50538
17
Zoom out
Zoom in
Previous page
1/84
Next page
17
GB
Other Functions
i.LINK connections
The use of i.LINK cables to connect i.LINK components
as shown below is called a “daisy chain” configuration.
Data can be transmitted between any two
components even if they are indirectly connected.
Branch connections
Any i.LINK component with three or more i.LINK
connectors can serve as a branch point.
Up to 63 i.LINK components can be connected in a
single configuration. However, the maximum
number of components that can be daisy-chained in
a single route is 17 (i.e., a maximum of 16 i.LINK
connecting cables in a row). Each i.LINK cable used
in a single route is called a “hop.” For example,
there are 6 hops in the route between A and C in the
illustration below, and 3 hops in the route between A
and D.
BA
DC
Each route between A and B; A and C; A and D; B and
C; B and D; and C and D in the illustration above can
have 16 hops (i.e., 17 components).
Loop-connetion
A signal output from one component is transmitted to
all other components. A loop connection should thus
be avoided to prevent the return of a signal to its
source.
Notes
Some i.LINK components (such as personal computers) do
not transfer signals when they are turned off. Refer to the
operation manual of each component to be connected
before you hook them up.
The maximum transmission rate of an i.LINK component is
printed near its i.LINK connector. The indications S100,
S200, and S400 refer to maximum transmission rates of 100,
200, or 400 Mbps*, respectively. The actual transmission
rate may be faster or slower, depending on the differences
in transmission rates and specifications among the
connected components.
z What is Mbps?
“Mbps” is an abbreviation for megabits per second. It
indicates the amount of data transmitted per second. For
example, a rate of 200 Mbps means 200 megabits of data
are transmitted in one second.
(Continued)
i.LINK connecting cable
i.LINK component
Correct Incorrect (looped)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CDP-LSA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CDP-LSA1 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CDP-LSA1

Sony CDP-LSA1 User Manual - Dutch, Italian, Portuguese, Swedish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info