Manual Sonoro iElements (page 46 of 191) (English, German, Dutch, French, Italian, Spanish, Norwegian)

468984

Zoom out

Zoom in

1/191

English

8.2 Alarm

Your iElements can wake you up with a radio station or a pleasant alarm tone. You can set

the volume of the alarm and use the so-called snooze function.

You can set the alarm when the iElements is switched on as well as when the device is

switched off. In both cases press the menu button and then use the << and >> buttons to

navigate through the options until ALARM appears on the display. Conrm your selection by

pressing the menu button.

Now you can activate the alarm (ALM ON) or deactivate it (ALM OFF) with the + and –

buttons and conrm your selection with the menu button. If you select ALM OFF, the setting is

cancelled. You can recognise an active alarm by the small alarm symbol on the display.

When you have selected ALM ON, you can set the wake-up time. This is selected in the same

way as setting the display time with the +/- and <</>> buttons. Conrm your selection with

the menu button.

SOURCE then appears on the display and you can decide which signal you would like to be

woken by. The frequency ranges FM and AM as well as an alarm tone (BEEP) are available.

Make your selection with the << and >> buttons and conrm it with the menu button. If you

select a radio station, you can use the stations you have saved in the presets. Use the + and

- buttons to select from the 10 memory presets 0…9 for each frequency band.

VOLUME then appears on the display and you can select the alarm volume of your signal

source with the + and – buttons. As soon as the alarm starts, the volume is slowly increased

until it reaches the level you have selected. When you conrm your selection with the menu

button, the alarm has been set. ALARM ON appears on the display.

NOTE!

When setting the alarm time, please pay attention to the selected time format.

You can recognise an active alarm by the alarm symbol on the display. Before

using this function for the rst time, test the different alarm volumes to nd a

level that is suitable for you. If you have connected a device to the

headphones socket, please note that the alarm tone will only be output

through this device. This means, for example, that you may not be able to

hear the alarm if the headphones have slipped. Please make sure that you

switch off the alarm, for example, if you go on holiday.

You can switch off an active alarm by pressing the menu button for approximately two

seconds. The alarm will stop and the small alarm symbol on the display stops ashing.

If you want to temporarily suppress an active alarm rather than turning it off, you can use the

snooze function. Briey press the menu button once when the alarm is activated. SNOOZE

then appears on the display and you can use the + and – buttons to set the number of

minutes after which the alarm should be switched on again. The default setting is 5 minutes.

Once you have made your selection, please conrm it with the menu button. The small alarm

symbol on the display continues to ash and is reactivated after the time you have set. If you

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sonoro iElements in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sonoro iElements Manual

Product: