479966
51
Zoom out
Zoom in
Previous page
1/64
Next page
Additional Information
51
GB
3D images from the HDMI (IN 1) or HDMI (IN
2) jack do not appear on the TV screen.
t Depending on the TV or video component, 3D
images may not appear.
No picture appears when the video output
resolution selected in [Output Video Format]
is incorrect.
t Press and hold N and VOL – on the unit for
more than 5 seconds to reset the video output
resolution to the lowest resolution.
The dark area of the picture is too dark/the
bright area is too bright or unnatural.
t Set [Picture Quality Mode] to [Standard]
(default) (page 30).
The picture is not output correctly.
t Check the [Output Video Format] settings in
[Screen Settings] (page 42).
t If the analog and digital signals are output at
the same time, set [BD-ROM 24p Output] or
[DVD-ROM 24p Output] in [Screen Settings]
to [Off] (page 42).
t For BD-ROMs, check the [BD-ROM 24p
Output] settings in [Screen Settings] (page 42).
Picture noise appears.
t Clean the disc.
t If the picture output from your system goes
through your VCR to get to your TV, the copy-
protection signal applied to some BD/DVD
programs could affect picture quality. If you
still experience problems even when you
connect your unit directly to your TV, try
connecting your unit to the other input jacks.
An image is not displayed on the entire TV
screen.
t Check the setting of [TV Type] in [Screen
Settings](page 42).
t The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV screen.
t If the speakers are used with a CRT-based TV
or projector, install the speakers at least 0.3
meters from the TV set.
t If the color irregularity persists, turn off the TV
set once, then turn it on after 15 to 30 minutes.
t Make sure that no magnetic object (magnetic
latch on a TV stand, health care device, toy,
etc.) is placed near the speakers.
There is no picture after playing a video/
photo file on the iPod/iPhone.
t Select the input on your TV for this system.
There is no sound.
t The speaker cords are not connected securely.
t Check the speaker settings (page 35).
The Super Audio CD sound of a component
that is connected to the HDMI (IN 1) or HDMI
(IN 2) jack is not output.
t HDMI (IN 1) and HDMI (IN 2) does not accept
an audio format that contains copy protection.
Connect the analog audio output of the
component to the AUDIO (AUDIO IN L/R)
jacks of the unit.
There is no sound from the TV via the HDMI
(OUT) jack when using the Audio Return
Channel function.
t Set [Control for HDMI] in [HDMI Settings] of
[System Settings] to [On] (page 45). Also, set
[Audio Return Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 45).
t Make sure that your TV is compatible with the
Audio Return Channel function.
t Make sure that an HDMI cable is connected to
a jack on your TV that is compatible with the
Audio Return Channel function.
The system does not output sound of TV
programs correctly when connected to a set-
top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 45).
t Check the connections (page 17).
Severe hum or noise is heard.
t Move your TV away from the audio
components.
t Clean the disc.
The sound loses stereo effect when you play
a CD.
t Select stereo sound by pressing AUDIO
(page 32).
Sound
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony BDV-NF620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony BDV-NF620 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony BDV-NF620

Sony BDV-NF620 Quick start guide - English - 16 pages

Sony BDV-NF620 Quick start guide - German - 20 pages

Sony BDV-NF620 User Manual - German - 66 pages

Sony BDV-NF620 User Manual - Dutch - 62 pages

Sony BDV-NF620 Quick start guide - Dutch - 20 pages

Sony BDV-NF620 Quick start guide - French - 20 pages

Sony BDV-NF620 User Manual - French - 62 pages

Sony BDV-NF620 Quick start guide - Italian, Polish - 20 pages

Sony BDV-NF620 Quick start guide - Portuguese - 20 pages

Sony BDV-NF620 User Manual - Portuguese - 62 pages

Sony BDV-NF620 Quick start guide - Spanish - 20 pages

Sony BDV-NF620 User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info