527827
27
Zoom out
Zoom in
Previous page
1/68
Next page
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\010COV.fm
masterpage: Right
BDV-EF1100
4-446-737-11(1)
4-446-737-11(1)
BDV-EF1100
Blu-ray Disc™/
DVD Home Theatre
System
Operating Instructions
2
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Left
Do not install the appliance in a confined
space, such as a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame
sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do
not expose this appliance to dripping or
splashing, and do not place objects filled with
liquids, such as vases, on the appliance.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
To prevent injury, this apparatus must be
securely attached to the floor/wall in
accordance with the installation instructions.
Indoor use only.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
As the laser beam used in this Blu-ray Disc/
DVD Home Theatre System is harmful to
eyes, do not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel only.
This appliance is classified as a CLASS 3R
LASER product. Visible and invisible laser
radiation is emitted when the laser protective
housing is opened, so be sure to avoid direct
eye exposure.
This marking is located on the laser protective
housing inside the enclosure.
This appliance is classified as a CLASS 1
LASER product. This marking is located on
the rear exterior.
The nameplate is located on the bottom
exterior.
For the customers in Europe
Disposal of Old
Electrical & Electronic
Equipment (Applicable
in the European Union
and other European
countries with
separate collection
systems)
This symbol on the product or on its
packaging indicates that this product shall not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. The recycling
of materials will help to conserve natural
resources. For more detailed information
about recycling of this product, please contact
your local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
WARNING
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Right
3
GB
BDV-EF1100
4-446-737-11(1)
Disposal of waste
batteries (applicable in
the European Union
and other European
countries with
separate collection
systems)
This symbol on the battery or on the
packaging indicates that the battery provided
with this product shall not be treated as
household waste.
On certain batteries this symbol might be used
in combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment
and human health which could otherwise be
caused by inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources.
In case of products that for safety,
performance or data integrity reasons require a
permanent connection with an incorporated
battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-life
to the applicable collection point for the
recycling of electrical and electronic
equipment.
For all other batteries, please view the section
on how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling
of this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Notice for customers: the following
information is only applicable to equipment
sold in countries applying EU directives.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan. Inquiries
related to product compliance based on
European Union legislation shall be addressed
to the authorized representative, Sony
Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any service or
guarantee matters, please refer to the
addresses provided in the separate service or
guarantee documents.
Hereby, Sony Corp., declares that this
equipment is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
Precautions
This equipment has been tested and found to
comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 meters. (Europe models only)
On power sources
• The unit is not disconnected from the mains
as long as it is connected to the AC outlet,
even if the unit itself has been turned off.
As the main plug is used to disconnect the
unit from the mains, connect the unit to an
easily accessible AC outlet. Should you
notice an abnormality in the unit, disconnect
the main plug from the AC outlet
immediately.
Europe Only
4
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Left
On watching 3D video
images
Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while
watching 3D video images. Sony recommends
that all viewers take regular breaks while
watching 3D video images. The length and
frequency of necessary breaks will vary from
person to person. You must decide what works
best. If you experience any discomfort, you
should stop watching the 3D video images
until the discomfort ends; consult a doctor if
you believe necessary. You should also
review (i) the instruction manual and/or the
caution message of any other device used
with, or Blu-ray Disc contents played with this
product and (ii) our website
(http://esupport.sony.com/) for the latest
information. The vision of young children
(especially those under six years old) is still
under development. Consult your doctor (such
as a pediatrician or eye doctor) before
allowing young children to watch 3D video
images.
Adults should supervise young children to
ensure they follow the recommendations
listed above.
Copy Protection
• Please be advised of the advanced content
protection systems used in both Blu-ray Disc
and DVD media. These systems, called
AACS (Advanced Access Content System)
and CSS (Content Scramble System), may
contain some restrictions on playback,
analog output, and other similar features.
The operation of this product and the
restrictions placed may vary depending on
the date of purchase, as the governing board
of the AACS may adopt or change its
restriction rules after the time of purchase.
• Cinavia Notice
This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message
will be displayed and playback or copying
will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at
http://www.cinavia.com. To request
additional information about Cinavia by
mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA,
92138, USA.
Copyrights and Trademarks
• This system incorporates with Dolby*
Digital and the DTS** Digital Surround
System.
* Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
** Manufactured under license under
U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide
patents issued & pending. DTS-HD,
the Symbol, & DTS-HD and the
Symbol together are registered
trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All
Rights Reserved.
• This system incorporates High-Definition
Multimedia Interface (HDMI
TM
)
technology.
The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
• Java is a trademark of Oracle and/or its
affiliates.
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Right
5
GB
BDV-EF1100
4-446-737-11(1)
• “DVD logo” is a trademark of DVD Format/
Logo Licensing Corporation.
• “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”,
“BD-LIVE”, “BONUSVIEW”, and logos
are trademarks of the Blu-ray Disc
Association.
• “Blu-ray Disc”, “DVD+RW”, “DVD-RW”,
“DVD+R”, “DVD-R”, “DVD VIDEO”, and
“CD” logos are trademarks.
• “BRAVIA” is a trademark of Sony
Corporation.
• “AVCHD 3D/Progressive” and the
“AVCHD 3D/Progressive” logo are
trademarks of Panasonic Corporation and
Sony Corporation.
, “XMB”, and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
• “PlayStation” is a registered trademark of
Sony Computer Entertainment Inc.
• “Sony Entertainment Network logo” and
“Sony Entertainment Network” are
trademarks of Sony Corporation.
• Music and video recognition technology and
related data are provided by Gracenote
®
.
Gracenote is the industry standard in music
recognition technology and related content
delivery. For more information, please visit
www.gracenote.com.
CD, DVD, Blu-ray Disc, and music and
video-related data from Gracenote, Inc.,
copyright © 2000-present Gracenote.
Gracenote Software, copyright © 2000-
present Gracenote. One or more patents
owned by Gracenote apply to this product
and service. See the Gracenote website for a
nonexhaustive list of applicable Gracenote
patents. Gracenote, CDDB, MusicID,
MediaVOCS, the Gracenote logo and
logotype, and the “Powered by Gracenote”
logo are either a registered trademark or a
trademark of Gracenote, Inc. in the United
States and/or other countries.
•Wi-Fi
®
, Wi-Fi Protected Access
®
and Wi-Fi
Alliance
®
are registered marks of the Wi-Fi
Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™
and Wi-Fi Protected Setup™ are marks of
the Wi-Fi Alliance.
• The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
• Android is a trademark of Google Inc.
•The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
• This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as
copyright and trade secret protection for
certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation.
All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
6
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Left
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product is protected by certain
intellectual property rights of Microsoft
Corporation. Use or distribution of such
technology outside of this product is
prohibited without a license from Microsoft
or an authorized Microsoft subsidiary.
Content owners use Microsoft
®
PlayReady™ content access technology to
protect their intellectual property, including
copyrighted content. This device uses
PlayReady technology to access PlayReady-
protected content and/or WMDRM-
protected content. If the device fails to
properly enforce restrictions on content
usage, content owners may require
Microsoft to revoke the device’s ability to
consume PlayReady-protected content.
Revocation should not affect unprotected
content or content protected by other content
access technologies. Content owners may
require you to upgrade PlayReady to access
their content. If you decline an upgrade, you
will not be able to access content that
requires the upgrade.
• DLNA™, the DLNA Logo and DLNA
CERTIFIED™ are trademarks, service
marks, or certification marks of the Digital
Living Network Alliance.
•Opera
®
Devices SDK from Opera Software
ASA. Copyright 1995-2013 Opera Software
ASA. All rights reserved.
• All other trademarks are trademarks of their
respective owners.
• Other system and product names are
generally trademarks or registered
trademarks of the manufacturers. ™ and ®
marks are not indicated in this document.
End User License
Information
Gracenote
®
End User License
Agreement
This application or device contains software
from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote
(the “Gracenote Software”) enables this
application to perform disc and/or file
identification and obtain music-related
information, including name, artist, track, and
title information (“Gracenote Data”) from
online servers or embedded databases
(collectively, “Gracenote Servers”) and to
perform other functions. You may use
Gracenote Data only by means of the intended
End-User functions of this application or
device.
You agree that you will use Gracenote Data,
the Gracenote Software, and Gracenote
Servers for your own personal non-
commercial use only. You agree not to assign,
copy, transfer or transmit the Gracenote
Software or any Gracenote Data to any third
party. YOU AGREE NOT TO USE OR
EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR
GRACENOTE SERVERS, EXCEPT AS
EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to
use the Gracenote Data, the Gracenote
Software, and Gracenote Servers will
terminate if you violate these restrictions. If
your license terminates, you agree to cease
any and all use of the Gracenote Data, the
Gracenote Software, and Gracenote Servers.
Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the
Gracenote Servers, including all ownership
rights. Under no circumstances will Gracenote
become liable for any payment to you for any
information that you provide. You agree that
Gracenote, Inc. may enforce its rights under
this Agreement against you directly in its own
name.
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\020REG.fm
masterpage: Right
7
GB
BDV-EF1100
4-446-737-11(1)
The Gracenote service uses a unique identifier
to track queries for statistical purposes. The
purpose of a randomly assigned numeric
identifier is to allow the Gracenote service to
count queries without knowing anything about
who you are. For more information, see the
web page for the Gracenote Privacy Policy for
the Gracenote service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or
warranties, express or implied, regarding the
accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the
right to delete data from the Gracenote Servers
or to change data categories for any cause that
Gracenote deems sufficient. No warranty is
made that the Gracenote Software or
Gracenote Servers are error-free or that
functioning of Gracenote Software or
Gracenote Servers will be uninterrupted.
Gracenote is not obligated to provide you with
new enhanced or additional data types or
categories that Gracenote may provide in the
future and is free to discontinue its services at
any time.
GRACENOTE DISCLAIMS ALL
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE
DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR
USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO
CASE WILL GRACENOTE BE LIABLE
FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OR FOR ANY
LOST PROFITS OR LOST REVENUES.
© Gracenote, Inc. 2009
About These Operating
Instructions
• The instructions in these Operating
Instructions describe the controls on the
remote control. You can also use the controls
on the unit if they have the same or similar
names as those on the remote control.
In this manual, “disc” is used as a general
reference for BDs, DVDs, or CDs unless
otherwise specified by the text or
illustrations.
• Some illustrations are presented as
conceptual drawings, and may be different
from the actual products.
• The items displayed on the TV screen may
vary depending on the area.
• The default setting is underlined.
8
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\010COVTOC.fm
masterpage: Left
Table of Contents
About These Operating Instructions .... 7
Unpacking ............................................ 9
Guide to Parts and Controls ............... 10
Getting Started
Step 1: Installing the
Speakers .............................. 14
Step 2: Connecting the
System ................................. 15
Connecting the speakers ....... 15
Connecting the TV .................. 16
Connecting the other
equipment
(Set-top box, etc.) ............... 16
Connecting the antenna
(aerial) ................................. 18
Step 3: Preparing for Network
Connection .......................... 18
Step 4: Performing the Easy
Setup .................................... 20
Step 5: Selecting the Playback
Source .................................. 21
Step 6: Enjoying Surround
Sound ................................... 21
Playback
Playing a Disc .................................... 23
Playing from a USB Device ............... 25
Enjoying music from a Bluetooth
device .......................................... 25
Connecting to a smartphone by
One-touch listening function
(NFC) .......................................... 27
Playing via a Network ........................ 29
Available Options .............................. 32
Sound Adjustment
Selecting the Audio Format,
Multilingual Tracks, or
Channel ....................................... 34
Enjoying Multiplex Broadcast
Sound .......................................... 35
Tuner
Listening to the Radio ........................ 35
Receiving Radio Data System
(RDS) .......................................... 37
Other Operations
Using the Control for HDMI Function
for “BRAVIA” Sync ................... 37
Setting the Speakers ........................... 38
Using the Sleep Timer ........................ 39
Deactivating the Buttons on the
Unit ............................................. 40
Controlling Your TV with the
Supplied Remote Control ............ 40
Saving Power in Standby Mode ......... 40
Browsing Websites ............................ 41
Settings and
Adjustments
Using the Setup Display ..................... 43
[Network Update] .............................. 43
[Screen Settings] ................................ 44
[Audio Settings] ................................. 45
[BD/DVD Viewing Settings] ............. 46
[Parental Control Settings] ................. 47
[System Settings] ............................... 47
[Network Settings] ............................. 48
[Easy Network Settings] .................... 49
[Resetting] .......................................... 49
Additional Information
Precautions ......................................... 50
Notes about Discs ............................... 52
Troubleshooting ................................. 53
Playable Discs .................................... 58
Playable Types of Files ...................... 59
Supported Audio Formats .................. 60
Specifications ..................................... 61
Language Code List ........................... 63
Index ................................................... 65
9
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\030UNP.fm
masterpage: Right
Unpacking
Quick Setup Guide
Reference Guide
Remote control (1)
R6 (size AA) batteries (2)
FM wire antenna (aerial) (1)
Front speakers (2)
Subwoofer (1)
10
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\030UNP.fm
masterpage: Left
Guide to Parts and Controls
For more information, refer to the pages indicated in parentheses.
A "/1 (on/standby)
Turns on the unit, or sets it to standby
mode.
B Disc tray (page 23)
C (N-Mark) (page 28)
Position the NFC-compatible device
near this indication to activate the NFC
function.
D Play operation buttons
Z (open/close)
N
a) b)
(play)
x
b)
(stop)
VOL +/–
a)
./> (previous/next)
FUNCTION (page 21)
Selects the playback source.
a)
N and VOL + buttons have a tactile dot.
Use the tactile dot as a reference when
operating the unit.
b)
Hold down N on the unit for more than
2 seconds, the built-in sound
demonstration will be played back on the
system. Press x to stop the demonstration.
During the demonstration, the volume
level may be higher than the volume level
you have set.
E (USB) port (page 25)
F (remote control sensor)
G Front panel display
H LED indicator
White: Lights up when the unit is
turned on.
Blue (for Bluetooth status):
System is ready for pairing: Flashes
quickly
During pairing: Flashes quickly
During connection: Flashes
Connection is established: Lights up
Front panel
Note
11
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\030UNP.fm
masterpage: Right
A Lights up when stereo sound is
received. (Radio only)
B Lights up when repeat play is
activated.
C Lights up when the system is
playing via the PARTY
STREAMING function.
D Lights up when muting is on.
E Lights up when the HDMI (OUT)
jack is correctly connected to an
HDCP (High-bandwidth Digital
Content Protection) compliant
equipment with HDMI or DVI
(Digital Visual Interface) input.
F Displays the system’s status,
such as radio frequency, etc.
When you press DISPLAY, the stream
information/decoding status is
displayed when the function is set to
“TV”.
The stream information/decoding
status may not appear depending on
the stream or item being decoded.
When the [Main Unit illumination] is set to
[Auto] in [System Settings], the front panel
display lights off if you do not operate the unit for
about 10 seconds.
A SPEAKERS jacks (page 15)
B TV (DIGITAL IN OPTICAL) jack
(page 16)
C LAN (100) terminal (page 18)
D HDMI (OUT) jack (page 16)
E AUDIO IN (L/R) jacks (page 17)
F ANTENNA (FM) terminal
(page 18)
Indicators in the front panel display
Note
Rear panel
SPEAKERS
FRONT R FRONT L
SUBWOOFER
12
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\030UNP.fm
masterpage: Left
Number 5, AUDIO,
2 +, and N buttons
have a tactile dot. Use the tactile dot as a
reference when operating the remote
control.
: For TV operations
(For details, see “Controlling Your TV
with the Supplied Remote Control”
(page 40).)
A Z (open/close)
Opens or closes the disc tray.
SPEAKERS TVyAUDIO
Selects whether TV sound is output
from the system’s speakers or the TV’s
speaker(s). This function works only
when you set [Control for HDMI] to
[On] (page 47).
TV "/1 (on/standby) (page 40)
Turns on the TV or sets it to standby
mode.
"/1 (on/standby) (pages 20, 36)
Turns on the system or sets it to
standby mode.
B Number buttons (pages 36, 40)
Enters the title/chapter numbers, preset
station number, etc.
AUDIO (page 34)
Selects the audio format/track.
SUBTITLE
Selects the subtitle language when
multilingual subtitles are recorded on a
BD-ROM/DVD VIDEO.
C Color buttons
Short cut keys for selecting items on
some BD menus (can also be used for
Java interactive operations on BDs).
D TOP MENU
Opens or closes the BD’s or DVD’s
Top Menu.
POP UP/MENU
Opens or closes the BD-ROM’s Pop-
up Menu, or the DVD’s menu.
OPTIONS (pages 22, 32, 42)
Displays the options menu on the TV
screen or in the front panel display.
(The location differs depending on the
selected function.)
RETURN
Returns to the previous display.
B/V/v/b
Moves the highlight to a displayed
item.
(enter)
Enters the selected item.
Remote control
13
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\030UNP.fm
masterpage: Right
E SOUND MODE +/– (page 21)
Selects the sound mode.
HOME (pages 20, 38, 43)
Enters or exits the system’s home
menu.
MUSIC EQ
Selects the pre-programmed equalizer
when listening to music.
SEN
Accesses the “Sony Entertainment
Network™” online service.
F Playback operation buttons
See “Playback” (page 23).
./> (previous/next)
Selects the previous/next chapter,
track, or file.
m/M (fast/slow/freeze frame)
Fast reverse/fast forward during
playback. Each time you press the
button, the search speed changes.
Activates slow-motion play when
pressed for more than one second in
pause mode.
Plays one frame at a time when pressed
in pause mode.
During Blu-ray 3D Disc playback, slow-
motion reverse play and single-frame
reverse play are not available.
N (play)
Starts or re-starts playback (resume
play).
Activates One-Touch Play (page 37)
when the system is on and set to the
“BD/DVD” function.
X (pause)
Pauses or re-starts playback.
x (stop)
Stops playback and remembers the
stop point (resume point). The resume
point for a title/track is the last point
you played or the last photo for a photo
folder.
Stops the built-in sound
demonstration.
Radio operation buttons
See “Tuner” (page 35).
PRESET +/–
TUNING +/–
G (muting)
Turns off the sound temporarily.
2 (volume) +/–
Adjusts the volume.
TV
2 (volume) +/–
Adjusts the TV volume.
TV t (TV input)
Switches the TV’s input source
between the TV and other input
sources.
H DISPLAY (pages 24, 29, 36, 41)
Displays playback and web browsing
information on the TV screen.
Displays the preset radio station,
frequency, etc., in the front panel
display.
I FOOTBALL
Produces optimized sound for
watching football match broadcasting.
J BLUETOOTH
Selects the “BT” function.
When the blue LED indicator lights off
during “BT” function, press to start
pairing or connect to paired Bluetooth
device.
FUNCTION (page 21)
Selects the playback source.
K SLEEP (page 39)
Sets the sleep timer.
Note
14
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Left
Getting Started
Step 1: Installing the
Speakers
Install the speakers by referring to the
illustration below.
A Front left speaker (L)
B Front right speaker (R)
C Subwoofer
D TV
Since the system is equipped with S-Force
PRO Front Surround* technology, you can
enjoy surround sound with the speakers in
front of the listening position.
* S-Force PRO Front Surround 3D reproduces a
convincing sense of distance and space,
resulting in a true surround sound experience
without the need for surround speakers.
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall
down.
1 Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker. See
the illustrations below.
2 Fasten the screws to the wall.
The screws should protrude
5 mm to 7 mm.
3 Hang the speaker on the screw.
Getting Started
Note
A BDC
Installing the speakers
on a wall
4 mm
30 mm
5 mm
Hole on the back of the speaker
5 mm to
7 mm
15
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Right
Getting Started
Contact a screw shop or installer regarding the
wall material or screws to be used.
Use screws that are suitable for the wall
material and strength. As a plaster board wall is
especially fragile, attach the screws securely to
a beam and fasten them to the wall. Install the
speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient
wall strength or improper screw installation,
natural calamity, etc.
Step 2: Connecting the
System
Do not connect the AC power cord (mains
lead) of the unit to a wall outlet (mains)
until all the other connections are made.
When you connect other equipment with a
volume control, turn down the volume of the
equipment to a level where sound is not distorted.
Connect the speaker cords to match the
color of the SPEAKERS jacks of the unit.
When connecting to the unit, insert the
connector until it clicks.
Note
Note
Connecting the
speakers
SPEAKERS
FRONT R FRONT L
SUBWOOFER
FRONT R FRONT L
SUBWOOFER
Purple
(Subwoofer)
White
(Front left
speaker (L))
Red
(Front right
speaker (R))
16
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Left
Getting Started
Select one of the following connection methods according to the input jacks on your TV.
Video connection
1)
High Speed HDMI cable
2)
If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, digital
audio signal can be output from the TV via an HDMI cable connection. For setting the ARC function,
see [Audio Return Channel] (page 48).
Audio connections
If you do not connect the system to the TV’s HDMI jack that is compatible with the ARC
function, make an appropriate audio connection for listening to TV sound via the system’s
speakers.
Connecting the TV
A
SPEAKERS
FRONT R FRONT L
SUBWOOFER
A
B C
HDMI cable
1)
(not supplied)
or
2)
B High quality
Standard
quality
C
Optical digital cord
(not supplied)
OPTICAL
DIGITAL OUT
L
R
AUDIO
OUTPUT
Audio cable (not supplied)
17
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Right
Getting Started
Connect the system so that video signals from the system and other equipment are output
to the TV, and audio signals from the equipment are output to the system as follows.
Select one of the following connection methods according to the jack type of the equipment.
If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]
to [Off] (page 47).
• You can enjoy equipment sound by selecting the “AUDIO” function for connection B.
Connecting the other equipment (Set-top box, etc.)
A High quality
Standard
quality
B
Note
System
Signal flow
TV
: Audio signal
: Video signal
Equipment
(Set-top box, VCR, PlayStation
®
, or
digital satellite receiver, etc.)
Video out
Audio out
SPEAKERS
FRONT R FRONT L
SUBWOOFER
A B
Optical digital cord
(not supplied)
OPTICAL
DIGITAL OUT
L
R
AUDIO
OUTPUT
Audio cable (not supplied)
18
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Left
Getting Started
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
Step 3: Preparing for
Network Connection
To connect the system to your network, perform
[Easy Network Settings]. For details, see “Step 4:
Performing the Easy Setup” (page 20).
Select the method based on your LAN
(Local Area Network) environment.
If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.
If you use other than a wireless LAN
Use a LAN cable to connect to the LAN
(100) terminal on the unit.
A shielded interface cable (LAN cable), straight
or crossover, is recommended.
Connecting the antenna
(aerial)
Note
FM wire antenna (aerial)
(supplied)
Tip
Tip
Broadband router
LAN cable (not supplied)
19
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Right
Getting Started
Before performing the
network settings
When your wireless LAN router (access
point) is Wi-Fi Protected Setup (WPS)-
compatible, you can easily set the network
settings with the WPS button.
If not, check the following information in
advance, and record it in the space provided
below.
The network name (SSID*) that
identifies your network**.
If security is set on your wireless
network, the security key (WEP key,
WPA key)**.
* SSID (Service Set Identifier) is a name that
identifies a particular wireless network.
** You need to check the settings of your wireless
LAN router to get the information about SSID
and security key. For details:
visit the following website:
http://support.sony-europe.com/
refer to the operating instructions supplied
with the wireless LAN router
consult the manufacturer of the wireless
LAN router
About wireless LAN
security
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this system supports
various security functions. Be sure to
correctly configure the security settings in
accordance with your network
environment.
x No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your
wireless network, even without any
sophisticated tools. Keep in mind that there
is a risk of unauthorized access or
interception of data.
x WEP
WEP applies security to communications
to prevent outsiders from intercepting
communications or intruding into your
wireless network. WEP is a legacy security
technology that enables older devices
which do not support TKIP/AES to be
connected.
x WPA-PSK (TKIP), WPA2-PSK
(TKIP)
TKIP is a security technology developed in
response to the deficiencies of WEP. TKIP
assures a higher security level than WEP.
x WPA-PSK (AES), WPA2-PSK
(AES)
AES is a security technology that uses an
advanced security method distinct from
WEP and TKIP. AES assures a higher
security level than WEP or TKIP.
20
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Left
Getting Started
Step 4: Performing the
Easy Setup
Before performing Step 4
Make sure all connections are secure, and
then connect the AC power cord (mains
lead).
Follow the Steps below to make the basic
adjustments and network settings for the
system.
Displayed items vary depending on the
area.
1 Insert two R6 (size AA) batteries
(supplied) by matching the 3
and # ends on the batteries to
the markings inside the
compartment.
2 Turn on the TV.
3 Press [/1.
4 Switch the input selector on
your TV so that the signal from
the system appears on the TV
screen.
The [Easy Initial Settings] for OSD
language selection appears.
5 Perform [Easy Initial Settings].
Follow the on-screen
instructions to make the basic
settings using B/V/v/b and .
6 After completing the [Easy Initial
Settings], press V/v to select
[Easy Network Settings], then
press .
The [Easy Network Settings] display
appears.
7 Follow the on-screen
instructions to make the network
settings using B/V/v/b and .
If the system cannot connect to the
network, see “Network connection”
(page 57) or “Wireless LAN
connection” (page 57).
To recall the [Easy Network
Settings] display
1 Press HOME.
The home menu appears on the TV
screen.
2 Press B/b to select [Setup].
3 Press V/v to select [Easy Network
Settings], then press .
B/V/v/b
21
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Right
Getting Started
Step 5: Selecting the
Playback Source
Press FUNCTION repeatedly until
the function you want appears in the
front panel display.
When you press FUNCTION once, the
current function appears in the front panel
display, then each time you press
FUNCTION, the function changes
cyclically as follows.
“BD/DVD” t “USB” t “FM” t
“TV” t “BT” t “AUDIO”
• Some functions may be changed via the TV
screen by pressing FUNCTION, V/v, and .
• You can also press BLUETOOTH on the
remote control to select “BT” function.
Step 6: Enjoying
Surround Sound
After performing the previous Steps and
starting playback, you can easily enjoy pre-
programmed sound modes that are tailored
to different kinds of sound sources. They
bring the exciting and powerful sound of
movie theaters into your home.
Press SOUND MODE +/– repeatedly
during playback until the mode you
want appears in the front panel
display or on the TV screen.
Function and playback source
“BD/DVD”
Disc or network device to be played by the
system
“USB”
USB device that is connected to the (USB)
port (page 10)
“FM”
FM radio (page 35)
“TV”
Equipment (TV, etc.) that is connected to the
TV (DIGITAL IN OPTICAL) jack, or a TV
compatible with the Audio Return Channel
function that is connected to the HDMI
(OUT) jack (page 16)
“BT”
Audio contents of a Bluetooth device
“AUDIO”
Equipment that is connected to the AUDIO
IN (L/R) jacks (page 17)
Tip
Selecting the sound
mode
Auto
The system automatically selects [Movie] or
[Music] to produce the sound effect
depending on the disc or sound stream.
• 2-channel source: Outputs 2-channel sound
as it is.
• Multi-channel source: Simulates 7.1 or 5.1
surround sound with two front speakers and
a subwoofer.
Movie
The system provides the optimized sound for
watching movies.
Music
The system provides the optimized sound for
listening to music.
Digital Music Enhancer
[Digital Music]
The system reproduces an enhanced sound
for compressed audio.
Demo Sound
The system provides ear-catching sound,
suitable for demonstration.
22
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\040GET.fm
masterpage: Left
Getting Started
To select the sound mode
from the option menu
1 Press OPTIONS and V/v to select
[Sound Mode], then press .
2 Press V/v to select the sound mode,
then press .
To select the pre-
programmed music
equalizer
Press MUSIC EQ repeatedly during
playback.
You can select the sound to suit your
preference.
Each time you press the button, the setting
changes cyclically as follows.
[Standard] t [Rock] t [Hiphop] t
[Electronica]
You can also select the music equalizer by
using the option menu in [Music] sound
mode.
The sound mode can be selected only when
[Sound Effect] is set to [Sound Mode On]
(page 46). When [Sound Effect] is set to other
than [Sound Mode On], the sound mode setting
does not apply.
Press FOOTBALL during playback.
[Football] appears on the TV screen.
You can experience a feeling of presence in
the stadium when watching a football
match broadcasting.
To turn off the football mode, press
FOOTBALL again to select [Football Off].
The sound mode is changed to the last
selected sound mode.
Depending on the source, the football mode may
not work well.
• The football mode will be turned off when you
turn off the system.
You can also select the football mode from the
option menu.
Note
Selecting the football
mode
Note
Tip
23
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
Playing a Disc
For playable discs, see “Playable Discs”
(page 58).
1 Switch the input selector on
your TV so that the signal from
the system appears on your TV
screen.
2 Press Z, and place a disc on the
disc tray.
3 Press Z to close the disc tray.
Playback starts.
If playback does not start
automatically, select in the
[Video], [Music], or
[Photo] category, and press .
Some BD-ROMs with “BD-LIVE Logo*”
have bonus content and other data that can
be downloaded for enjoyment.
*
1 Connect the USB device to the
(USB) port (page 25).
For local storage, use a 1 GB or larger
USB memory.
2 Prepare for BD-LIVE (BD-LIVE
only).
Connect the system to a network
(page 18).
Set [BD Internet Connection] to
[Allow] (page 47).
3 Insert a BD-ROM with
BONUSVIEW/BD-LIVE.
The operation method differs
depending on the disc. Refer to the
operating instructions of the disc.
To delete data in the USB memory, select [Delete
BD Data] in [Video], and press . All data
stored in the buda folder will be deleted.
Playback
Enjoying BONUSVIEW/
BD-LIVE
Tip
24
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Left
You can enjoy Blu-ray 3D Discs with the
3D logo*.
*
1 Prepare for Blu-ray 3D Disc
playback.
Connect the system to your
3D-compatible TV using a High
Speed HDMI cable (page 16).
Set [3D Output Setting] and [TV
Screen Size Setting for 3D] in
[Screen Settings] (page 44).
2 Insert a Blu-ray 3D Disc.
The operation method differs
depending on the disc. Refer to the
operating instructions supplied with
the disc.
Refer also to the operating instructions of your
3D-compatible TV.
You can check the playback information,
etc., by pressing DISPLAY.
The displayed information differs
depending on the disc type and system
status.
Example: when playing a BD-ROM
A Output resolution/Video frequency
B Title number or name
C The currently selected audio setting
D Available functions ( angle,
audio, subtitle)
E Playback information
Displays play mode, playing status
bar, disc type, video codec, bit rate,
repeat type, elapsed time, total playing
time
F Chapter number
G The currently selected angle
Enjoying Blu-ray 3D
Tip
Displaying the playback
information
25
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
Playing from a USB
Device
You can play video/music/photo files on a
connected USB device.
For playable types of files, see “Playable
Types of Files” (page 59).
1 Connect the USB device to the
(USB) port.
Refer to the operating instructions of
the USB device before connecting.
2 Press HOME.
The home menu appears on the TV
screen.
3 Press B/b to select [Video],
[Music], or [Photo].
4 Press V/v to select [USB
device], then press .
Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the system
off before connecting or removing the USB
device.
Enjoying music from a
Bluetooth device
Bluetooth wireless technology is a short-
range wireless technology that enables
wireless data communication between
digital devices. Bluetooth wireless
technology operates within a range of about
10 meters.
You do not need wires to get connected as
you do with a USB connection, and you do
not need to place the devices face to face as
you do with wireless infrared technology.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. These companies produce
products that meet the global standard.
Supported Bluetooth
version and profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. This system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Specification version 3.0
Supported Bluetooth profiles:
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote Control
Profile)
Note
About the Bluetooth
wireless technology
26
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Left
• To be able to use the Bluetooth function, the
Bluetooth device to be connected must support
the same profile as this system. Even if the
device supports the same profile, the functions
may differ depending on the specifications of
the Bluetooth device.
• The audio playback on this system may be
delayed from that on the Bluetooth device
because of the characteristics of the Bluetooth
wireless technology.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be performed
again.
1 Place the Bluetooth device
within 1 meter from the unit.
2 Press BLUETOOTH.
You can also select [Bluetooth
AUDIO] from [Input] in home
menu.
3 Set the Bluetooth device in
pairing mode.
For details on setting the Bluetooth
device in pairing mode, refer to the
operating instructions supplied with
the device.
4 Select “BLU-RAY HOME
THEATRE SYSTEM” on the
Bluetooth device display.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
If passkey is required on the Bluetooth
device, enter “0000”. Passkey may be called
“Passcode”, “PIN code”, “PIN number” or
“Password”.
5 Once pairing is completed, the
device is automatically
connected to the system.
Device name appears on the TV
screen.
You can pair up to 9 Bluetooth devices. If
the 10th Bluet ooth device is paired, the least
recently connected device will be replaced
by the new one.
6 Start playback on the Bluetooth
device.
7 Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
unit.
To cancel pairing operation
Press HOME or FUNCTION.
You can connect to a Bluetooth device
from this unit.
Check the following before playing music:
–The Bluetooth function of the Bluetooth
device is turned on.
The pairing has been completed
(page 26).
1 Press BLUETOOTH.
To connect to the most recent connected
Bluetooth device, press N. Then proceed to
Step 5.
2 Press OPTIONS.
Note
Pairing this system with
a Bluetooth device
Note
Note
Connecting to a
Bluetooth device from
this system
Note
27
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
3 Press V/v repeatedly to select
[Device List], then press .
A list of paired Bluetooth devices
appears.
4 Press V/v repeatedly to select
the device you want, then press
.
5 Press N to start playback.
6 Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
unit.
Once the unit and the Bluetooth device are
connected, you can control playback by pressing
N, X, x, m/M and ./>.
To disconnect the
Bluetooth device
Press HOME, FUNCTION or RETURN.
To delete a paired Bluetooth
device from the device list
1 Follow Steps 1 to 3 above.
2 Press V/v repeatedly to select the
device, then press OPTIONS.
3 Press V/v repeatedly to select
[Remove], then press .
4 Follow the on-screen instructions to
delete the device using B/V/v/b and
.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another Bluet ooth
device.
Connecting to a
smartphone by One-
touch listening function
(NFC)
By holding an NFC-compatible
smartphone near to the on the unit, the
unit and smartphone proceed to complete
pairing and the Bluetooth connection
automatically.
What is “NFC”?
NFC (Near Field Communication) is a
technology enabling short-range wireless
communication between various devices,
such as mobile phones and IC tags. Thanks
to the NFC function, data communication
can be achieved easily just by holding the
device near the on the NFC-compatible
devices.
1 Download and install the app
“NFC Easy Connect”.
“NFC Easy Connect” is a free app for
Android smartphones that can be
obtained on Google Play. Search for
the app using the keyword “NFC Easy
Connect” on the site, or access the
download site directly by reading the
two-dimensional code below.
Note that “NFC Easy Connect” is free
but data communication fees when
downloading are charged separately.
Note
Note
Compatible smartphones
Smartphones with a built-in NFC function
(OS: Android 2.3.3 – 4.0.x, excluding
Android 3.x)
28
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Left
Two-dimensional code* for
direct access
* Use a two-dimensional code reader app.
The app may not be available in some
countries/regions.
2 Start the “NFC Easy Connect”
app on the smartphone.
Make sure that the application screen
is displayed.
3 Hold the smartphone near to the
on the unit until the
smartphone vibrates.
Vibration cue is provided when the
smartphone is recognized by the unit.
After being recognized by the unit,
follow the on-screen instructions
displayed on the smartphone, and
complete the procedure for Bluetooth
connection.
When the Bluetooth connection is
established, the blue LED indicator on
the front panel stops flashing. The
playback time appears in the front
panel display.
The system only can recognizes and connects to
one NFC-compatible device at a time.
• Depending on your smartphone, you may need
to turn on the NFC function on your smartphone
in advance. For details, refer to the operating
instructions of the smartphone.
If pairing and the Bluetooth connection fail, do
the following.
Relaunch “NFC Easy Connect” and move the
smartphone slowly over the .
Remove the case from the smartphone if using
a commercially available smartphone case.
To listen to music
Start playback of an audio source on the
smartphone. For details on playback
operations, refer to the operating
instructions of your smartphone.
If the volume level is low, adjust the volume of
the smartphone first. If the volume level is still
too low, adjust the volume level on the unit.
To stop playback
The playback will be stopped when you
perform any of the following items:
Hold the smartphone near to the on
the unit again.
Stop the music player of the smartphone.
Turn off the unit or the smartphone.
Change the function.
Disable the Bluetooth function on the
smartphone.
Note
Note
Tip
Tip
29
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
Playing via a Network
Sony Entertainment Network serves as a
gateway delivering selected Internet
content and a variety of on-demand
entertainment straight to your unit.
Some Internet content requires registration via a
PC before it can be played. For further details,
visit the following website:
http://support.sony-europe.com/
• Some Internet content may not be available in
some countries/regions.
1 Prepare for Sony Entertainment
Network.
Connect the system to a network
(page 18).
2 Press SEN.
3 Press B/V/v/b to select the
Internet content and a variety of
on-demand entertainment, then
press .
Video streaming control
panel
The control panel appears when a video file
starts playing. The displayed items may
differ depending on the Internet content
provider.
To display again, press DISPLAY.
A Control display
Press B/V/v/b or for playback
operations.
B Playing status bar
Status bar, cursor indicating the
current position, playing time, duration
of the video file
C Network condition indicator
Indicates signal strength for a
wireless connection.
Indicates a wired connection.
D Network transmission speed
E The next video file name
F The currently selected video file name
Enjoying Sony
Entertainment Network
(SEN)
Tip
30
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Left
You can play video/music/photo files on
other DLNA-certified equipment by
connecting them to your home network.
This unit can be used as a player and
renderer.
Server: Stores and shares digital media
contents
Player: Finds and plays digital media
content from the DMS
Renderer: Receives and plays files from
the server, and can be operated by another
equipment (controller)
Controller: Operates the renderer
equipment
Prepare for using the DLNA
function.
Connect the system to a network
(page 18).
Prepare other DLNA-certified
equipment. For details, refer to the
operating instructions of the equipment.
To play files stored on a
DLNA server via the system
(DLNA Player)
Select the DLNA server icon from
[Video], [Music], or [Photo] in
the home menu, then select the file that you
want to play.
To play remote files by
operating the system
(Renderer) via a DLNA
controller
You can operate the system with a
DLNA-certified controller (a mobile
phone, etc), when playing files stored on a
DLNA server.
For details on operation, refer to the
operating instructions of the DLNA
controller.
Do not operate the system with the supplied
remote control and a DLNA controller at the same
time.
The system is compatible with the “Play To”
function of Windows Media
®
Player 12 that
comes standard with Windows 7.
Playing files on a Home
Network (DLNA)
Player
Player
(This system)
Server
Note
Tip
Player
(This system)
Server
Controller
Renderer
(This system)
Server
31
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
You can play the same music at the same
time on all Sony equipment which are
compatible with the PARTY
STREAMING function and connected to
your home network.
Contents in [Music] and the “FM”,
“BT” and “AUDIO” functions can be used
with the PARTY STREAMING function.
There are two kinds of PARTY
STREAMING-compatible equipment.
PARTY host: Plays and sends music.
PARTY guest: Plays music that is
received from PARTY host.
This unit can be used as a PARTY host or
PARTY guest.
Prepare for PARTY STREAMING.
Connect the system to a network
(page 18).
Connect equipment which is compatible
with the PARTY STREAMING function.
To use the system as the
PARTY host
Select a track in [Music], a radio station
in [Radio], [AUDIO] or
[Bluetooth AUDIO] in [Input],
press OPTIONS. Then select [Start
PARTY] to start.
To close, press OPTIONS, then select
[Close PARTY].
If content that is not compatible with the PARTY
STREAMING function is played, the system
closes PARTY automatically.
To use the system as a
PARTY guest
Select [PARTY] in [Music], then
select the PARTY host device icon.
To leave the PARTY, press OPTIONS,
then select [Leave PARTY].
To close the PARTY, press OPTIONS,
then select [Close PARTY].
The sale and product lineup of products that are
compatible with the PARTY STREAMING
function differ depending on the area.
You can acquire content information using
Gracenote technology and search for
related information.
1 Connect the system to a network
(page 18).
2 Insert a disc with content about
which you want to search.
You can perform a video search from a
BD-ROM or DVD-ROM, and a music
search from a CD-DA (music CD).
Playing the same music
in different rooms
(PARTY STREAMING)
PARTY guest
PARTY host
(This system)
PARTY guest
Note
Note
Searching for video/
music information
32
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Left
3 Press B/b to select [Video] or
[Music].
4 Press V/v to select [Video
Search] or [Music Search].
The content information (such as title,
cast, track, or artist), [Playback
History] and [Search History] are
displayed.
[Playback History]
Displays a list of previously played
BD-ROM/DVD-ROM/CD-DA
(music CD) titles. Select a title to
acquire content information.
[Search History]
Displays a list of previous searches
performed via the [Video Search] or
[Music Search] function.
To search for further related
information
Select an item in the lists, then select the
service for searches.
TV SideView is a free mobile application
for the remote device (smartphone, etc). By
using the TV SideView with this system,
you can easily enjoy the system by the
operation on your remote device.
You can launch a service or application
directly from the remote device and view
the disc information during the disc
playback. The TV SideView also can be
used as a remote control and software
keyboard.
Before you use the TV SideView device
with this system for the first time, be sure to
register the TV SideView device.
Follow the on-screen instructions on the
TV SideView device for registration.
The registration will be possible only when home
menu appears on the TV screen.
Available Options
Various settings and playback operations
are available by pressing OPTIONS. The
available items differ depending on the
situation.
Common options
Using the TV SideView
Note
[Sound Mode]
Changes the sound mode setting (page 21).
[Football]
Turns on or off the football mode (page 22).
[Repeat Setting]
Sets repeat playback.
[3D Menu]
[Simulated 3D]: Adjusts the simulated 3D
effect.
[3D Depth Adjustment]: Adjusts the depth of
3D images.
[2D Playback]: Sets playback to 2D image.
[Play/Stop]
Starts or stops playback.
[Play from start]
Plays the item from the beginning.
[Start PARTY]
Starts a party with the selected source.
This item may not appear depending on the
source.
[Leave PARTY]
Leaves a party which the system is
participating in. The PARTY STREAMING
function continues among other participating
equipment.
[Close PARTY]
For PARTY host: Closes a party.
For PARTY guest: Closes a party which the
system is participating in. The PARTY
STREAMING function ends for all other
participating equipment.
[Change Category]
Switches among the [Video], [Music]
and [Photo] category in “BD/DVD” (for
disc only) or “USB” function. This item only
available when the display list is available
for the category.
33
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\050PLA.fm
masterpage: Right
Playback
[Video] only [Music] only
[Photo] only
[A/V SYNC]
Adjusts the time gap between picture and
sound (page 34).
[3D Output Setting]
Sets whether or not to output 3D video
automatically.
[Video Settings]
• [Picture Quality Mode]: Selects the picture
settings for different lighting environments.
• [BNR]: Reduces the mosaic-like block
noise in the picture.
• [MNR]: Reduces minor noise around the
picture outlines (mosquito noise).
[Pause]
Pauses playback.
[Top Menu]
Displays the BD’s or DVD’s Top Menu.
[Menu/Popup Menu]
Displays the BD-ROM’s Pop-up Menu or
DVD’s menu.
[Title Search]
Searches for a title on BD-ROMs/DVD
VIDEOs and starts playback from the
beginning.
[Chapter Search]
Searches for a chapter and starts playback
from the beginning.
[Audio]
Selects the audio format/track.
[Subtitle]
Selects the subtitle language when
multilingual subtitles are recorded on
BD-ROMs/DVD VIDEOs.
[Angle]
Switches the viewing angles when multi-
angles are recorded on BD-ROMs/DVD
VIDEOs.
[IP Content Noise Reduction]
Adjusts the video quality for Internet
content.
[Video Search]
Displays information on the BD-ROM/
DVD-ROM based on Gracenote technology.
[Add Slideshow BGM]
Registers music files in the USB memory as
slideshow background music (BGM).
[Music Search]
Displays information on the audio CD
(CD-DA) based on Gracenote technology.
[Slideshow]
Starts a slideshow.
[Slideshow Speed]
Changes the slideshow speed.
[Slideshow Effect]
Sets the effect when playing a slideshow.
[Slideshow BGM]
[Off]: Turns off the function.
• [My Music from USB]: Sets the music files
registered in [Add Slideshow BGM].
• [Play from Music CD]: Sets the tracks on
CD-DAs (music CDs).
[Change Display]
Switches between [Grid View] and [List
View].
[Rotate Left]
Rotates the photo counterclockwise by
90 degrees.
[Rotate Right]
Rotates the photo clockwise by 90 degrees.
[View Image]
Displays the selected picture.
34
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\060SOU.fm
masterpage: Left
(A/V SYNC)
When the sound does not match the
pictures on the TV screen, you can adjust
the delay between the picture and sound for
each function separately.
The setting method differs depending on
the function.
When other than the “BT” or
“TV” function is selected
1 Press OPTIONS.
The option menu appears on the TV
screen.
2 Press V/v to select [A/V SYNC],
then press .
3 Press B/b to adjust the delay,
then press .
You can adjust from 0 ms to 300 ms in
25 ms increments.
When the “TV” function is
selected
1 Press OPTIONS.
“AV.SYNC” appears in the front panel
display.
2 Press or b.
3 Press V/v to adjust the delay,
then press .
You can adjust from 0 ms to 300 ms in
25 ms increments.
4 Press OPTIONS.
The option menu in the front panel
display turns off.
Selecting the Audio
Format, Multilingual
Tracks, or Channel
When the system is playing a BD/DVD
VIDEO recorded in multiple audio formats
(PCM, Dolby Digital, MPEG audio, or
DTS) or multilingual tracks, you can
change the audio format or language.
With a CD, you can select the sound from
the right or left channel and listen to the
sound of the selected channel through both
the right and left speakers.
Press AUDIO repeatedly during
playback to select the audio signal
you want.
The audio information appears on the TV
screen.
x BD/DVD VIDEO
Depending on the BD/DVD VIDEO, the
option of language varies.
When 4 digits are displayed, they represent
a language code. See “Language Code
List” (page 63). When the same language is
displayed two or more times, the BD/DVD
VIDEO is recorded in multiple audio
formats.
x DVD-VR
The types of sound tracks recorded on a
disc are displayed.
Example:
[ Stereo]
[ Stereo (Audio1)]
[ Stereo (Audio2)]
•[ Main]
•[ Sub]
[ Main/Sub]
Adjusting the delay
between the picture and
sound
Sound Adjustment
35
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\070TUN.fm
masterpage: Right
Sound Adjustment/Tuner
[ Stereo (Audio1)] and [ Stereo (Audio2)] do
not appear if only one audio stream is recorded on
the disc.
x CD
•[
Stereo]: The standard stereo sound.
[ 1/L]: The sound of the left channel
(monaural).
[ 2/R]: The sound of the right channel
(monaural).
[ L+R]: The sound of both the left and
right channels output from each
individual speaker.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound
when the system receives or plays a Dolby
Digital multiplex broadcast signal.
To receive a Dolby Digital signal, you need to
connect a TV or other equipment to the TV
(DIGITAL IN OPTICAL) jack with a optical
digital cord (pages 16, 17).
If your TV’s HDMI IN jack is compatible with
the Audio Return Channel function (pages 16,
47), you can receive a Dolby Digital signal via an
HDMI cable.
Press AUDIO repeatedly until the
signal you want appears in the front
panel display.
•“MAIN
: Sound of the main language
will be output.
“SUB”: Sound of the sub language will
be output.
“MN/SUB”: Mixed sound of both the
main and sub languages will be output.
Listening to the Radio
1
Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Select the radio station.
Automatic tuning
Hold down TUNING +/– until the auto
scanning starts.
[Auto Tuning] appears on the TV
screen. Scanning stops when the
system tunes in a station.
To cancel automatic tuning, press any
buttons.
Manual tuning
Press TUNING +/– repeatedly.
3 Press 2 +/– repeatedly to
adjust the volume.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1 Press OPTIONS.
The option menu appears on the TV
screen.
2 Press V/v to select [FM Mode],
then press .
3 Press V/v to select [Monaural],
then press .
[Stereo]: Stereo reception.
[Monaural]: Monaural reception.
You can set [FM Mode] for each preset station
separately.
Note
Note
Tuner
Tip
36
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\070TUN.fm
masterpage: Left
To turn off the radio
Press "/1.
You can preset up to 20 stations. Before
tuning, make sure to turn down the volume
to minimum.
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Hold down TUNING +/– until the
auto scanning starts.
Scanning stops when the system tunes
in a station.
3 Press OPTIONS.
The option menu appears on the TV
screen.
4 Press V/v to select [Preset
Memory], then press .
5 Press V/v to select the preset
number you want, then press .
6 Repeat Steps 2 to 5 to store
other stations.
To change a preset number
Select the preset number you want by
pressing PRESET +/–, then perform the
procedure from Step 3.
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
The last received station is tuned in.
2 Press PRESET +/– repeatedly to
select the preset station.
The preset number and frequency
appear on the TV screen and front
panel display.
Each time you press the button, the
system tunes in one preset station.
• You can select the preset station number
directly by pressing the number buttons.
• Each time you press DISPLAY, the
display in the front panel display changes
as follows:
Frequency y Preset number
Presetting radio
stations
Selecting a preset
station
Tip
37
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Right
Other Operations
Receiving Radio Data
System (RDS)
The Radio Data System (RDS) is a
broadcasting service that allows radio
stations to send additional information
along with the regular program signal. This
system offers convenient RDS features,
such as station name display.
The station name appears on the TV screen.
Simply select a station from the FM
band.
• RDS may not work properly if the station you
are tuned to is not transmitting the RDS signal
properly, or if the signal strength is weak.
Not all FM stations provide RDS service, nor do
they provide the same type of services. If you
are not familiar with the RDS system, check
with your local radio stations for details on RDS
services in your area.
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony equipment that is
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified.
To use the “BRAVIA” Sync function, be sure to
turn on the system and all connected equipment
after completed the HDMI connection.
Control for HDMI - Easy
Setting
You can set the system’s [Control for
HDMI] function automatically by enabling
the corresponding setting on the TV.
For details about the Control for HDMI
function, see “[HDMI Settings]” (page 47)
System Power Off
You can turn the system off in sync with the
TV.
The system does not turn off automatically while
playing music or when “FM” function is selected.
One-Touch Play
When you press N on the remote control,
the system and TV turn on, and the TV’s
input is switched to the HDMI input which
the system is connected.
Note
Other Operations
Note
Note
38
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Left
System Audio Control
You can enjoy the sound from TV or other
equipment by a simple operation.
You can use the System Audio Control
function as follows:
When the system is turned on, the sound
of the TV or other equipment can be
output from the speakers of the system.
When sound from the TV or other
equipment is output via the speakers of
the system, you can switch the sound to
output from the TV speakers by pressing
SPEAKERS TVyAUDIO.
When sound from the TV or other
equipment is output via the speakers of
the system, you can adjust the volume
and turn off the sound of the system by
operating the TV.
Audio Return Channel
You can enjoy TV sound via the system by
using just one HDMI cable. For details of
the setting, see “[Audio Return Channel]”
(page 48).
Language Follow
When you change the language for the
on-screen display of the TV, the system’s
on-screen display language is also changed
after turning off and on the system.
Setting the Speakers
[Speaker Settings]
To obtain optimum surround sound, set the
speakers’ distance from your listening
position. Then use the test tone to adjust the
balance of the speakers.
1 Press HOME.
The home menu appears on the TV
screen.
2 Press B/b to select [Setup].
3 Press V/v to select [Audio
Settings], then press .
4 Press V/v to select [Speaker
Settings], then press .
The [Speaker Settings] display
appears.
5 Press V/v to select the item, then
press .
6 Press V/v to adjust the
parameter.
7 Press B/b and to confirm the
setting.
Check the following settings.
x [Distance]
Be sure to set the parameters of the distance
from the listening position to the speakers.
You can set the parameters from 0.0 to
7.0 meters.
[Front Left/Right] 3.0 m
: Set the front
speaker distance.
[Subwoofer] 3.0 m
: Set the subwoofer
distance.
39
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Right
Other Operations
x [Level]
You can adjust the sound level of the
speakers. You can set the parameters from
–6.0 dB to +6.0 dB. Be sure to set [Test
Tone] to [On] for easy adjustment.
[Front Left/Right] 0.0 dB
: Set the front
speaker level.
[Subwoofer] 0.0 dB
: Set the subwoofer
level.
x [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]
: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting level.
When you select one of the [Speaker
Settings] items, the test tone is emitted
from each speaker in sequence.
Adjust the sound level as follows.
1 Set [Test Tone] to [On].
2 Press V/v to select [Level], then
press .
3 Press V/v to select the speaker type
you want, then press .
4 Press B/b to select the left or right
speaker, then press V/v to adjust the
level.
5 Press .
6 Repeat Steps 3 to 5.
7 Press RETURN.
The system returns to the previous
display.
8 Press V/v to select [Test Tone], then
press .
9 Press V/v to select [Off], then press
.
The test tone signals are not output from the
HDMI (OUT) jack.
To adjust the volume of all the speakers at one
time, press
2 +/–.
Using the Sleep Timer
You can set the system to turn off at a
preset time, so you can fall asleep listening
to music. The time can be preset in intervals
of 10 minutes.
Press SLEEP.
Each time you press SLEEP, the minutes
display (the remaining time) in the front
panel display changes by 10 minutes.
When you set the sleep timer, the
remaining time appears every 5 minutes.
When the remaining time is less than
2 minutes, “SLEEP” flashes in the front
panel display.
To check the remaining
time
Press SLEEP once.
To change the remaining
time
Press SLEEP repeatedly.
Note
Tip
40
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Left
Deactivating the
Buttons on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing
misoperation, such as child mischief.
Hold down x on the unit for more
than 5 seconds.
“LOCKED” appears in the front panel
display.
The child lock function is activated and the
buttons on the unit are locked. (You can
operate the system by using the remote
control.)
To cancel, hold down x for more than
5 seconds until “UNLOCK” appears in the
front panel display.
If you operate the buttons on the unit while the
child lock function is on, “LOCKED” flashes in
the front panel display.
Controlling Your TV
with the Supplied
Remote Control
By adjusting the remote control signal, you
can control your TV with the supplied
remote control.
When you replace the batteries of the remote
control, the code number may reset to the default
(SONY) setting. Set the appropriate code number
again.
While holding down TV "/1, press
number buttons to enter your TV’s
manufacturer’s code (see the table).
Then release TV "/1.
If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.
If more than one code number is listed, try
entering them one at a time until you find
the code that works with your TV.
Saving Power in
Standby Mode
Check that you have made the following
settings:
[Control for HDMI] in [HDMI Settings]
is set to [Off] (page 47).
[Quick Start Mode] is set to [Off]
(page 48).
[Remote Start] in [Network Settings] is
set to [Off] (page 49).
Note
Note
Preparing the remote
control for controlling
the TV
Manufacturer Code number
SONY 01 (default)
LG 05
PANASONIC 06
PHILIPS 02, 03, 07
SAMSUNG 02, 08
TOSHIBA 04
41
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Right
Other Operations
Browsing Websites
1
Prepare for Internet browsing.
Connect the system to a network
(page 18).
2 Press HOME.
The home menu appears on the TV
screen.
3 Press B/b to select
[Network].
4 Press V/v to select [Internet
Browser], then press .
The [Internet Browser] display
appears.
Some websites may not display correctly, or not
function.
To enter a URL
Select [URL entry] from the options menu.
Enter the URL using the software
keyboard, then select [Enter].
To set the default start page
While the page you want to set is displayed,
select [Set as start page] from the options
menu.
To return to the previous
page
Select [Previous page] from the options
menu.
When the previous page does not appear
even if you select [Previous page], select
[Window List] from the options menu and
select the page you want to return to from
the list.
To quit Internet Browser
Press HOME.
You can check website information by
pressing DISPLAY. The display
information differs depending on the
website and page status.
A Page title
B Page address
C Cursor
Move by pressing B/V/v/b. Place the
cursor on the link you want to view,
then press . The linked website is
displayed.
D SSL icon
Appears when the linked URL is
secured.
E Signal strength indicator
Appears when the system is connected
to a wireless network.
F Progress bar/Loading icon
Appears when the page is being read,
or during file download/transfer.
G Text input field
Press , then choose [Input] from the
options menu to open the software
keyboard.
H Scroll bar
Press B/V/v/b to move the page
display left, up, down, or right.
Note
Internet Browser
display
42
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\080OTH.fm
masterpage: Left
Various settings and operations are
available by pressing OPTIONS.
The available items differ depending on the
situation.
Available options
[Browser Setup]
Displays the Internet Browser settings.
• [Zoom]: Increases or decreases the size of
the displayed contents.
• [JavaScript Setup]: Sets whether to enable
or disable JavaScript.
• [Cookie Setup]: Sets whether or not to
accept browser cookies.
• [SSL Alarm Display]: Sets whether to
enable or disable SSL.
[Window List]
Displays a list of all current opened websites.
Allows you to return to a previous displayed
website by selecting the window.
[Bookmark List]
Displays the bookmark list.
[URL entry]
Allows you to enter a URL when the
software keyboard is displayed.
[Previous page]
Moves to a previous displayed page.
[Next page]
Moves to the previous displayed next page.
[Cancel loading]
Stops loading a page.
[Reload]
Reloads the same page.
[Add to Bookmark]
Adds the current displayed website to the
bookmark list.
[Set as start page]
Sets the current displayed website as the
default start page.
[Open in new window]
Opens a link in a new window.
[Character encoding]
Sets the character encoding system.
[Display certificate]
Displays server certificates sent from pages
that support SSL.
[Input]
Displays the software keyboard to enter
characters while browsing a website.
[Break]
Moves the cursor to the next line in the text
input field.
[Delete]
Erases one character on the left side of the
cursor during text input.
43
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Right
Settings and Adjustments
Using the Setup Display
You can make various adjustments to items
such as picture and sound.
The default settings are underlined.
Playback settings stored in the disc take priority
over the Setup Display settings. Therefore, some
of the functions may not be performed.
1 Press HOME.
The home menu appears on the TV
screen.
2 Press B/b to select [Setup].
3 Press V/v to select the setup
category icon, then press .
[Network Update]
By updating your software to the latest
version, you can take advantage of the
newest functions.
For information about update functions,
refer to the following website:
http://support.sony-europe.com/
During a software update, “UPDATE”
appears in the front panel display. After the
update completes, the unit automatically
turns off.
While the updating operation is in progress,
do not turn on or off the unit, or operate the
unit or TV. Wait for the software update to
complete.
Settings and Adjustments
Note
Icon Explanation
[Network Update]
(page 43)
Updates the software of the
system.
[Screen Settings]
(page 44)
Makes the screen settings
according to the type of TV.
[Audio Settings]
(page 45)
Makes the audio settings
according to the type of
connecting jacks.
[BD/DVD Viewing
Settings] (page 46)
Makes detailed settings for
BD/DVD playback.
[Parental Control
Settings] (page 47)
Makes detailed settings for
the Parental Control
function.
[System Settings]
(page 47)
Makes the system-related
settings.
[Network Settings]
(page 48)
Makes detailed settings for
Internet and network.
[Easy Network Settings]
(page 49)
Runs [Easy Network
Settings] to make the basic
network settings.
[Resetting] (page 49)
Resets the system to the
factory settings.
Icon Explanation
44
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Left
[Screen Settings]
x [3D Output Setting]
[Auto]
: Normally select this.
[Off]: Select this to display all contents in
2D.
x [TV Screen Size Setting for 3D]
Sets the screen size of your 3D-compatible
TV.
x [TV Type]
[16:9]
: Select this when connecting to a
wide-screen TV or a TV with a wide-mode
function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide-mode function.
x [Screen Format]
[Full]
: Select this when connecting to a TV
with a wide-mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on
a wide-screen TV.
[Normal]: Changes the picture size to fit
the screen size with the original picture
aspect ratio.
x [DVD Aspect Ratio]
[Letter Box]
: Displays a wide picture with
black bands on the top and bottom.
a
[Pan & Scan]: Displays a full-height
picture on the entire screen, with trimmed
sides.
x [Cinema Conversion Mode]
[Auto]
: Normally select this. The unit
automatically detects whether the material
is video-based or film-based, and switches
to the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be
selected regardless of the material.
x [Output Video Resolution]
[Auto]
: Outputs video signal according to
the resolution of the TV or connected
equipment.
[Original Resolution]: Outputs video signal
according to the resolution recorded on the
disc. (When the resolution is lower than SD
resolution, it is scaled up to SD resolution.)
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution setting.
* If the color system of your disc is NTSC, the
video signals resolution can be converted to
[480i] and [480p] only.
45
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Right
Settings and Adjustments
x [BD-ROM 24p Output]
[Auto]
: Outputs 24p video signals only
when you connect a 1080/24p-compatible
TV via an HDMI connection and the
[Output Video Resolution] is set to [Auto]
or [1080p].
[On]: Select this when your TV is
compatible with 1080/24p video signals.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [DVD-ROM 24p Output]
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-compatible
TV via an HDMI connection and the
[Output Video Resolution] is set to [Auto]
or [1080p].
[Off]
: Select this when your TV is not
compatible with 1080/24p video signals.
x [YCbCr/RGB (HDMI)]
[Auto]
: Automatically detects the type of
external equipment, and switches to the
matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Select this when connecting to an
equipment with an HDCP compliant DVI
jack.
x [HDMI Deep Colour Output]
[Auto]
: Normally select this.
[16bit], [12bit], [10bit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Colour.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
x [Pause Mode] (BD/DVD VIDEO/
DVD-R/DVD-RW only)
[Auto]
: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Frame]: The picture, including subjects
that do not move dynamically, is output in
high resolution.
[Audio Settings]
x [BD Audio MIX Setting]
[On]
: Outputs the audio obtained by mixing
the interactive audio and secondary audio
to the primary audio.
[Off]: Outputs the primary audio only.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
[Auto]
: Performs playback at the dynamic
range specified by the disc (BD-ROM
only).
[On]: The system reproduces the sound
track with the kind of dynamic range that
the recording engineer intended.
[Off]: No compression of dynamic range.
x [Attenuate - AUDIO]
Distortion may occur when you listen to an
equipment connected to the AUDIO IN
(L/R) jacks. You can prevent distortion by
attenuating the input level on the unit.
[On]
: Attenuates the input level. The output
level will decrease at this setting.
[Off]: Normal input level.
46
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Left
x [Audio Output]
You can select the output method where the
audio signal is output.
[Speaker]: Outputs multi-channel sound
from the system’s speakers only.
[Speaker + HDMI]
: Outputs multi-channel
sound from the system’s speakers and
2-channel linear PCM signals from the
HDMI (OUT) jack.
[HDMI]: Outputs sound from the HDMI
(OUT) jack only. Sound format depends on
the connected equipment.
• When [Control for HDMI] is set to [On]
(page 47), [Audio Output] is set to [Speaker +
HDMI] automatically and this setting cannot be
changed.
• When [Audio Output] is set to [HDMI], the
output signal format for the “TV” function is
2-channel linear PCM.
x [Sound Effect]
You can turn on or off the system’s sound
effects (SOUND MODE setting
(page 21)).
[Sound Mode On]
: Enables the surround
effect of the sound mode
(page 21) and
Football mode (page 22).
[2ch Stereo]: This system outputs the sound
from the front left/right speakers and
subwoofer only. Multi-channel surround
formats are downmixed to 2-channel.
[Off]: The sound effects are disabled. You
can hear sound as it is recorded.
x [Speaker Settings]
To obtain optimum surround sound, set the
speakers. For details, see “Setting the
Speakers” (page 38).
x [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the Bluetooth device
supports AAC.
[Off]
: SBC audio.
You can enjoy high quality sound if the AAC is
enabled. In case you cannot listen to AAC sound
from your device, select [Off].
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
You can select the default menu language
for BD-ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to “Language Code List”
(page 63).
x [Audio Language]
You can select the default track language
for BD-ROMs or DVD VIDEOs.
When you select [Original], the language
given priority in the disc is selected.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to “Language Code List”
(page 63).
Note
Note
47
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Right
Settings and Adjustments
x [Subtitle Language]
You can select the default subtitle language
for BD-ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to “Language Code List”
(page 63).
x [BD Hybrid Disc Playback Layer]
[BD]
: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]
: Prohibits Internet
connection.
[Parental Control
Settings]
x [Password]
Set or change the password for the Parental
Control function. A password allows you to
set a restriction on BD-ROM, DVD
VIDEO, or Internet video playback. If
necessary, you can differentiate the
restriction levels for BD-ROMs and DVD
VIDEOs.
x [Parental Control Area Code]
Playback of some BD-ROMs or DVD
VIDEOs can be limited according to the
geographic area. Scenes may be blocked or
replaced with different scenes. Follow the
on-screen instructions and enter your four-
digit password.
x [BD Parental Control]/[DVD
Parental Control]/[Internet Video
Parental Control]
By setting Parental Control, scenes can be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter
your four-digit password.
x [Internet Video Unrated]
[Allow]
: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
[System Settings]
x [OSD Language]
You can select the language you want for
the system on-screen display.
x [Main Unit illumination]
[On]
: The front panel display is always
turned on and the brightness of the LED
indicator is the maximum.
[Auto]: The front panel display is turned
off and the brightness of LED indicator is
reduced automatically if you do not operate
the system for about 10 seconds.
x [HDMI Settings]
[Control for HDMI]
[On]
: Turns on the [Control for HDMI]
function. You can operate mutually
between equipment that are connected with
an HDMI cable.
[Off]: Off.
48
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Left
[Audio Return Channel]
This function is available when you
connect the system to a TV’s HDMI IN
jack that is compatible with the Audio
Return Channel function and [Control for
HDMI] is set to [On].
[Auto]
: The system can receive the digital
audio signal of the TV automatically via an
HDMI cable.
[Off]: Off.
When you set the [Quick Start Mode] to [On], the
[Control for HDMI] is automatically set to [Off].
x [Quick Start Mode]
[On]: Shortens the startup time from
standby mode. You can operate the system
quickly after turning it on.
[Off]
: The default setting.
When you set the [Control for HDMI] or [Remote
Start] to [On], the [Quick Start Mode] is
automatically set to [Off].
x [Auto Standby]
[On]
: Turns on the [Auto Standby]
function. When you do not operate the
system for about 30 minutes, the system
enters standby mode automatically.
[Off]: Off.
x [Auto Display]
[On]
: Automatically displays information
on the screen when changing the viewing
titles, picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Screen Saver]
[On]
: Turns on the screen saver function.
[Off]: Off.
x [Software Update Notification]
[On]
: Sets the system to inform you of
latest software version information
(page 43).
[Off]: Off.
x [Gracenote Settings]
[Auto]
: Automatically downloads disc
information when you stop playback of the
disc. To download, the system must be
connected to the network.
[Manual]: Downloads disc information
when [Video Search] or [Music Search] is
selected.
x [System Information]
You can display the system’s software
version information and the MAC address.
x [Software License Information]
You can display the Software License
Information.
[Network Settings]
x [Internet Settings]
Connect the system to the network
beforehand. For details, see “Step 3:
Preparing for Network Connection”
(page 18).
[Wired Setup]
: Select this when you
connect to a broadband router using a LAN
cable.
[Wireless Setup(built-in)]: Select this when
you use the built-in wireless LAN of the
system for wireless network connection.
For further details, visit the following website and
check the FAQ:
http://support.sony-europe.com/
Note
Note
Tip
49
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Right
Settings and Adjustments
x [Network Connection Status]
Displays the current network connection
status.
x [Network Connection
Diagnostics]
You can run the network diagnostic to
check if the network connection has been
made properly.
x [Connection Server Settings]
Sets whether or not to display the
connected DLNA server.
x [Renderer Set-up]
[Automatic Access Permission]: Sets
whether or not to allow automatic access
from a newly detected DLNA controller.
[Smart Select]: Allows a Sony DLNA
controller to find the system as the target
equipment to operate by using the infrared
ray. You can set this function to on or off.
[Renderer Name]: Displays the system’s
name as it is listed on other DLNA devices
on the network.
x [Renderer Access Control]
Sets whether or not to accept commands
from DLNA controllers.
x [PARTY Auto Start]
[On]
: Starts a PARTY or joins an existing
PARTY at the request of a networked
device compatible with the PARTY
STREAMING function.
[Off]: Off.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
To use this function, be sure to perform the
software update (page 43).
x [Remote Start]
[On]: Allows turn on the system by a
device linked via network when the system
is in standby mode.
[Off]
: The system cannot be turned on by a
device linked via network.
When you set the [Quick Start Mode] to [On], the
[Remote Start] is automatically set to [Off].
[Easy Network
Settings]
Runs [Easy Network Settings] to make the
basic network settings. Follow the on-
screen instructions.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the system settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x [Initialise Personal Information]
You can erase your personal information
stored in the system.
Note
Note
50
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
Precautions
On safety
Should any solid object or liquid fall into
the cabinet, unplug the system and have it
checked by qualified personnel before
operating it any further.
Do not touch the AC power cord (mains
lead) with wet hands. Doing so may cause
an electric shock.
On power sources
If you are not going to use the system for a
long time, be sure to disconnect the system
from the wall outlet. To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.
On placement
Place the system in a location with
adequate ventilation to prevent heat
build-up in the system.
Although the unit heats up during
operation, this is not a malfunction. If you
continuously use this unit at a large
volume, the cabinet temperature of the
top, side and bottom rises considerably.
To avoid burning yourself, do not touch
the cabinet.
Do not place the unit on a soft surface
(rugs, blankets, etc.) that might block the
ventilation holes.
Do not install the system near heat
sources such as radiators, air ducts, or in
a place subject to direct sunlight,
excessive dust, mechanical vibration, or
shock.
Do not install the system in an inclined
position. It is designed to be operated in a
horizontal position only.
Keep the system and discs away from
components with strong magnets, such as
microwave ovens, or large loudspeakers.
Do not place heavy objects on the system.
Do not place metal objects in front of the
front panel. It may limit reception of
radio waves.
Do not place the system in a place where
medical equipment is in use. It may cause
a malfunction of medical equipment.
If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device
before using the wireless LAN function.
On operation
If the system is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the unit. Should this occur, the
system may not operate properly. In this
case, remove the disc and leave the system
turned on for about half an hour until the
moisture evaporates.
On adjusting volume
Do not turn up the volume while listening
to a section with very low level inputs or no
audio signals. If you do, the speakers may
be damaged when a peak level section is
suddenly played.
On cleaning
Clean the cabinet, panel, and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On cleaning discs, disc/lens
cleaners
Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
Additional Information
51
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
On replacement of parts
In the events that this system is repaired,
repaired parts may be retained for reuse or
recycling purposes.
On your TV’s color
If the speakers cause the color irregularity
on your TV screen, turn off the TV then
turn it on after 15 to 30 minutes. If color
irregularity persist, place the speakers
further away from the TV set.
On moving the system
Before moving the system, make sure that
there is no disc inserted, and disconnect the
AC power cord (mains lead) from the wall
outlet (mains).
On Bluetooth
communication
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become
shorter under the following conditions.
When a person, metal object, wall or
other obstruction is between the devices
with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
– Locations where other electromagnetic
waves occur
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Use this unit at least 10 meters away
from the wireless LAN device.
– Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
– Install this unit and Bluetooth device as
closer to each other as possible.
The radio waves broadcast by this unit
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn off
the power on this unit and Bluetooth
device in the following locations:
In hospitals, on trains, in airplanes, at
gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
IMPORTANT NOTICE
Caution: This system is capable of
holding a still video image or on-screen
display image on your TV screen
indefinitely. If you leave the still video
image or on-screen display image
displayed on your TV for an extended
period of time, you risk permanent
damage to your TV screen. Plasma
display panel televisions and projection
televisions are especially susceptible to
this.
52
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
This unit supports security functions that
comply with the Bluetooth specification
to ensure secure connection during
communication using Bluetooth
technology. However, this security may
be insufficient depending on the setting
contents and other factors, so always be
careful when performing communication
using Bluetooth technology.
Sony cannot be held liable in any way for
damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Bluetooth communication is not
necessarily guaranteed with all Bluetooth
devices that have the same profile as this
unit.
Bluetooth devices connected with this
unit must comply with the Bluetooth
specification prescribed by the Bluetooth
SIG, Inc., and must be certified to
comply. However, even when a device
complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may cut off
depending on the Bluetooth device
connected with this unit, the
communications environment, or
surrounding conditions.
If you have any questions or problems
concerning your system, please consult
your nearest Sony dealer.
Notes about Discs
On handling discs
To keep the disc clean, handle the disc by
its edge. Do not touch the surface.
Do not stick paper or tape on the disc.
Do not expose the disc to direct sunlight
or heat sources such as hot air ducts, or
leave it in a car parked in direct sunlight
as the temperature may rise considerably
inside the car.
After playing, store the disc in its case.
On cleaning
Before playing, clean the disc with a
cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine,
thinner, commercially available cleaners,
or anti-static spray intended for vinyl
LPs.
This system can only play a standard
circular disc. Using neither standard nor
circular discs (e.g., card, heart, or star
shape) may cause a malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a
label or ring.
53
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
The power does not turn on.
t Check that the AC power cord (mains
lead) is connected securely.
The remote control does not function.
t The distance between the remote
control and the unit is too far.
t The batteries in the remote control are
weak.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
t Try the following:
1 Hold down N and Z on the unit
for more than 5 seconds to open the
disc tray.
2 Remove the disc.
3 Disconnect the AC power cord
(mains lead) from the wall outlet
(mains), then reconnect after
several minutes.
The system does not work normally.
t Disconnect the AC power cord (mains
lead) from the wall outlet (mains), then
reconnect after several minutes.
[A new software version is available.
Please go to the “Setup” section of
the menu and select “Network
Update” to perform the update.]
appears on the TV screen.
t See [Network Update] (page 43) to
update the system to a latest software
version.
“PRTECT”, “PUSH” and “POWER”
appear alternately in the front panel
display.
t Press "/1 to turn off the system, and
check the following items after
“STBY” disappears.
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes of the system?
After checking the above items and
fixing any problems, turn on the
system. If the cause of the problem
cannot be found even after checking
all the above items, consult your
nearest Sony dealer.
“LOCKED” appears in the front panel
display.
t Set the child lock function to off
(page 40).
“D. LOCK” appears in the front panel
display.
t Contact your nearest Sony dealer or
local authorized Sony service facility.
“Exxxx” (x is a number) appears in
the front panel display.
t Contact your nearest Sony dealer or
local authorized Sony service facility
and give the error code.
General
Messages
54
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
appears without any messages on
the entire TV screen.
t Contact your nearest Sony dealer or
local authorized Sony service facility.
There is no picture or the picture is
not output correctly.
t Check the output method on your
system (page 16).
t Hold down N and VOL – on the unit
for more than 5 seconds to reset the
video output resolution to the lowest
resolution.
t For BD-ROMs, check the [BD-ROM
24p Output] settings in [Screen
Settings] (page 45).
There is no picture when you make an
HDMI cable connection.
t The unit is connected to an input
device that is not HDCP (High-
bandwidth Digital Content Protection)
compliant (“HDMI” in the front panel
does not light up) (page 16).
The dark area of the picture is too
dark/the bright area is too bright or
unnatural.
t Set [Picture Quality Mode] to
[Standard] (default) (page 33).
Picture noise appears.
t Clean the disc.
t If the picture output from your system
goes through your VCR to get to your
TV, the copy-protection signal applied
to some BD/DVD programs could
affect picture quality. If you still
experience problems even when you
connect your unit directly to your TV,
try connecting your unit to the other
input jacks.
An image is not displayed on the
entire TV screen.
t Check the setting of [TV Type] in
[Screen Settings] (page 44).
t The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
t If the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters from the
TV set.
t If the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
t Make sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
There is no sound.
t The speaker cords are not connected
securely.
t Check the speaker settings (page 38).
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
t Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page 47). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 48).
t Make sure that your TV is compatible
with the Audio Return Channel
function.
t Make sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
Picture
Sound
55
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
The system does not output sound of
TV programs correctly when
connected to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 48).
t Check the connections (page 17).
Severe hum or noise is heard.
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
t Select stereo sound by pressing
AUDIO (page 34).
Distortion occurs in the sound of a
connected equipment.
t Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 45).
A sudden loud music is heard.
t The build-in sound demonstration is
activated. Press
2 – to reduce the
volume or press x to stop the
demonstration.
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
The disc does not play.
t The region code on the BD/DVD does
not match the system.
t Moisture has condensed inside the unit
and may cause damage to the lenses.
Remove the disc and leave the unit
turned on for about half an hour.
t The system cannot play a recorded disc
that is not correctly finalized
(page 58).
File names are not displayed
correctly.
t The system can only display ISO
8859-1 compliant character formats.
Other character formats may be
displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
A disc does not start playing from the
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from start],
then press .
Playback does not start from the
resume point where you last stopped
playing.
t The resume point may be cleared from
memory depending on the disc when
you open the disc tray.
you disconnect the USB device.
you play other content.
you turn off the unit.
Tuner
Playback
56
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or
DVD being played.
Bonus contents or other data that are
contained in a BD-ROM cannot be
played.
t Try the following:
1 Remove the disc.
2 Turn the system off.
3 Remove and reconnect the USB
device (page 25).
4 Turn the system on.
5 Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB
device.
3 Turn the system on.
t Make sure that the USB device is
securely connected to the (USB)
port.
t Check if the USB device or a cable is
damaged.
t Check if the USB device is on.
t If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the unit.
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fast-motion or dark
scenes.
t Picture/sound quality may be poor
depending on Internet content
providers.
t Picture/sound quality may be
improved by changing the connection
speed. Sony recommends a connection
speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-
definition video.
t Not all videos contain sound.
The picture is small.
t Press V to zoom in.
The [Control for HDMI] function does
not work (“BRAVIA” Sync).
t Check that [Control for HDMI] is set
to [On] (page 47).
t If you change the HDMI connection,
turn the system off and on again.
t If power failure occurs, set [Control
for HDMI] to [Off], then set [Control
for HDMI] to [On] (page 47).
t Check the following and refer to the
operating instructions supplied with
the equipment.
The connected equipment is
compatible with the [Control for
HDMI] function.
The connected equipment’s setting
for the [Control for HDMI] function
is correct.
USB device
BRAVIA Internet Video
“BRAVIA” Sync
([Control for HDMI])
57
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
The system cannot connect to the
network.
t Check the network connection
(page 18) and the network settings
(page 48).
You cannot connect your PC to the
Internet after [Wi-Fi Protected Setup
(WPS)] is performed.
t The wireless settings of the router may
change automatically if you use the
Wi-Fi Protected Setup function before
adjusting the settings of the router. In
this case, change the wireless settings
of your PC accordingly.
The system cannot connect to the
network or the network connection is
unstable.
t Check if the wireless LAN router is on.
t Check the network connection
(page 18) and the network settings
(page 48).
t Depending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles
between the system and the wireless
LAN router, the possible
communication distance may be
shortened. Move the system and the
wireless LAN router closer to each
other.
t Devices that use a 2.4 GHz frequency
band, such as a microwave, Bluetooth,
or digital cordless device, may
interrupt communication. Move the
unit away from such devices, or turn
off such devices.
t The wireless LAN connection may be
unstable depending on the usage
environment, especially while using
the Bluetooth function of the system.
In this case, adjust the usage
environment.
The wireless router you want is not
shown in the wireless network list.
t Press RETURN to return to the
previous screen, and try [Wireless
Setup(built-in)] again. If the wireless
router you want is still not detected,
select [Add a new address.] from the
network list, then select [Manual
Registration] to input a network name
(SSID) manually.
Pairing cannot be done.
t Move the Bluetooth device closer to
the unit.
t Pairing may not be possible if other
Bluetooth devices are present around
the unit. In this case, turn off the other
Bluetooth devices.
t Delete the system from your Bluetooth
device and perform pairing again
(page 26).
Connecting cannot be done.
t The pairing registration information
has been erased. Perform the pairing
operation again (page 26).
Network connection
Wireless LAN
connection
Bluetooth device
58
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
There is no sound.
t Make sure this system is not too far
from the Bluetooth device, or this
system is not receiving interference
from a Wi-Fi network, other 2.4 GHz
wireless device, or microwave oven.
t Check that the Bluetooth connection is
made properly between this system
and the Bluetooth device.
t Pair this system and the Bluetooth
device again.
t Keep the system away from metal
objects or surfaces.
t Make sure “BT” function is selected.
t Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
unit.
The sound skips or fluctuates, or the
connection is lost.
t The unit and the Bluetooth device are
too far apart.
t If there are obstacles between the unit
and your Bluetooth device, remove or
avoid the obstacles.
t If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Playable Discs
1)
Since Blu-ray Disc specifications are new and
evolving, some discs may not be playable
depending on the disc type and version. Also,
the audio output differs depending on the
source, connected output jack, and selected
audio settings.
2)
BD-RE: Ver.2.1
BD-R: Ver.1.1, 1.2, 1.3 including organic
pigment type BD-R (LTH type)
BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
3)
A CD or DVD disc will not play if it has not
been correctly finalized. For more information,
refer to the operating instructions supplied with
the recording device.
Discs that cannot be played
BDs with cartridge
BDXLs
DVD-RAMs
HD DVDs
DVD Audio discs
PHOTO CDs
Data part of CD-Extras
Super VCDs
Audio material side on DualDiscs
Notes on discs
This product is designed to play back discs
that conform to the Compact Disc (CD)
standard.
DualDiscs and some music discs encoded
with copyright protection technologies do
not conform to the Compact Disc (CD)
standard. Therefore, these discs may not be
compatible with this product.
Note on playback
operations of a BD/DVD
Some playback operations of a BD/DVD
may be intentionally set by software
producers. Since this system plays a
BD/DVD according to the disc contents the
software producers designed, some
playback features may not be available.
Blu-ray Disc
BD-ROM
1)
BD-R/BD-RE
2)
DVD
3)
DVD-ROM
DVD-R/DVD-RW
DVD+R/DVD+RW
CD
3)
CD-DA (Music CD)
CD-ROM
CD-R/CD-RW
59
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
Note on double-layer
BDs/DVDs
The playback picture and sound may be
momentarily interrupted when the layers
switch.
Region code (BD-ROM/DVD
VIDEO only)
Your system has a region code printed on
the bottom of the unit and will only play a
BD-ROM/DVD VIDEO (playback only)
labeled with identical region codes or .
Playable Types of Files
Video
Music
Photo
*1
The system may not play this file format on a
DLNA server.
*2
The system can only play standard definition
video on a DLNA server.
*3
The system does not play DTS format files on
a DLNA server.
*4
The system can only play Dolby Digital
format files on a DLNA server.
*5
The system can support AVC up to Level 4.1.
*6
The system does not play this file format on a
DLNA server.
*7
The system can play AVCHD Ver.2.0 format
(AVCHD 3D/Progressive).
*8
The system plays AVCHD format files that are
recorded on a digital video camera, etc.
The AVCHD format disc will not play if it has
not been correctly finalized.
*9
The system does not play animated PNG or
animated GIF files.
*10
For MPO files other than 3D, the key image or
the first image is displayed.
Video Codec Container Extension
MPEG-1 Video
*1
PS .mpg, .mpeg
MPEG-2 Video
*2
PS
*3
.mpg, .mpeg
TS
*4
.m2ts, .mts
Xvid AVI .avi
MKV .mkv
MPEG4/AVC
*5
MKV
*1
.mkv
MP4
*1
.mp4, .m4v
TS
*1
.m2ts, .mts
Quick
Time
*6
.mov
3gpp/
3gpp2
*6
.3gp, .3g2,
.3gpp, .3gp2
VC1
*1
TS .m2ts, .mts
WMV9
*1
ASF .wmv, .asf
Motion JPEG
*6
Quick
Time
.mov
AVI .avi
Video Format Container Extension
AVCHD
*1*7
AVCHD Format
Folder
*8
ALL
Audio Codec Extension
MP3 (MPEG-1 Audio
Layer III)
.mp3, .mka
*6
AAC
*1
.m4a, .aac
*6
, .mka
*6
WMA9 Standard
*1
.wma
LPCM .wav, .mka
*6
FLAC
*6
.flac, .fla
AC3
*6
.ac3, .mka
Photo Format Extension
JPEG .jpeg, .jpg, .jpe
PNG .png
*9
GIF .gif
*9
MPO .mpo
*6*10
60
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
• Some files may not play depending on the file
format, the file encoding, the recording
condition, or DLNA server condition.
• Some files edited on a PC may not play.
• Some files may not be able to perform fast
forward or fast reverse function.
• The system does not play coded files such as
DRM and Lossless.
The system can recognize the following files or
folders in BDs, DVDs, CDs and USB devices:
up to folders in the 9th layer (including the
root folder)
up to 500 files/folders in a single layer
The system can recognize the following files or
folders stored in the DLNA server:
up to folders in the 19th layer
up to 999 files/folders in a single layer
• The system can support frame rate:
up to 60 fps for AVCHD only.
up to 30 fps for other video codecs.
• The system can support video bit rate up to
40 Mbps.
• The system can support video resolution up to
1920 × 1080p.
• Some USB devices may not work with this
system.
• The system can recognize Mass Storage Class
(MSC) devices (such as flash memory or an
HDD), Still Image Capture Devices (SICDs),
and 101-key keyboards.
The system may not play high bit rate video files
from a DATA CD smoothly. It is recommended
to play high bit rate video files using a DATA
DVD or DATA BD.
Supported Audio
Formats
Audio formats supported by this system are
as follows.
a: Supported format.
–: Unsupported format.
* Decoded as DTS core.
For LPCM 2ch format, the supported sampling
frequency of the digital signal is up to 48 kHz
when using the “TV” function.
Note
Format
Function
“BD/DVD” “TV”
(DIGITAL IN)
LPCM 2ch
aa
LPCM 5.1ch,
LPCM 7.1ch
a
Dolby Digital
aa
Dolby TrueHD,
Dolby Digital
Plus
a
DTS
aa
DTS-ES
Discrete 6.1,
DTS-ES Matrix
6.1
a* a*
DTS96/24
aa*
DTS-HD High
Resolution
Audio
a
DTS-HD Master
Audio
a
Note
61
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
Specifications
Amplifier Section
POWER OUTPUT (rated)
Front L/Front R:
40 W + 40 W (at 3 ohms, 1 kHz,
1% THD)
POWER OUTPUT (reference)
Front L/Front R:
40 W (per channel at 3 ohms, 1 kHz)
Subwoofer:
70 W (at 6 ohms, 80 Hz)
Inputs (Analog)
AUDIO IN
Sensitivity: 2 V/700 mV
Inputs (Digital)
TV (Audio Return Channel/OPTICAL)
Supported formats: LPCM 2CH (up to
48 kHz), Dolby Digital, DTS
HDMI Section
Connector
Type A (19pin)
BD/DVD/CD System
Signal format system
NTSC/PAL
USB Section
(USB) port:
Type A (For connecting USB memory,
memory card reader, digital still camera,
and digital video camera)
LAN Section
LAN (100) terminal
100BASE-TX Terminal
Wireless LAN Section
Standards Compliance
IEEE 802.11 b/g/n
Frequency and Channel
2.4 GHz band: channels 1–13
Bluetooth Section
Communication system
Bluetooth Specification version 3.0
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
Supported Codecs
3)
SBC
4)
, AAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
44.1 kHz, 48 kHz)
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, cordless phone, reception
sensitivity, antenna’s performance, operating
system, software application, etc.
2)
Bluetooth standard profiles indicate the purpose
of Bluetooth communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
FM Tuner Section
System
PLL quartz-locked digital synthesizer
Tuning range
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
62
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
Speakers
Front (SS-TSB121)
Dimensions (w/h/d) (approx.)
95 mm × 189 mm × 80 mm
Mass (approx.)
0.49 kg (with speaker cord)
Subwoofer (SS-WSB121)
Dimensions (w/h/d) (approx.)
177 mm × 280 mm × 245 mm
Mass (approx.)
2.7 kg (with speaker cord)
General
Power requirements
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 60 W
Standby: 0.3 W (For details on the
setting, see page 40.)
Dimensions (w/h/d) (approx.)
430 mm × 50.5 mm × 296 mm incl.
projecting parts
Mass (approx.)
2.6 kg
Design and specifications are subject to
change without notice.
• Standby power consumption: 0.3W
• Over 85% power efficiency of amplifier
block is achieved with the full digital
amplifier, S-Master.
63
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language Code Language Code Language Code Language
1027 Afar 1183 Irish 1347 Maori 1507 Samoan
1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona
1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali
1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian
1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian
1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati
1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho
1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese
1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish
1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili
1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil
1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu
1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik
1066 Bengali; 1248 Indonesian 1393 Occitan 1528 Thai
Bangla 1253 Icelandic 1403 (Afan)Oromo 1529 Tigrinya
1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen
1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog
1079 Catalan 1261 Japanese 1428 Polish 1534 Setswana
1093 Corsican 1269 Yiddish 1435 Pashto; 1535 Tonga
1097 Czech 1283 Javanese Pushto 1538 Turkish
1103 Welsh 1287 Georgian 1436 Portuguese 1539 Tsonga
1105 Danish 1297 Kazakh 1463 Quechua 1540 Tatar
1109 German 1298 Greenlandic 1481 Rhaeto- 1543 Twi
1130 Bhutani 1299 Cambodian Romance 1557 Ukrainian
1142 Greek 1300 Kannada 1482 Kirundi 1564 Urdu
1144 English 1301 Korean 1483 Romanian 1572 Uzbek
1145 Esperanto 1305 Kashmiri 1489 Russian 1581 Vietnamese
1149 Spanish 1307 Kurdish 1491 Kinyarwanda 1587 Volapük
1150 Estonian 1311 Kirghiz 1495 Sanskrit 1613 Wolof
1151 Basque 1313 Latin 1498 Sindhi 1632 Xhosa
1157 Persian 1326 Lingala 1501 Sangho 1665 Yoruba
1165 Finnish 1327 Laothian 1502 Serbo-Croatian 1684 Chinese
1166 Fiji 1332 Lithuanian 1503 Singhalese 1697 Zulu
1171 Faroese 1334 Latvian; 1505 Slovak
1174 French Lettish 1506 Slovenian
1181 Frisian 1345 Malagasy 1703 Not specified
64
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Left
Parental Control/Area Code List
Code Area Code Area Code Area Code Area
2044 Argentina 2109 Germany 2362 Mexico 2499 Sweden
2047 Australia 2200 Greece 2376 Netherlands 2086 Switzerland
2046 Austria 2219 Hong Kong 2390 New Zealand 2543 Taiwan
2057 Belgium 2248 India 2379 Norway 2528 Thailand
2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United
2090 Chile 2239 Ireland 2424 Philippines Kingdom
2092 China 2254 Italy 2428 Poland
2093 Colombia 2276 Japan 2436 Portugal
2115 Denmark 2304 Korea 2489 Russia
2165 Finland 2333 Luxembourg 2501 Singapore
2174 France 2363 Malaysia 2149 Spain
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\010COVIX.fm
masterpage: Right
65
GB
BDV-EF1100
4-446-737-11(1)
Additional Information
Index
Numerics
3D 24
3D Output Setting 44
A
A/V SYNC 34
Attenuate - AUDIO 45
Audio DRC 45
Audio Language 46
Audio Output 46
Audio Return Channel 48
Audio Settings 45
Auto Display 48
Auto Standby 48
B
BD Audio MIX Setting 45
BD Hybrid Disc Playback Layer 47
BD Internet Connection 47
BD Parental Control 47
BD/DVD Menu Language 46
BD/DVD Viewing Settings 46
BD-LIVE 23
BD-ROM 24p Output 45
Bluetooth 25
BONUSVIEW 23
BRAVIA Sync 37
C
CD 58
Child Lock 40
Cinema Conversion Mode 44
Connection Server Settings 49
Control for HDMI 37, 47
D
DLNA 30, 49
Dolby Digital 34
DTS 34
DVD 58
DVD Aspect Ratio 44
DVD Parental Control 47
DVD-ROM 24p Output 45
E
Easy Network Settings 49
Easy Setup 20
F
FM Mode 35
Front panel 10
Front panel display 11
G
Gracenote Settings 48
H
HDMI
YCbCr/RGB (HDMI) 45
HDMI Deep Colour Output 45
I
Initialise Personal Information 49
Internet content 29
Internet Settings 48
Internet Video Parental Control 47
Internet Video Unrated 47
L
Language Code List 63
66
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\010COVIX.fm
masterpage: Left
M
Main Unit illumination 47
Multiplex broadcast sound 35
N
Network Connection Diagnostics 49
Network Settings 48
Network Update 43
NFC 27
O
OSD Language 47
P
Parental Control Area Code 47
Parental Control Settings 47
PARTY Auto Start 49
Password 47
Pause Mode 45
Play information 24
Playable discs 58
Q
Quick Start Mode 48
R
RDS 37
Rear panel 11
Region code 59
Registered Remote Devices 49
Remote control 12
Remote Start 49
Renderer Access Control 49
Renderer Set-up 49
Reset to Factory Default Settings 49
Resetting 49
S
Screen Format 44
Screen Saver 48
Screen Settings 44
SLEEP 39
Slideshow 33
Software License Information 48
Sound Effect 46
Speaker Settings 38, 46
Distance 38
Level 39
Subtitle Language 47
System Information 48
T
Test Tone 39
TV Screen Size Setting for 3D 44
TV Type 44
U
Update 43
USB 25
W
WEP 19
WPA2-PSK (AES) 19
WPA2-PSK (TKIP) 19
WPA-PSK (AES) 19
WPA-PSK (TKIP) 19
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\110BCO.fm
masterpage: Left
©2013 Sony Corporation
The software of this system may be updated in the future. To find out details on any
available updates, please visit the following URL.
http://support.sony-europe.com/
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony BDV-EF1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony BDV-EF1100 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony BDV-EF1100

Sony BDV-EF1100 User Manual - German - 76 pages

Sony BDV-EF1100 Quick start guide - Dutch - 16 pages

Sony BDV-EF1100 User Manual - Dutch - 68 pages

Sony BDV-EF1100 User Manual - French - 70 pages

Sony BDV-EF1100 User Manual - Polish - 70 pages

Sony BDV-EF1100 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info