49911
33
Zoom out
Zoom in
Previous page
1/100
Next page
33
Opérations avancées / Fortgeschrittener Betrieb
ORC TO SET*
Sélectionnez ce paramètre pour ajuster le
caméscope de manière optimale pour
l’enregistrement.
Si vous avez déjà effectué un contrôle de bande,
“ORC ON” est affiché.
ORC est l’abréviation de “Optimizing the
Recording Condition” (optimisation des
conditions d’enregistrement).
CLOCK SET*
Choisissez ce paramètre pour régler la date et
l’heure.
AUTO DATE* <ON/OFF>
Sélectionnez ON pour que la date soit
automatiquement enregistrée pendant 10
secondes au début de l’enregistrement.
Sélectionnez OFF si vous ne voulez pas que la
date soit enregistrée.
DEMO MODE* <ON/OFF>
Sélectionnez ON pour que la démonstration
apparaisse.
Sélectionnez OFF pour désactiver le mode de
démonstration.
Remarques sur le mode de démonstration
DEMO MODE a été réglé sur STBY (attente)
en usine et la démonstration commence
environ 10 minutes après le réglage de
l’interrupteur POWER sur CAMERA, si
aucune cassette n’est insérée.
Vous ne pouvez pas sélectionner STBY de
DEMO MODE dans le menu.
Vous ne pouvez pas sélectionner DEMO
MODE quand une cassette est insérée dans
le caméscope.
Si vous insérez une cassette pendant la
démonstration, la démonstration s’arrête et
vous pouvez filmer comme d’habitude.
DEMO MODE revient automatiquement au
réglage STBY.
Quand le paramètre NIGHTSHOT est réglé
sur ON, “NIGHTSHOT” apparaît dans le
viseur et la démonstration ne commence
pas.
Pour regarder la démonstration
Si une cassette est insérée, éjectez-la.
Sélectionnez ON de DEMO MODE puis
fermez le menu.
La démonstration commence.
Lorsque vous éteignez le caméscope, DEMO
MODE revient automatiquement au réglage
STBY.
Changement des réglages de
modes
ORC TO SET*
Durch Wahl dieses Parameters paßt sich der
Camcorder automatisch optimal an das Band an.
Wenn bereits eine Anpassung vorgenommen
wurde, erscheint die Anzeige „ORC ON“.
ORC steht für “Optimizing the Recording
Condition” (Optimieren der Aufnahmequalität).
CLOCK SET*
Dieser Parameter dient zum Einstellen von
Datum und Uhrzeit.
AUTO DATE* <ON/OFF>
Auf ON stellen, wenn beim Aufnahmestart das
Datum 10 Sekunden lang aufgezeichnet werden
soll.
Auf OFF stellen, wenn das Datum nicht
aufgezeichnet werden soll.
DEMO MODE* <ON/OFF>
Auf ON stellen, um den Demonstrationsbetrieb
zu aktivieren.
Auf OFF stellen, um den
Demonstrationsbetrieb abzuschalten.
Hinweise zu DEMO MODE
Werksseitig ist DEMO MODE auf STBY
(Standby, Bereitschaft) eingestellt. Wenn im
Camcorder keine Cassette eingelegt ist und
der POWER-Schalter auf CAMERA gestellt
wird, beginnt bei dieser Einstellung
automatisch nach etwa zehn Minuten ein
Demonstrationsbetrieb.
Beachten Sie, daß DEMO MODE im Menü
nicht auf STBY eingestellt werden kann.
Wenn eine Cassette in den Camcorder
eingelegt ist, kann DEMO MODE nicht
gewählt werden.
Wenn eine Cassette während des
Demonstrationsbetriebs eingelegt wird,
stoppt der Demonstrationsbetrieb. Sie
können dann in gewohnter Weise mit der
Aufnahme beginnen. DEMO MODE wird
anschließend automatisch wieder auf STBY
gesetzt.
Wenn NIGHTSHOT auf ON steht, erscheint
“NIGHTSHOT” im Sucher und der
Demonstrationsbetrieb beginnt nicht.
Sofortiges Starten des
Demonstrationsbetriebs
Nehmen Sie die Cassette heraus, stellen Sie
DEMO MODE auf ON, und schalten Sie die
Menüanzeige ab. Der Demonstrationsbetrieb
beginnt dann.
Wenn Sie den Camcorder ausschalten, wird
DEMO MODE wieder auf STBY gesetzt.
Menüeinstellungen
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR516E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR516E in the language / languages: German, French as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR516E

Sony CCD-TR516E User Manual - English - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info