141912
18
Zoom out
Zoom in
Previous page
1/35
Next page
KDL-40S30xx
KDL-40D26xx
KDL-40T30xx
KDL-32D27xx
KDL-32T28xx
KDL-40D27xx
KDL-40T28xx
KDL-32S30xx
KDL-32D26xx
KDL-32T30xx
© 2007 Sony Corporation
LCD Digital Colour TV
3-198-502-13(1)
U
Operating Instructions
Before operating the TV, please read the “Safety
information” section of this manual.
Retain this manual for future reference.
For useful information about Sony products
010COV.fm Page 1 Friday, July 13, 2007 5:03 PM
2
GB
NOTICE FOR
CUSTOMERS IN THE
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 10
AMP fuse approved by ASTA or BSI to BS 1362 (i.e.,
marked with or ) must be used.
When an alternative type of plug is used it should be fitted
with a 10 AMP FUSE (KDL-32D27xx, KDL-32T28xx,
KDL-32S30xx, KDL-32D26xx, KDL-32T30xx), 13 AMP
FUSE (KDL-40D27xx, KDL-40T28xx, KDL-40S30xx,
KDL-40D26xx, KDL-40T30xx) otherwise the circuit should
be protected by a 10 AMP FUSE (KDL-32D27xx, KDL-
32T28xx, KDL-32S30xx, KDL-32D26xx, KDL-32T30xx),
13 AMP FUSE (KDL-40D27xx, KDL-40T28xx, KDL-
40S30xx, KDL-40D26xx, KDL-40T30xx) at the distribution
board.
If the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the
fuse. Never use the plug without the fuse cover. If you should
lose the fuse cover, please contact your nearest Sony service
station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and
replace the fuse.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall
be handed over to the applicable
collection point for the recycling
of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more
detailed information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly
and retain it for future reference.
Any functions related to Digital TV ( ) will only
work in countries or areas where DVB-T (MPEG2) digital
terrestrial signals are broadcast or where you have access
to a compatible DVB-C (MPEG2) cable service. Please
confirm with your local dealer if you can receive a DVB-
T signal where you live or ask your cable provider if their
DVB-C cable service is suitable for integrated operation
with this TV.
The cable provider may charge an additional fee for such
a service and you may be required to agree to their terms
and conditions of business.
Although this TV set follows DVB-T and DVB-C
specifications, compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be
guaranteed.
Some Digital TV functions may not be available in some
countries/regions and DVB-C cable may not operate
correctly with all providers.
For more information about DVB-C functionality please
see our cable support site:
http://support.sony-europe.com/tv/DVBC
.
is a registered trademark of the DVB Project
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of the
following US patents: 5510752, 5736897. BBE and BBE
symbol are registered trademarks of BBE Sound, Inc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
~
The illustrations used in this manual are of the
KDL-32D2710 unless otherwise state.
The "xx" that appears on the model name, corresponds to
two numeric digits related to colour variation.
Disposal of the TV set
FUSE
Introduction
Notice for Digital TV function
Trademark information
DIGITAL
010COV.book Page 2 Friday, July 13, 2007 5:05 PM
3
GB
Table of Contents
Start-up Guide 4
Safety information .....................................................................................................................7
Precautions ...............................................................................................................................8
Overview of the remote ..........................................................................................................9
Overview of the TV buttons and indicators........................................................................10
Watching TV............................................................................................................................11
Checking the Digital Electronic Programme Guide (EPG) ............................................13
Using the Digital Favourite list ......................................................................................15
Connecting optional equipment...............................................................................................16
Viewing pictures from connected equipment ..........................................................................17
Using HDMI control.................................................................................................................18
Navigating through menus ......................................................................................................19
Picture Adjustment menu........................................................................................................20
Sound Adjustment menu.........................................................................................................22
Features menu........................................................................................................................24
Set-up menu............................................................................................................................26
Digital Set-up menu .....................................................................................................29
Specifications..........................................................................................................................31
Troubleshooting ......................................................................................................................33
Start-up Guide 4
Watching TV
Using Optional Equipment
Using MENU Functions
Additional Information
GB
: for digital channels only
010COV.book Page 3 Friday, July 13, 2007 5:05 PM
4
GB
Start-up Guide
1: Checking the
accessories
Mains lead (1) (only for KDL-40S30xx, KDL-40D27xx,
KDL-40D26xx, KDL-40T28xx, KDL40T30xx)
Coaxial cable* (1) (only for KDL-40S30xx, KDL-
40D27xx, KDL-40D26xx, KDL-40T28xx, KDL40T30xx)
Remote RM-ED009 (1)
Size AA batteries (R6 type) (2)
Support belt (1) and screws (2)
To insert batteries into the remote
~
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix old
and new batteries.
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of batteries. Please
consult your local authority.
Handle the remote with care. Do not drop or step on it, or
spill liquid of any kind onto it.
Do not place the remote in a location near a heat source, a
place subject to direct sunlight, or a damp room.
2: Connecting an aerial/
VCR
Push and lift the cover to open.
C
onnecting an aerial/cable
Connecting an aerial/cable and VCR
Coaxial cable*
Scart lead (not supplied)
VCR
Coaxial cable
(not supplied)
Coaxial cable*
Terrestrial signal
or cable
Terrestrial signal
or cable
010COV.book Page 4 Friday, July 13, 2007 5:05 PM
5
GB
Start-up Guide
3: Preventing the TV
from toppling over
~
For models with swivel stand (KDL-32T30xx, KDL-
40T30xx) do not tense the support belt.
4: Connecting the
cables
5: Bundling the cables
6:
Selecting the language
and country/region
1 Connect the TV to your mains socket
(220-240V AC, 50Hz).
2 Press 1 on the TV (top side).
When you switch on the TV for the first time, the
Language menu appears on the screen.
3 Press F/f to select the language displayed on the
menu screens, then press .
KDL-40S30xx
KDL-40D27xx
KDL-40D26xx
KDL-40T28xx
KDL-40T30xx
3,4
Auto Start Up
Language
Country
Select:
Confirm:
Continued
010COV.book Page 5 Friday, July 13, 2007 5:05 PM
6
GB
4 Press F/f to select the country/region in
which you will operate the TV, then press
.
If the country/region in which you want to use the
TV does not appear in the list, select “-” instead of
a country/region.
7: Auto-tuning the TV
1 Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 4) and start play
back.
The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.
2 Press .
3 Press F/f to select “Antenna” or “Cable”,
then press .
If you select “Cable”, the screen for selecting the
scan type appears. See “To tune the TV for Cable
connection” (page 6).
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the aerial
connection
No digital or analogue channels were found.
Check all the aerial/cable connection and then
press to start auto-tuning again.
4 When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 26).
If you do not change the order in which the
analogue channels are stored on the TV, go to
step 5.
5 Press MENU to exit.
The TV has now tuned in all the available
channels.
~
When a digital broadcast channel cannot be received, or
when selecting a region in which there are no digital
broadcasts in step 4 (page 6), the time must be set after
performing step 5.
To tune the TV for Cable connection
1 press .
2 Press F/f to select “Quick Scan” or “Full
Scan”, then press .
"Quick Scan" : channels are tuned according to
the cable operator information within the
broadcast signal.
Recommended setting for "Frequency", "Network
ID" and "Symbol Rate" is "Auto".
This option is recommended for fast tuning when
supported by your cable operator.
If the "Quick Scan" does not tune, please use the
"Full Scan" method below.
"Full Scan" : All available channels are tuned
and stored. This procedure may take some time.
This option is recommended when "Quick Scan"
is not supported by your cable provider.
For further information about supported cable
providers, refer to support web site:
http://support.sony-europe.com/TV/DVBC
3 Press G/g/f to select “Start”.
The TV starts searching for channels. Do not press
any buttons on the TV or remote.
~
Some cable providers do not support “Quick Scan”. If no
channels are detected using “Quick Scan”, perform “Full
Scan”.
Detaching the Table-
Top Stand from the TV
~
Do not remove the Table-Top Stand for any reason other than
to wall-mount the TV.
Auto Start Up
Language
Country
Select:
Confirm:
Back:
Back:
Start:
Cancel:
MENU
Do you want to start automatic tuning?
KDL-40S30xx
KDL-40D27xx
KDL-40D26xx
KDL-40T28xx
KDL-40T30xx
KDL-32S30xx
KDL-32D27xx
KDL-32D26xx
KDL-32T28xx
KDL-32T30xx
010COV.book Page 6 Friday, July 13, 2007 5:05 PM
7
GB
Safety information
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
The TV set should be installed near an easily accessible
mains socket.
Place the TV set on a stable, level surface.
Only qualified service personnel should carry out wall
installations.
For safety reasons, it is strongly recommended that you
use Sony accessories, including:
Wall-mount bracket SU-WL500
Transporting
Before transporting the TV set,
disconnect all cables.
Two or three people are needed to
transport a large TV set.
When transporting the TV set by
hand, hold it as shown on the right.
When lifting or moving the TV set,
hold it firmly from the bottom. Do
not put stress on the LCD panel.
When transporting the TV set, do
not subject it to jolts or excessive
vibration.
When transporting the TV set for
repairs or when moving, pack it using the original carton
and packing material.
Ventilation
Never cover the ventilation holes or insert anything in the
cabinet.
Leave space around the TV set as shown below.
It is strongly recommended that you use a Sony wall-
mount bracket in order to provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent the collection of
dirt or dust:
Do not lay the TV set flat, install upside down,
backwards, or sideways.
Do not place the TV set on a shelf, rug, bed or in a
closet.
Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
Do not install the TV set as shown below.
Mains lead
Handle the mains lead and socket as follows in order
to avoid any risk of fire, electrical shock or damage
and/or injuries:
Connect the TV set using a three-wire grounding type
mains plug to a mains socket with a protective earthing
connection (only for KDL-40S30xx, KDL-40D27xx,
KDL-40D26xx, KDL-40T28xx, KDL-40T30xx).
Use only Sony mains leads, not those of other brands.
Insert the plug fully into the mains socket.
Operate the TV set on a 220-240 V AC supply only.
When wiring cables, be sure to unplug the mains lead
for your safety and care not to catch your feet on the
cables.
Disconnect the mains lead from the mains socket before
working on or moving the TV set.
Keep the mains lead away from heat sources.
Unplug the mains plug and clean it regularly. If the plug
is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm10 cm
6 cm
Leave at least this space around the set.
Air circulation
is blocked.
Air circulation
is blocked.
Wall
Wall
Continued
010COV.book Page 7 Friday, July 13, 2007 5:05 PM
8
GB
Notes
Do not use the supplied mains lead on any other
equipment.
Do not pinch, bend, or twist the mains lead excessively.
The core conductors may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains lead.
Do not pull on the mains lead itself when disconnecting
the mains lead.
Do not connect too many appliances to the same mains
socket.
Do not use a poor fitting mains socket.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those listed below,
or the TV set may malfunction and cause a fire,
electrical shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the seashore, on a ship or
other vessel, inside a vehicle, in medical institutions, near
flammable objects (candles, etc).
Environment:
Places that are hot, humid, or excessively dusty; where
insects may enter; where it might be exposed to mechanical
vibration; unstable locations; near water, rain, moisture or
smoke.
Situation:
Do not use when your hands are wet, with the cabinet
removed, or with attachments not recommended by the
manufacturer. Disconnect the TV set from mains socket and
aerial during lightning storms.
Broken pieces:
Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
If the surface of the TV set cracks, do not touch it until you
have unplugged the mains lead. Otherwise electric shock
may result.
When not in use
If you will not be using the TV set for several days, the TV
set should be disconnected from the mains for
environmental and safety reasons.
As the TV set is not disconnected from the mains when the
TV set is just turned off, pull the plug from the mains to
disconnect the TV set completely.
However, some TV sets may have features that require the
TV set to be left in standby to work correctly.
For children
Do not allow children to climb on the TV set.
Keep small accessories out of the reach of children, so that
they are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the mains lead
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it
checked by qualified service personnel.
When:
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped, hit or having
something thrown at it.
Any liquid or solid object falls through openings in the
cabinet.
Precautions
Viewing the TV
View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
The LCD screen contains a small amount of liquid crystal
and mercury. The fluorescent tubes used in this TV set
also contains mercury. Follow your local ordinances and
regulations for disposal.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the mains lead connected to the TV set
from mains socket before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
To remove dust from the screen surface/cabinet, wipe
gently with a soft cloth. If dust is persistent, wipe with a
soft cloth slightly moistened with a diluted mild detergent
solution.
Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
When adjusting the angle of the TV set, move it slowly so
as to prevent the TV set from moving or slipping off from
its table stand
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
010COV.book Page 8 Friday, July 13, 2007 5:05 PM
9
GB
Overview of the remote
1 "/1 – TV standby
Turns the TV on and off from standby mode.
2 A/B – Dual Sound (page 22)
3 Coloured buttons (page 12, 13, 15)
4 / – Input select / Text hold
In TV mode: Selects the input source from equipment connected to the TV
sockets (page 17).
In Text mode (page 12): Holds the current page.
5 F/f/G/g/
6 TOOLS (page 12, 18)
Enables you to access various viewing options and change/make adjustments
according to the source and screen format.
7 MENU (page 19)
8 THEATRE
You can set Theatre Mode on or off. When Theatre Mode is set to on,
the optimum audio output (if the TV is connected with an audio system using
an HDMI cable) and picture quality for film videos are automatically set.
9 Number buttons
In TV mode: Selects channels. For channel numbers 10 and above, enter the
second and third digit quickly.
In Text mode: Enters the three digit page number to select the page.
0 – Previous channel
Returns to the previous channel watched (for more than five seconds).
qa PROG +/-/ /
In TV mode: Selects the next (+) or previous (-) channel.
In Text mode (page 12): Selects the next ( ) or previous ( ) page.
qs % – Mute the sound
qd 2 +/- – Volume
qf / – Text (page 12)
qg DIGITAL – Digital mode (page 11)
qh ANALOG – Analogue mode (page 11)
qj RETURN /
Returns to the previous screen of any displayed menu.
qk – EPG (Digital Electronic Programme Guide) (page 13)
ql – Picture freeze (page 12)
Freezes the TV picture.
w; – Screen mode (page 12)
wa / – Info / Text reveal
In digital mode: Displays brief details of the programme currently being
watched.
In analogue mode: Displays information such as current channel number and
screen format.
In Text mode (page 12): Reveals hidden information (e.g. answers to a quiz).
z
The number 5, PROG + and A/B buttons have tactile dots. Use the tactile dots as
references when operating the TV.
If you turn the TV off, Theatre Mode is also turned off.
010COV.book Page 9 Friday, July 13, 2007 5:05 PM
10
GB
Overview of the TV buttons and indicators
1 (page 19)
2 / – Input select / OK
In TV mode: Selects the input source from
equipment connected to the TV sockets
(page 17).
In TV menu: Selects the menu or option, and
confirms the setting.
3 2 +/-/ /
In TV mode: Increases (+) or decreases (-) the
volume.
In TV menu: Moves through the options right
( ) or left ( ).
4 PROG +/-/ /
In TV mode: Selects the next (+) or previous
(-) channel.
In TV menu: Moves through the options up
( ) or down ( ).
5 1 – Power
Turns the TV on or off.
~
To disconnect the TV completely, pull the plug
from the mains.
6 – Picture Off / Timer indicator
Lights up in green when the picture is
switched off (page 24).
Lights up in orange when the timer is set
(page 25).
7 1 – Standby indicator
Lights up in red when the TV is in standby mode.
8 " – Power / Timer REC programme
indicator
Lights up in green when the TV is turned on.
Lights up in orange when the timer recording
is set (page 13).
Lights up in red during the timer recording.
9 Remote control sensor
Receives IR signals from the remote.
Do not put anything over the sensor, as its
function may be affected.
~
Make sure that the TV is completely turned off before
unplugging the mains lead. Unplugging the mains lead
while the TV is turned on may cause the indicator to
remain lit or may cause the TV to malfunction.
010COV.book Page 10 Friday, July 13, 2007 5:05 PM
18
GB
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 16), and make sure that images
from a PC appear on the screen.
~
You cannot display resolutions higher than WXGA (1280 ×
768 pixels).
1 Press TOOLS to display the Tools menu.
2 Press F/f to select “PIP”, then press .
The picture from the connected PC is displayed with
full size and the TV programme is displayed on the
right corner.
You can use
F/f/G/g to move the TV programme
screen position.
3 Press number buttons or PROG +/- to
select the TV channel.
To return to single picture mode
Press RETURN.
z
You can switch the audible picture by selecting “PC Sound/
TV Sound” from the Tools menu.
Using HDMI control
The HDMI control function allows equipment to
control each other using HDMI CEC (Consumer
Electronics Control) specified by HDMI.
You can perform interlocked control operations
between Sony HDMI control compatible equipment
such as a TV, DVD recorder with hard disk and audio
system by connecting the equipment with HDMI
cables.
Be sure to correctly connect and set the compatible
equipment to use the HDMI control function.
To connect the HDMI control compatible
equipment
Connect the compatible equipment and the TV with an
HDMI cable. When connecting an audio system, in
addition to the HDMI cable, be sure to also connect
the audio output socket
of the TV and the audio
system. For details, see page 16.
To make the HDMI control settings
HDMI control must be set on both the TV side and the
connected equipment side. See HDMI Set-up
(page 27) for the TV side settings. See the operating
instructions of the connected equipment for setting
details.
HDMI control functions
Turns the connected equipment off interlocked with
the TV.
Turns the TV on interlocked with the connected
equipment and automatically switches the input to
the equipment when the equipment starts to play.
If you turn on a connected audio system while the
TV is on, the input switches to the audio from the
audio system.
Adjusts the volume and mutes the sound of a
connected audio system.
Options Description
Close Closes the Tools menu.
Picture Mode (except
PC input mode)
See page 20.
Display Mode (in PC
input mode only)
See page 20.
Sound Effect See page 22.
Speaker See page 23.
PIP (in PC input
mode only)
See page 18.
H Centre (in PC input
mode only)
See page 25.
V Lines (in PC input
mode only)
See page 25.
Sleep Timer (except
PC input mode)
See page 25.
Power Saving See page 24.
010COV.book Page 18 Friday, July 13, 2007 5:05 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony bravia kdl-32t3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony bravia kdl-32t3000 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony bravia kdl-32t3000

Sony bravia kdl-32t3000 User Manual - German, Dutch, French, Italian - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info