50013
66
Zoom out
Zoom in
Previous page
1/116
Next page
66
– CCD-TR845E only
You can locate the beginning of a desired
programme easily by marking an index signal
during recording or playback and searching for it
later.
We recommend you to connect the camcorder to
your TV or VCR to view the picture on the TV
screen. If the viewfinder indicators do not
appear on the TV screen during operation, press
DISPLAY on the Remote Commander.
Marking an index signal
You can mark an index signal during recording
or playback.
When marking at the beginning of
recording or playback
Press INDEX MARK on the Remote Commander
in recording standby or playback pause mode.
The INDEX MARK indicator appears in the
viewfinder with the MARK indicator flashing.
When recording or playback starts, the MARK
indicator stops flashing. This shows that the
index signal is being marked. Then the INDEX
MARK indicator will disappear.
Locating the
marking position
Notes on the tape counter
Something must be recorded on the tape in
order for the tape counter to function. Tape
counter does not work on a blank tape.
There may be a discrepancy of several seconds
from the actual time.
Notes on ZERO MEM
When you press ZERO MEM, the counter’s
zero point is memorized. Press ZERO MEM
again before rewinding to cancel the memory.
This function is cancelled automatically once
the tape is rewound or advanced to the point
you pre-registered.
ZERO MEM does not function during
recording or playing back.
Returning to a pre-registered
position
Возврат к предварительно
зарегистрированной позиции
Примечания к счетчику ленты
Что-нибудь должно быть записано на ленте,
чтобы счетчик ленты функционировал.
Счетчик ленты не работает при
незаписанной ленте.
Может быть расхождение на несколько
секунд с фактическим временем.
Примечания к ZERO MEM
Когда Вы нажимаете ZERO MEM, нулевая
точка счетчика запоминается. Перед
перемоткой назад снова нажмите ZERO
MEM для стирания памяти.
Данная функция отменяется
автоматически, когда лента перемотается
назад или вперед до точки, которую Вы
запомнили.
ZERO MEM не функционирует во время
записи или воспроизведения.
Нахождение
отмеченной позиции
– Только CCD-TR845E
Вы можете легко обнаружить начало желаемой
программы путем записи индексного сигнала во
время записи или воспроизведения и
выполнения его поиска потом.
Мы рекомендуем Вам подсоединить
видеокамеру к Вашему телевизору или КВМ
для просмотра изображения на экране
телевизора. Если индикаторы видоискателея
не появляются на экране телевизора во
время работы, нажмите кнопку DISPLAY на
пульте дистанционного управления.
Запись индексного сигнала
Вы можете записать индексный сигнал во
время записи или воспроизведения.
При отметке в начале записи или
воспроизведения
Нажмите INDEX MARK на пульте
дистанционного управления в режиме
готовности или паузы воспроизведения.
Индикатор INDEX MARK появляется в
видоискателе с мигающим индикатором
MARK. Когда запись или воспроизведение
начинается, индикатор MARK перестает
мигать. Это показывает на то, что индексный
сигнал записан. Затем индикатор INDEX
MARK исчезает.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR840E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR840E in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR840E

Sony CCD-TR840E User Manual - German - 116 pages

Sony CCD-TR840E User Manual - Dutch, French - 116 pages

Sony CCD-TR840E User Manual - Italian - 116 pages

Sony CCD-TR840E User Manual - Portuguese, Spanish - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info