49782
69
Zoom out
Zoom in
Previous page
1/105
Next page
69
Advanced operations / Operaciones avanzadas
To stop recording
Press p.
Replacing recording on a tape
(insert editing)
You can insert a new scene from a VCR onto your
originally recorded tape by specifying starting
and ending points.
Connections are the same as in “Recording from
a VCR or TV” on the previous page.
(1)While pressing the small green button on the
POWER switch, set it to VTR.
(2)On the VCR, locate the start point to be
inserted and set it to playback pause mode.
(3)On the camcorder, press ( to set it to
playback mode, and then locate the point
where the insert should end by pressing 0
or ). Then press P to set it to playback
pause mode.
(4)Press DISPLAY to display the counter, and
then press COUNTER RESET to set the
counter to zero.
(5)On the camcorder, locate the point where the
insert should begin by pressing 0, then
press r REC to set it to recording pause
mode.
(6)Press ZERO MEM on the Remote
Commander. The ZERO MEM indicator
flashes and the end point of the insert is stored
in memory.
(7)Press P on the camcorder and the VCR
simultaneously to start insert editing.
The insert editing stops automatically near the
counter's zero point. Press p to set the
camcorder to stop mode.
To change the end point
Press ZERO MEM on the Remote Commander so
that the ZERO MEM indicator disappears and
begin from step 3.
Notes on the inserted picture
The picture may be distorted at the end of the
inserted portion when it is played back.
You cannot use the insert editing function when
COUNTER is set to TIME CODE in the menu
system.
Para detener la grabación
Pulse p.
Sustitución de una grabación en
una cinta (inserción de edición)
Es posible insertar escenas nuevas procedentes
de videograbadoras en cintas grabadas
originalmente especificando los puntos inicial y
final.
Las conexiones son las mismas que en
“Grabación desde una videograbadora o un
televisor” en la página anterior.
(1)Deslice el interruptor POWER a VTR mientras
pulsa el botón verde pequeño del interruptor.
(2)Localice en la videograbadora el punto inicial
que va a insertar y ajústela en modo de pausa
de reproducción.
(3)Pulse ( en la videocámara para ajustarla en
el modo de reproducción y, a continuación,
localice el punto final de la inserción con las
teclas 0 o ). Después, pulse P para
ajustarla en el modo de pausa de
reproducción.
(4)Pulse DISPLAY para que aparezca el contador
y, a continuación, pulse COUNTER RESET
para ajustar el contador a cero.
(5)Pulse 0 para localizar el punto donde debe
comenzar la inserción en la videocámara y
después pulse r REC y para ajustarla en
modo de pausa de grabación.
(6)Pulse ZERO MEM en el mando a distancia. El
indicador ZERO MEM parpadeará y el punto
final de la inserción se almacenará en la
memoria.
(7)Pulse P simultáneamente en la videocámara y
la videograbadora para comenzar la edición
de inserción.
La edición de inserción se detiene
automáticamente cerca del punto cero del
contador. Pulse p para ajustar la videocámara en
el modo de parada.
Para cambiar el punto final
Pulse ZERO MEM en el mando a distancia para
que desaparezca el indicador ZERO MEM y
comience desde el paso 3.
Notas sobre la imagen insertada
La imagen puede distorsionarse al final de la
porción insertada al reproducirla.
Si ajusta COUNTER en TIME CODE en el
sistema de menú, no será posible emplear la
función de edición de inserción.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-SC55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-SC55 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-SC55

Sony CCD-SC55 User Manual - English - 105 pages

Sony CCD-SC55 User Manual - German, French - 107 pages

Sony CCD-SC55 User Manual - French - 81 pages

Sony CCD-SC55 User Manual - Spanish - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info