Manual Sony CDP-XE300 (page 12 of 46) (English, French, Spanish)

50602

Zoom out

Zoom in

1/46

Recording From CDs

To check and change your program

See page 11.

The indication appears while checking the program

for side A and while checking the program for side

When tracks, which aren’t numerically consecutive on

the disc, are programmed consecutively (i.e. 1, 3, 5

etc.)

A one-second access time blank is added between the

tracks.

Recording a CD by Specifying

Tape Length (Time Edit)

(CDP-XE500 only)

You can have the player create a program that will fit

the length of the tape.

The player automatically creates a program, keeping

the original order of the disc.

The program can contain up to 24 tracks (a pause

inserted between tracks is counted as one track).

Note that tracks whose numbers are over 24 cannot be

programmed automatically.

EDIT/TIME FADE

0 / )

4 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

program for side B. The display shows the

programmed tracks.

When you record on one side of the tape or on a

DAT or MD, skip this step.

5 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

6 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

To cancel Time Edit

Press PLAYMODE until “SHUFFLE” and “PROGRAM”

disappear from the display.

When using the remote, press CONTINUE.

You can program the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a program from the remaining tracks. In

this case, you cannot select “HALF” to specify the tape

length.

You can freely specify the tape length

Set the tape length using ≠ AMS ±.

Example: When the tape length of one side is 30 minutes

and 15 seconds

1 To set the minutes, turn ≠ AMS ± until

“30” appears in the display, then press

ENTER .

2 To set the seconds, turn ≠ AMS ± until

“15” appears in the display, then press

ENTER .

When tracks, which aren’t numerically consecutive on

the disc, are programmed consecutively (i.e. 1, 3, 5

etc.)

A one-second access time blank is added between the

tracks.

To check and change your program

See page 11.

1 Press EDIT/TIME FADE before you start playing

until EDIT appears and “A” in the indication

flashes in the display.

2 Press 0 or ) to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n HALF ˜ C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - - .- - N

(23.00) (27.00) (30.00) (37.00) (45.00)

When you select “HALF”

The player sets the program of each side to a half of the

total playing time of the disc. Note that you cannot select

“HALF” when the disc has more than 24 tracks.

3 Press EDIT/TIME FADE to have the player create

the program.

The display shows the tracks to be recorded. “B” in

the indication flashes in the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony CDP-XE300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CDP-XE300

Sony CDP-XE300 User Manual - German, Dutch, Italian - 61 pages

Sony CDP-XE300 User Manual - Polish - 46 pages

Sony CDP-XE300 User Manual - Portuguese - 61 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony CDP-XE300 Manual

Product: