50627
15
Zoom out
Zoom in
Previous page
1/56
Next page
Recording From CDs
15
EN
Recording From CDs
1
Press EDIT/TIME FADE before you start playing
until EDIT appears and TAPE A flashes in the
display.
2 Press 0 or ) to specify the tape length.
Each time you press these buttons, the display
changes as shown below with the tape length of
one side .
When you select HALF
The player divides the total playing time of the disc in
half, keeping the original order.
Note that you cannot select HALF when the disc has
more than 24 tracks.
3 Press EDIT/TIME FADE to have the player create
the programme.
The display shows the tracks to be recorded.
TAPE B flashes in the display.
4 When you record on both sides of the tape, press
EDIT/TIME FADE again.
The player inserts a pause, then creates the
programme for side B. The display shows the
programmed tracks.
When you record on one side of the tape or on a
DAT or MD, skip this step.
5 Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
6 When you record on side B, reverse the tape and
press · or P on the player to resume playing.
To cancel Time Edit
Press PLAY MODE.
When using the remote, press CONTINUE.
You can specify the tape length freely
You can set the tape length using AMS ±.
Example: When the tape length of one side is 30 minutes
and 15 seconds
1 To set the minutes, turn AMS ± until
30 appears in the display, then push
AMS ±.
2 To set the seconds, turn AMS ± until
15 appears in the display, then push
AMS ±.
n HALF ˜ C-46 23.00 ˜ C-54 27.00 ˜ C-60 30.00 N
n - -. - - ˜ C-90 45.00 ˜ C-74 37.00 N
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
Fading in or out at the point you want
(CDP-XE520 and CDP-XE320 only)
FADER
CDP-XE520
Number buttons
When tracks, which arent numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
To check and change your programme
See page 13.
(Continued)
FADER
CDP-XE320
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CDP-XE520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CDP-XE520 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CDP-XE520

Sony CDP-XE520 User Manual - German, Dutch, Italian - 76 pages

Sony CDP-XE520 User Manual - Polish - 56 pages

Sony CDP-XE520 User Manual - Portuguese - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info