49966
60
Zoom out
Zoom in
Previous page
1/116
Next page
60
Notes
The battery pack is quickly discharging while
the built-in light is turned on. Slide LIGHT to
OFF when not in use.
When you do not use your camcorder, slide
LIGHT to OFF and remove the battery pack to
avoid turning on the built-in light.
When flickering occurs while shooting in the
auto mode, slide LIGHT to ON.
The built-in light may turn on/off when you
use the PROGRAM AE or backlight function
while shooting in the auto mode.
The built-in light may be turned off when
inserting or ejecting a cassette.
Replacing the bulb
Use the Sony XB-3D halogen lamp (not
supplied). The supplied halogen lamp is not on
the market. Purchase the Sony XB-3D halogen
lamp.
Remove the power source before replacing the
bulb.
(1)Remove the built-in light unit while pushing
the hole under the built-in light unit using a
wire.
(2)Turn the bulb housing counterclockwise and
detach from the built-in light unit.
(3)Replace the bulb using a dry cloth.
(4)Attach the bulb housing turning it clockwise,
then replace the built-in light unit.
Using the built-in light
Использование встроенной
подсветки
Примечания
Батарейный блок быстро разряжается при
включенной подсветке. Передвиньте
переключатель LIGHT в положение OFF,
если подсветка не используется.
Если Вы не используете Вашу видеокамеру,
передвиньте переключатель LIGHT в
положение OFF и выньте батарейный блок во
избежание включения встроенной подсветки.
В случае мерцания во время съемки в
автоматическом режиме передвиньте
переключатель LIGHT в положение ON.
Встроенная подсветка может включаться/
выключаться при использовании функции
PROGRAM AE или функции задней подсветки
во время съемки в автоматическом режиме.
Встроенная подсветка может выключаться
при установке или извлечении кассеты.
Замена лампы накаливания
Используйте галогенную лампу Sony XB-3D
(не прилагается). Прилагаемая галогенная
лампа не поступает в розничную продажу.
Приобретите галогенную лампу Sony XB-3D.
Перед заменой лампы накаливания выньте
источник питания.
(1)Выньте встроенное устройство подсветки,
нажав на отверстие под встроенным
устройством с помощью проволоки.
(2)
Поверните корпус лампы накаливания
против часовой стрелки и отсоедините
лампу от встроенного устройства подсветки.
(3)Отсоедините лампу накаливания с
помощью сухой ткани.
(4)
Прикрепите корпус лампы накаливания,
повернув его по часовой стрелке, и
замените встроенное устройство подсветки.
1
23
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR717E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR717E in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR717E

Sony CCD-TR717E User Manual - German - 116 pages

Sony CCD-TR717E User Manual - Dutch, French - 116 pages

Sony CCD-TR717E User Manual - Italian - 116 pages

Sony CCD-TR717E User Manual - Portuguese, Spanish - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info