Manual Sonnenkonig VIDRO 1000 (page 50 of 56) (English, German, French, Italian)

703482

Zoom out

Zoom in

1/56

8 Operation

8.2 Activate the display

During normal operation, only the temperature is shown on the display. In ECO mode the display

switches oﬀ completely. To activate the complete display, press below the temperature display.

8.4 Setting the time

Press the setting buttons „ “ and „ “ together for 3 seconds.

First, set the weekday with the and -buttons. Conﬁrm your Choice with the button. Next,

set the hours and minutes using the same method.

8.5 Toggle Week- and Daytimer

Press the „ „ -button on the remote to choose between day or weektimer. The according set-

ting is shown on the control panel on the device with either and .

8.1 Initial setup

To use the heater, proceed as follows:

• Connect the mains cable to the power circuit.

• Press the -button on the unit or the remote control.

• Then operate the device as described below.

8.3 Thermostat

You can set the desired temperature using the thermostat. To do this, press the -button

directly on the device below the temperature display. The temperature display now ﬂashes. Use

the -buttons to set the desired temperature.

You can use the remote control to control the temperature with the -buttons and conﬁrm

your selection with the -button.

The heater is now in operation until the preset value is reached. The thermostat causes the

heater to switch on when the ambient temperature is below the preset value.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sonnenkonig VIDRO 1000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sonnenkonig VIDRO 1000 Manual

Product: