49782
65
Zoom out
Zoom in
Previous page
1/105
Next page
65
Advanced operations / Operaciones avanzadas
To write the RC time code from the
end of the RC time code recorded
portion
Rewind the tape to the portion on which the RC
time code has been written and set the camcorder
to playback pause mode. Then follow steps 5
and 6 on the previous page. The RC time code is
written continuously.
Notes on writing the RC time code
The RC time code writing stops when:
you press TIME CODE WRITE again before
starting playback.
you press INDEX before starting playback.
you change from playback mode to another
mode.
When you are writing the RC time code from
the middle of a tape without the time code
written, writing starts several frames before the
current picture.
If you write the RC time code on a recorded
tape, the Data Code and index signal are
erased.
The RC time code written in LP mode may not
be read correctly.
You cannot mark the RC time code on a tape
with its record protect tab out (red).
When you are writing the RC time code, the
sound cannot be heard and a black band
appears at the bottom of the picture.
Note on --:--:--:-- indicator
The --:--:--:-- indicator appears during playback
if:
nothing is recorded.
the RC time code is unreadable because of the
damage of the tape or because of the noise.
you recorded using another VCR without RC
time code function.
you erase the index signal or make PCM after
recording on another VCR in the portion on
which the RC time code is written.
In this case, we recommend you to rewrite the
RC time code.
Para escribir el código de tiempos RC
desde el final de la porción grabada
del código de tiempos RC
Rebobine la cinta hasta la porción en que se haya
escrito el código de tiempos RC y ajuste la
videocámara en modo de pausa de reproducción.
Después siga los pasos 5 y 6 de la página
anterior. El código de tiempos RC se escribirá
continuamente.
Notas sobre la escritura del código de tiempos
RC
La escritura del código de tiempos RC se
detiene cuando:
se vuelve a pulsar TIME CODE WRITE antes de
empezar la reproducción.
se pulsa INDEX antes de empezar la
reproducción.
se cambia de modo de reproducción a otro
modo.
Cuando se escribe el código de tiempos RC
desde el medio de una cinta que no contiene el
código de tiempos escrito, la escritura comienza
varios fotogramas antes de la imagen actual.
Si escribe el código de tiempos RC en una cinta
grabada, el código de datos y la señal de índice
se borrarán.
El código de tiempos RC escrito en modo LP
puede no leerse correctamente.
El código de tiempos RC no puede marcarse en
cintas con la lengüeta de protección contra
grabación al descubierto (roja).
Mientras escribe el código de tiempos RC, el
sonido no se oye y aparece una banda negra en
la parte inferior de la imagen.
Nota sobre el indicador --:--:--:--
El indicador --:--:--:-- aparece durante la
reproducción si:
no se graba nada.
el código de tiempos RC es ilegible por estar la
cinta dañada o por ruidos.
ha grabado con otra videograbadora que no
posee función de código de tiempos RC.
ha borrado la señal de índice o ha realizado una
reproducción PCM después de grabar en otra
videograbadora en la porción en que se ha
escrito el código de tiempos RC.
En este caso, es recomendable volver a escribir el
código de tiempos RC.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-SC55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-SC55 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-SC55

Sony CCD-SC55 User Manual - English - 105 pages

Sony CCD-SC55 User Manual - German, French - 107 pages

Sony CCD-SC55 User Manual - French - 81 pages

Sony CCD-SC55 User Manual - Spanish - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info