50013
73
Zoom out
Zoom in
Previous page
1/116
Next page
73
Advanced operations / Усовершенствованные операции
Editing onto another
tape
You can create your own video programme by
editing with any other h 8 mm, H Hi8, j
VHS, k S-VHS, VHSC, K S-VHSC
or l Betamax VCR that has video/audio inputs.
Before editing
Connect the camcorder to the VCR using the
supplied A/V connecting cable.
Set the input selector on the VCR to LINE, if
available.
Set EDIT to ON in the menu system (p. 34).
Starting editing
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, and insert your
recorded tape into the camcorder.
(2)Play back the recorded tape on the camcorder
until you locate the point just before where
you want to start editing, then press P to set
the camcorder in playback pause mode.
(3)On the VCR, locate the recording start point
and set the VCR in recording pause mode.
(4)First press P on the camcorder, and after few
seconds press P of the VCR to start editing.
To edit more scenes
Repeat steps 2 to 4.
To superimpose the title while you
are editing
You can superimpose the title while you are
editing. Refer to “Superimpose a title” (p. 55).
To stop editing
Press p on both the camcorder and the VCR.
Note on the DISPLAY function
If you have displayed the viewfinder screen
indicators on the TV, erase the indicators by
pressing DISPLAY on the Remote Commander
so that they will not be superimposed on the
edited tape.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine
Synchro Edit feature to the LANC l jack of the
camcorder, using a LANC cable (not supplied),
the edit will be even more precise.
Монтаж на другую
ленту
Вы можете создать Вашу собственную видео-
программу путем монтажа с помощью другого
КВМ типа h 8 мм, H Hi8,j VHS, k S-
VHS, VHSC, K S-VHSC или l
Betamax, который имеет входы аудио/видео.
Перед монтажем
Подсоедините видеокамеру к КВМ, используя
прилагаемый соединительный кабель аудио/
видео.
Установите селектор входных сигналов на КВМ
в положение LINE, если такое имеется.
Установите EDIТ на ON в системе меню (стр. 34).
Начните монтаж
(1)Вставьте чистую ленту (или ленту, которую
Вы хотите перезаписать) в КВМ и вставьте
Вашу записанную ленту в видеокамеру.
(2)Воспроизводите записанную ленту в
видеокамере до тех пор, пока Вы не
обнаружите место немного раньше точки,
откуда Вы хотите начать монтаж, а затем
нажмите P для установки видеокамеры
на режим паузы воспроизведения.
(3)Найдите на КВМ точку начала записи и
установите КВМ на режим паузы записи.
(4)Сперва нажмите P на видеокамере, а
затем через несколько секунд нажмите P
на КВМ для начала монтажа.
Для монтажа других сцен
Повторите пункты со 2 по 4.
Для наложения надписи во время
монтажа
Вы можете наложить надпись во время
монтажа. См. раздел “Наложение надписи”
(стр. 55).
Для остановки монтажа
Нажмите p и на видеокамере и на КВМ.
Примечание к функции DISPLAY
Если Вы отобразили индикаторы
видоискателя на экране телевизора, сотрите
индикаторы путем нажатия DISPLAY на
пульте дистанционного управления, так,
чтобы они не накладывались на ленту при
выполнении монтажа.
Примечание к точному синхронному монтажу
Если Вы подсоедините видеодеку, которая
имеет функцию точного синхронного монтажа
к гнезду LANC l на видеокамере с
использованием кабеля LANC (не прилага-
ется), то монтаж будет еще более точный.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR840E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR840E in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR840E

Sony CCD-TR840E User Manual - German - 116 pages

Sony CCD-TR840E User Manual - Dutch, French - 116 pages

Sony CCD-TR840E User Manual - Italian - 116 pages

Sony CCD-TR840E User Manual - Portuguese, Spanish - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info