49839
85
Zoom out
Zoom in
Previous page
1/132
Next page
85
Advanced Operations / Усовершенствованные операции
Notes on marking
Make sure you mark index signals at more than
two-minute intervals. Otherwise, you may not
be able to search for them correctly.
If you stop recording while the index signal is
being marked (the INDEX MARK indicator
lights in the viewfinder), the search may not be
completed correctly.
If you mark an index signal on the tape with the
Data Code recorded, the Data Code will be
erased at the point on which the index signal is
marked. When playing back this tape, the
camcorder keeps displaying the Data Code
immediately before the erased one.
A black band appears when you mark index
signal during playback, and the sound is not
recorded. This does not affect the picture and
the sound that are already recorded.
You cannot mark an index signal on a tape with
the red mark on the cassette exposed, or on a
tape recorded in LP mode.
An index signal is marked automatically when
you start recording with the POWER switch to
VTR. When you start recording from recording
pause mode, however, an index signal is not
marked.
You cannot mark an index signal on an NTSC-
recorded tape.
Locating the marking position
Примечания к записи индексного сигнала
Вы должны обязательно записывать
индексные сигналы с более, чем
двухминутными интервалами. В противном
случае Вы не сможете находить их
правильно.
Если вы остановите запись во время
записи индексного сигнала (индикатор
INDEX MARK светится в видоискателе),
поиск может быть выполнен неправильно.
Если Вы записываете индексный сигнал на
ленте с кодом данных, то код данных
будет стерт в точке, в которой записан
индексный сигнал. При воспроизведении
такой ленты видеокамера отображает код
данных непосредственно до того, который
был стерт.
Черная полоса появляется, когда вы
записываете индексный сигнал во время
воспроизведения, и звук прослушиваться
не будет. Это не влияет на звук и
изображение которые уже записаны.
Вы не можете записать индексный сигнал
на ленте, если на кассете видна красная
метка, или на ленте, записанной в режиме
LP.
Индексный сигнал записывается
автоматически, если Вы начинаете запись
при установке выключателя POWER в
положение VTR. Однако, если Вы
начинаете запись в режиме паузы записи,
индексный сигнал записываться не будет.
Вы не можете записать индексный сигнал
на ленте, записанной в системе NTSC.
Нахождение отмеченной
позиции
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR3400E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR3400E in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR3400E

Sony CCD-TR3400E User Manual - German, French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info