578054
75
Zoom out
Zoom in
Previous page
1/88
Next page
75
Additional information
Trouble check
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu system.
m Set it to ON. (p. 30)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The batteries are not inserted with the correct polarity.
m Insert the batteries with the correct polarity. (p. 84)
• The batteries are dead.
m Insert new ones. (p. 84)
• DISPLAY is set to V-OUT/LCD in the menu system.
m Set it to LCD. (p. 30)
• Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least
1 hour. (p. 67)
• Some troubles occur in your camcorder.
m Remove the cassette and insert it again, then operate the
camcorder.
• NIGHTSHOT is set to ON.
m Set it to OFF. (p. 36)
The supplied Remote Commander
does not work.
Others
Symptom Cause and/or Corrective Actions
• The contrast between the subject and background is too
high. The camcorder is not malfunctioning.
m Change locations.
• The camcorder is not malfunctioning.
• EDIT is set to ON in the menu system.
m Set it to OFF. (p. 32)
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH/V8-25CLD
cleaning cassette (not supplied). (p. 68)
• The LCD panel is open.
m Close the LCD panel. (p. 16)
• If 10 minutes elapse after you set the POWER switch to
CAMERA without inserting a cassette, the camcorder
automatically starts the demonstration or DEMO is set ON
in the menu system.
m Insert the cassette and the demonstration stops.
You can deactivate the demonstration. (p. 31)
• Incorporated fluorescent tube is worn out.
m Please contact your nearest Sony dealer.
• The self-diagnosis function is activated.
m Check the code and solve the problem. (p. 76)
The five digit code appears.
A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
background.
The picture does not appear on the
LCD screen.
An unknown picture is displayed in
the viewfinder or on the LCD screen.
The picture does not appear in the
viewfinder.
The picture is “noisy”.
The playback picture is not clear.
A vertical band appears when
shooting a very bright subject.
Picture is recorded in incorrect/
unnatural color.
The beep sounds for 5 seconds.
The picture from a TV or VCR does
not appear even when the camcorder
is connected to outputs on the TV or
VCR.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TRV93 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TRV93 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info