50013
61
Zoom out
Zoom in
Previous page
1/116
Next page
61
Advanced operations / Усовершенствованные операции
Optimizing the
recording condition
Use this feature to check the tape condition
before recording, so that you can get the best
possible picture (ORC).
(1) While the camcorder is in Standby mode,
press MENU to display the menu.
(2) Turn the control dial to select Ò, then press
the dial.
(3) Turn the control dial to select ORC TO SET,
then press the dial.
“START/STOP KEY” flashes.
(4) Press START/STOP.
The camcorder takes about 5 seconds to check
the tape condition and then returns to
Standby mode.
1
4
STBY 0:00:00
ORC
MENU
L
O
C
K
START/STOP
S
T
A
N
D
B
Y
START/STOP
KEY
3
TAPE SET
REC MODE
ORC TO SET
REMAIN
RETURN
TAPE SET
SP
REC MODE
ORC TO SET
REMAIN
RETURN
TAPE SET
REC MODE
ORC TO SET
REMAIN
2
Each time you insert the cassette
Perform the above procedures.
Notes on the ORC function
When you set ORC TO SET, the recording on
the tape is erased for about 0.1 second so that
the camcorder can check the tape condition. Be
careful when you use a recorded tape. The 0.1
second blank is erased if you record from the
point where you set ORC TO SET for more than
2 seconds, or if you record over the blank.
You cannot use this function on a tape with the
red mark on the cassette exposed.
Оптимизация
состояния записи
Используйте данную функцию для проверки
состояния ленты перед записью, так, чтобы
Вы могли получить наилучшее по
возможности изображение (ORC).
(1)Когда видеокамера будет находится в
режиме готовности, нажмите MENU для
отображения меню.
(2)Нажмите регулировочный диск для
выбора Ò, а затем нажмите диск.
(3)Поверните регулировочный диск для
выбора ORC TO SET, а затем нажмите
диск.
“START/STOP KEY” будет мигать.
(4)Нажмите START/STOP.
Видеокамере требуется около 5 секунд
для проверки состояния ленты, а затем
она возвращается в режим готовности.
Каждый раз, когда Вы вставляете
кассету
Выполняйте вышеописанную процедуру.
Примечания к функции ORC
Когда Вы устанавливаете ORC TO SET,
запись ленты стирается на 0,1 секунды, так,
чтобы видеокамера смогла проверить
состояние ленты. Будьте осторожны, когда
Вы используете записанную ленту. 0,1-
секундный пробел исчезает, если Вы
начинаете запись от точки, где Вы
установили ORC TO SET более, чем на 2
секунды, или если производите запись
поверх незаписанной части.
Вы не можете использовать данную
функцию с лентой, если на кассете
вставлена красная метка.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR840E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR840E in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR840E

Sony CCD-TR840E User Manual - German - 116 pages

Sony CCD-TR840E User Manual - Dutch, French - 116 pages

Sony CCD-TR840E User Manual - Italian - 116 pages

Sony CCD-TR840E User Manual - Portuguese, Spanish - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info