a blank space of 3

seconds between each track

Use the Auto Space function (see page 14).

Recording a CD by Specifying

Tape Length (Time Edit/Just

Edit)

You can have the player create a programme that will

fit the length of the tape. Select one of the following

options:

• Time Edit: automatically creates a programme,

keeping the original order of the disc.

• Just Edit: automatically arranges the track order to fit

the tape length.

The programme can contain up to 24 tracks (a pause

inserted between tracks is counted as one track).

Note that tracks whose numbers are over 24 cannot be

programmed automatically.

3 Press EDIT/TIME FADE to have the player create

the programme.

The display shows the tracks to be recorded. “B” in

the

indication flashes in the display.

4 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

programme for side B. The display shows the

programmed tracks.

When you record on one side of the tape or on a

DAT or MD, skip this step.

5 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the programme for side

6 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

To cancel Time Edit/Just Edit

Press PLAY MODE repeatedly until “SHUFFLE” and

“PROGRAM” disappear from the display. When using the

remote, press CONTINUE.

You can programme the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a programme from the remaining tracks.

In this case, you cannot select “HALF” to specify the tape

length.

You can freely specify the tape length

Set the tape length using AMS ±.

Example: When the tape length of one side is 30 minutes

and 15 seconds

1To set the minutes, turn AMS ± until

“30” appears in the display, then press

ENTER.

2To set the seconds, turn AMS ± until

“15” appears in the display, then press

ENTER.

When tracks, which aren’t numerically consecutive on

the disc, are programmed consecutively (i.e. 1, 3, 5

etc.)

A one-second access time blank is added between the

tracks.

You can automatically insert a blank space of 3

seconds between each track

Use the Auto Space function (see page 14).

EDIT/TIME FADE

0 / )·

1 Press EDIT/TIME FADE before you start playing

as follows:

• To select Time Edit, press the button until

“EDIT” appears and “A” in the

indication

flashes in the display.

• To select Just Edit, press the button until “JUST

EDIT” appears and “A” in the

indication

flashes in the display.

2 Press 0 or ) to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n HALF ˜ C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

When you select “HALF”

The player sets the programme of each side to a half of

the total playing time of the disc. Note that you cannot

select “HALF” when the disc has more than 24 tracks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony CDP-XE900E in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony CDP-XE900E Manual

Product: