50561
15
Zoom out
Zoom in
Previous page
1/64
Next page
Recording From CDs
15
GB
Recording From CDs
Recording From CDs
Recording Your Own
Programme
You can record the programme youve created on a
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
AMS ±
·
P
PLAY MODE
1 Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in Creating a programme on
the player on page 13 or Steps 1 and 2 in
Creating a programme using the remote on page
14.
TAPE A appears in the display.
2 When you record on both sides of the tape, press
P to insert a pause.
P and TAPE B appear in the display and the
playing time is reset to 0.00.
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3 Repeat Step 1 to create the programme for side B.
4 Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the player
pauses at the end of the programme for side A.
5 When you record on side B, reverse the tape and
press · or P on the player to resume playing.
To check and change your programme
See page 15.
TAPE A appears while checking the programme for
side A and TAPE B appears while checking the
programme for side B.
Recording From CDs
Checking the track order
You can check your programme before or after you
start playing.
Press CHECK.
Each time you press this button, the display shows the
track number in the programmed order. After the last
track in the programme, the display shows “– END –”
and returns to the original display. If you check the
order after you start playing, the display shows only
the remaining track numbers.
Changing the track order
You can change your programme before you start
playing.
To
Erase a track
Erase the last track in the
programme
Add tracks to the end of the
programme
Erase the whole programme
completely
You need to
Press CHECK until the track
you dont want appears in
the display, then press
CLEAR
Press CLEAR. Each time you
press the button, the last
track will be cleared.
Turn AMS ± until
the track number you want
to add appears, then push
AMS ±.
When using the remote,
press the number buttons of
the tracks to be added.
Hold down CLEAR until
CLEAR appears in the
display. Create a new
programme following the
programming procedure.
Playing CDs
(Continued)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CDP-XB630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CDP-XB630 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CDP-XB630

Sony CDP-XB630 User Manual - German, Dutch, Italian, Portuguese, Swedish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info