49839
80
Zoom out
Zoom in
Previous page
1/132
Next page
80
To return to automatic white balance
adjustment mode
Press WHT BAL so that the one push white
balance indicator disappears in the viewfinder.
Note on the one push white balance mode
indicator
Slowly flashing indicator: white balance has not
been set.
Quickly flashing indicator: white balance is being
adjusted with the control dial.
Lighting: white balance has been set.
Note on the one push white balance mode
setting
The white balance setting for one push white
balance mode is retained even when you turn the
power off or change white balance mode, as long
as the power source is installed in the camcorder.
The setting is retained for about 1 hour even
when you disconnect the power source if the
lithium battery is installed in the camcorder.
If the one push white balance indicator does
not stop flashing when you press the control
dial
The lighting is probably insufficient or you have
forgotten to put the white lens cap on. If this
appears to be the case, increase the lighting or
attach the white cap and try again. If the
indicator still continues to flash after trying this,
press WHT BAL to set the camcorder to the
automatic white balance mode (no indicator) or
set AUTO LOCK/HOLD to AUTO LOCK.
Для возврата к режиму
автомтаической регулировки баланса
белого
Нажмите WHT BAL так, чтобы индикатор
баланса белого одним нажатием исчез из
видоискателя.
Примечание к индикатору режима баланса
белого одним нажатием
Медленное мигание индикатора: баланс
белого не был установлен.
Быстрое мигание индикатора: баланс белого
регулируется с помощью регулировочного
диска.
Горение: бланс белого был установлен.
Примечание к установке режима баланса
белого одним нажатем
Установка баланса белого для режима
баланса белого одним нажатием
сохраняется, даже когда Вы выключаете
питание или изменяете режим баланса
белого, до тех пор, пока источник питания
установлен в видеокамере. Установка
сохраняется около 1 часа, даже, когда Вы
отсоединяете источник питания, если
литиевая батарейка установлена в
видеокамере.
Если индикатор бланса белого одним
нажатием не перестает мигать, когда Вы
нажимаете регулировочный диск.
Вероятно освещения недостаточное или Вы
забыли установить белую крышку
объектива. Если это случится, усильте свет
или прикрепите белую крышку и попробуйте
снова. Если индикатор все еще продолжает
мигать даже после такой попытки, нажмите
WHT BAL для установки видеокамеры на
автоматический режим баланса белого (нет
индикатора) или установите AUTO LOCK/
HOLD на AUTO LOCK.
Adjusting the white balance Регулировка баланса белого
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR3400E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR3400E in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR3400E

Sony CCD-TR3400E User Manual - German, French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info